[v2] mtd: nand: fix lack of oob layout when using no ecc

Submitted by Miquel Raynal on July 10, 2017, 12:05 p.m.

Details

Message ID 20170710140519.0cb26d90@xps13
State New
Delegated to: Boris Brezillon
Headers show

Commit Message

Miquel Raynal July 10, 2017, 12:05 p.m.
Fix nand core lack of OOB layout when:
- the NFC driver does not provide any OOB layout,
- ECC operations are disabled (using NAND_ECC_NONE).
Using this configuration leads to a crash during the probe.

Add layout functions for small and large pages with mainly free bytes
plus reserved space for bad block markers.

Check the configuration and eventually assign this OOB layout in
nand_scan_tail().

Bad block markers position was extracted from the existing OOB layouts
by assigning as free all the bytes marked as ECC.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
---
 drivers/mtd/nand/nand_base.c | 61 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

Comments

Boris Brezillon July 18, 2017, 7:53 a.m.
On Mon, 10 Jul 2017 14:05:19 +0200
Miquel RAYNAL <miquel.raynal@free-electrons.com> wrote:

> Fix nand core lack of OOB layout when:
> - the NFC driver does not provide any OOB layout,
> - ECC operations are disabled (using NAND_ECC_NONE).
> Using this configuration leads to a crash during the probe.
> 
> Add layout functions for small and large pages with mainly free bytes
> plus reserved space for bad block markers.
> 
> Check the configuration and eventually assign this OOB layout in
> nand_scan_tail().
> 
> Bad block markers position was extracted from the existing OOB layouts
> by assigning as free all the bytes marked as ECC.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
> ---
>  drivers/mtd/nand/nand_base.c | 61 +++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 60 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index c5221795a1e8..98ac54c0a0a7 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -53,7 +53,38 @@ static int nand_get_device(struct mtd_info *mtd, int new_state);
>  static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
>  			     struct mtd_oob_ops *ops);
>  
> -/* Define default oob placement schemes for large and small page devices */
> +/*
> + * Define default OOB placement schemes for:
> + *   - no ECC or software ECC
> + *   - small or large page devices
> + */
> +static int nand_ooblayout_free_sp_no_ecc(struct mtd_info *mtd, int section,
> +					   struct mtd_oob_region *oobregion)
> +{
> +	if (section > 1)
> +		return -ERANGE;
> +
> +	if (!section) {
> +		if (mtd->oobsize == 16) {
> +			oobregion->offset = 0;
> +			oobregion->length = 4;
> +		} else {
> +			oobregion->offset = 0;
> +			oobregion->length = 5;
> +		}
> +	} else {
> +		oobregion->offset = 6;
> +		oobregion->length = mtd->oobsize - oobregion->offset;
> +	}
> +
> +	return 0;
> +}
> +
> +const struct mtd_ooblayout_ops nand_ooblayout_sp_no_ecc_ops = {
> +	.free = nand_ooblayout_free_sp_no_ecc,
> +};
> +EXPORT_SYMBOL_GPL(nand_ooblayout_sp_no_ecc_ops);
> +
>  static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
>  				 struct mtd_oob_region *oobregion)
>  {
> @@ -109,6 +140,23 @@ const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
>  };
>  EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
>  
> +static int nand_ooblayout_free_lp_no_ecc(struct mtd_info *mtd, int section,
> +					   struct mtd_oob_region *oobregion)
> +{
> +	if (section)
> +		return -ERANGE;
> +
> +	oobregion->offset = 2;
> +	oobregion->length = mtd->oobsize - oobregion->offset;
> +
> +	return 0;
> +}
> +
> +const struct mtd_ooblayout_ops nand_ooblayout_lp_no_ecc_ops = {
> +	.free = nand_ooblayout_free_lp_no_ecc,
> +};
> +EXPORT_SYMBOL_GPL(nand_ooblayout_lp_no_ecc_ops);
> +
>  static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
>  				 struct mtd_oob_region *oobregion)
>  {
> @@ -4635,6 +4683,17 @@ int nand_scan_tail(struct mtd_info *mtd)
>  	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
>  
>  	/*
> +	 * When using ECC_NONE, ooblayout must only reserve space for bad block
> +	 * markers.
> +	 */
> +	if (!mtd->ooblayout && ecc->mode == NAND_ECC_NONE) {
> +		if (mtd->writesize <= 512)
> +			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_no_ecc_ops);
> +		else
> +			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_no_ecc_ops);
> +	}

Just realized you were breaking existing users of ECC_NONE. Before your
patch, they were using nand_ooblayout_sp_ops for NANDs with 8 or 16 OOB
bytes, and nand_ooblayout_lp_hamming_ops for NANDs with 64 or 128
OOB bytes.

Probably better to put this in the following switch (default case).

> +
> +	/*
>  	 * If no default placement scheme is given, select an appropriate one.
>  	 */
>  	if (!mtd->ooblayout &&

Patch hide | download patch | download mbox

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c5221795a1e8..98ac54c0a0a7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -53,7 +53,38 @@  static int nand_get_device(struct mtd_info *mtd, int new_state);
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops);
 
-/* Define default oob placement schemes for large and small page devices */
+/*
+ * Define default OOB placement schemes for:
+ *   - no ECC or software ECC
+ *   - small or large page devices
+ */
+static int nand_ooblayout_free_sp_no_ecc(struct mtd_info *mtd, int section,
+					   struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		if (mtd->oobsize == 16) {
+			oobregion->offset = 0;
+			oobregion->length = 4;
+		} else {
+			oobregion->offset = 0;
+			oobregion->length = 5;
+		}
+	} else {
+		oobregion->offset = 6;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_sp_no_ecc_ops = {
+	.free = nand_ooblayout_free_sp_no_ecc,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_no_ecc_ops);
+
 static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
 				 struct mtd_oob_region *oobregion)
 {
@@ -109,6 +140,23 @@  const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
 };
 EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
 
+static int nand_ooblayout_free_lp_no_ecc(struct mtd_info *mtd, int section,
+					   struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 2;
+	oobregion->length = mtd->oobsize - oobregion->offset;
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_no_ecc_ops = {
+	.free = nand_ooblayout_free_lp_no_ecc,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_no_ecc_ops);
+
 static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
 				 struct mtd_oob_region *oobregion)
 {
@@ -4635,6 +4683,17 @@  int nand_scan_tail(struct mtd_info *mtd)
 	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
 
 	/*
+	 * When using ECC_NONE, ooblayout must only reserve space for bad block
+	 * markers.
+	 */
+	if (!mtd->ooblayout && ecc->mode == NAND_ECC_NONE) {
+		if (mtd->writesize <= 512)
+			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_no_ecc_ops);
+		else
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_no_ecc_ops);
+	}
+
+	/*
 	 * If no default placement scheme is given, select an appropriate one.
 	 */
 	if (!mtd->ooblayout &&