[RFC,2/7] s390x: chsc nt2 events are pci-only

The nt2 event class is pci-only and therefore implemented in
the s390x pci code. Properly stub it out for non-pci builds.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
 hw/s390x/s390-pci-bus.c |  4 ++--
 hw/s390x/s390-pci-bus.h |  4 ++--
 target/s390x/ioinst.c   | 18 ++++++++++++++++++
 3 files changed, 22 insertions(+), 4 deletions(-)

On 07/07/2017 02:21 PM, Cornelia Huck wrote:
> The nt2 event class is pci-only and therefore implemented in
> the s390x pci code. Properly stub it out for non-pci builds.
> 
> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> ---
>  hw/s390x/s390-pci-bus.c |  4 ++--
>  hw/s390x/s390-pci-bus.h |  4 ++--
>  target/s390x/ioinst.c   | 18 ++++++++++++++++++
>  3 files changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
> index 5651483781..eee9a04eac 100644
> --- a/hw/s390x/s390-pci-bus.c
> +++ b/hw/s390x/s390-pci-bus.c
> @@ -47,7 +47,7 @@ S390pciState *s390_get_phb(void)
>      return phb;
>  }
> 
> -int chsc_sei_nt2_get_event(void *res)
> +int pci_chsc_sei_nt2_get_event(void *res)
>  {
>      ChscSeiNt2Res *nt2_res = (ChscSeiNt2Res *)res;
>      PciCcdfAvail *accdf;
> @@ -87,7 +87,7 @@ int chsc_sei_nt2_get_event(void *res)
>      return rc;
>  }
> 
> -int chsc_sei_nt2_have_event(void)
> +int pci_chsc_sei_nt2_have_event(void)
>  {
>      S390pciState *s = s390_get_phb();
> 
> diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
> index cf142a3e68..29d3da10f6 100644
> --- a/hw/s390x/s390-pci-bus.h
> +++ b/hw/s390x/s390-pci-bus.h
> @@ -318,8 +318,8 @@ typedef struct S390pciState {
>  } S390pciState;
> 
>  S390pciState *s390_get_phb(void);
> -int chsc_sei_nt2_get_event(void *res);
> -int chsc_sei_nt2_have_event(void);
> +int pci_chsc_sei_nt2_get_event(void *res);
> +int pci_chsc_sei_nt2_have_event(void);
>  void s390_pci_sclp_configure(SCCB *sccb);
>  void s390_pci_sclp_deconfigure(SCCB *sccb);
>  void s390_pci_iommu_enable(S390PCIIOMMU *iommu);
> diff --git a/target/s390x/ioinst.c b/target/s390x/ioinst.c
> index d5e6b8066b..a552f53167 100644
> --- a/target/s390x/ioinst.c
> +++ b/target/s390x/ioinst.c
> @@ -599,6 +599,24 @@ static int chsc_sei_nt0_have_event(void)
>      return 0;
>  }
> 
> +static int chsc_sei_nt2_get_event(void *res)
> +{
> +#ifdef CONFIG_PCI
> +    return pci_chsc_sei_nt2_get_event(res);
> +#else
> +    return 1;
> +#endif
> +}
> +
> +static int chsc_sei_nt2_have_event(void)
> +{
> +#ifdef CONFIG_PCI
> +    return pci_chsc_sei_nt2_have_event();
> +#else
> +    return 0;
> +#endif

I think this is similar to the io instructions. We should use the CPU
model to decide what to return. This will then cover the 3 cases
- CONFIG_PCI off
- CONFIG_PCI on, but PCI disabled via cpu model
- CONFIG_PCI on, and PCI enabled via cpu model

no?


> +}
> +
>  #define CHSC_SEI_NT0    (1ULL << 63)
>  #define CHSC_SEI_NT2    (1ULL << 61)
>  static void ioinst_handle_chsc_sei(ChscReq *req, ChscResp *res)
>

On Fri, 7 Jul 2017 15:01:59 +0200
Christian Borntraeger <borntraeger@de.ibm.com> wrote:

> On 07/07/2017 02:21 PM, Cornelia Huck wrote:
> > The nt2 event class is pci-only and therefore implemented in
> > the s390x pci code. Properly stub it out for non-pci builds.
> > 
> > Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> > ---
> >  hw/s390x/s390-pci-bus.c |  4 ++--
> >  hw/s390x/s390-pci-bus.h |  4 ++--
> >  target/s390x/ioinst.c   | 18 ++++++++++++++++++
> >  3 files changed, 22 insertions(+), 4 deletions(-)
> > 
> > diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
> > index 5651483781..eee9a04eac 100644
> > --- a/hw/s390x/s390-pci-bus.c
> > +++ b/hw/s390x/s390-pci-bus.c
> > @@ -47,7 +47,7 @@ S390pciState *s390_get_phb(void)
> >      return phb;
> >  }
> > 
> > -int chsc_sei_nt2_get_event(void *res)
> > +int pci_chsc_sei_nt2_get_event(void *res)
> >  {
> >      ChscSeiNt2Res *nt2_res = (ChscSeiNt2Res *)res;
> >      PciCcdfAvail *accdf;
> > @@ -87,7 +87,7 @@ int chsc_sei_nt2_get_event(void *res)
> >      return rc;
> >  }
> > 
> > -int chsc_sei_nt2_have_event(void)
> > +int pci_chsc_sei_nt2_have_event(void)
> >  {
> >      S390pciState *s = s390_get_phb();
> > 
> > diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
> > index cf142a3e68..29d3da10f6 100644
> > --- a/hw/s390x/s390-pci-bus.h
> > +++ b/hw/s390x/s390-pci-bus.h
> > @@ -318,8 +318,8 @@ typedef struct S390pciState {
> >  } S390pciState;
> > 
> >  S390pciState *s390_get_phb(void);
> > -int chsc_sei_nt2_get_event(void *res);
> > -int chsc_sei_nt2_have_event(void);
> > +int pci_chsc_sei_nt2_get_event(void *res);
> > +int pci_chsc_sei_nt2_have_event(void);
> >  void s390_pci_sclp_configure(SCCB *sccb);
> >  void s390_pci_sclp_deconfigure(SCCB *sccb);
> >  void s390_pci_iommu_enable(S390PCIIOMMU *iommu);
> > diff --git a/target/s390x/ioinst.c b/target/s390x/ioinst.c
> > index d5e6b8066b..a552f53167 100644
> > --- a/target/s390x/ioinst.c
> > +++ b/target/s390x/ioinst.c
> > @@ -599,6 +599,24 @@ static int chsc_sei_nt0_have_event(void)
> >      return 0;
> >  }
> > 
> > +static int chsc_sei_nt2_get_event(void *res)
> > +{
> > +#ifdef CONFIG_PCI
> > +    return pci_chsc_sei_nt2_get_event(res);
> > +#else
> > +    return 1;
> > +#endif
> > +}
> > +
> > +static int chsc_sei_nt2_have_event(void)
> > +{
> > +#ifdef CONFIG_PCI
> > +    return pci_chsc_sei_nt2_have_event();
> > +#else
> > +    return 0;
> > +#endif  
> 
> I think this is similar to the io instructions. We should use the CPU
> model to decide what to return. This will then cover the 3 cases
> - CONFIG_PCI off
> - CONFIG_PCI on, but PCI disabled via cpu model
> - CONFIG_PCI on, and PCI enabled via cpu model
> 
> no?

Using the cpu model sounds good, but I think we'll really need a stub
file for non-pci...