[v3,6/6] pwm: mediatek: add MT2712/MT7622 support

Message ID 1498802721-32455-7-git-send-email-zhi.mao@mediatek.com
State Changes Requested
Headers show

Commit Message

Zhi Mao June 30, 2017, 6:05 a.m.
1. support multiple chip(MT2712, MT7622, MT7623)
2. add mtk_pwm_com_reg for match the registers of MT2712 pwm8
   the register offset address of pwm8 for MT2712 is not fixed 0x40
   and they are not the same as pwm0~6.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |   55 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 11 deletions(-)

Comments

Thierry Reding Aug. 21, 2017, 8:05 a.m. | #1
On Fri, Jun 30, 2017 at 02:05:21PM +0800, Zhi Mao wrote:
> 1. support multiple chip(MT2712, MT7622, MT7623)
> 2. add mtk_pwm_com_reg for match the registers of MT2712 pwm8
>    the register offset address of pwm8 for MT2712 is not fixed 0x40
>    and they are not the same as pwm0~6.
> 
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> ---
>  drivers/pwm/pwm-mediatek.c |   55 +++++++++++++++++++++++++++++++++++---------
>  1 file changed, 44 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> index 1d78ab1..2c9ce24 100644
> --- a/drivers/pwm/pwm-mediatek.c
> +++ b/drivers/pwm/pwm-mediatek.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/clk.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/pwm.h>
>  #include <linux/slab.h>
> @@ -40,11 +41,19 @@ enum {
>  	MTK_CLK_PWM3,
>  	MTK_CLK_PWM4,
>  	MTK_CLK_PWM5,
> +	MTK_CLK_PWM6,
> +	MTK_CLK_PWM7,
> +	MTK_CLK_PWM8,
>  	MTK_CLK_MAX,
>  };
>  
> -static const char * const mtk_pwm_clk_name[] = {
> -	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
> +static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
> +	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4",
> +	"pwm5", "pwm6", "pwm7", "pwm8"

You're wrapping these lines at arbitrary boundaries. Make sure to use
all of the 80 columns at your disposal.

> +};
> +
> +struct mtk_com_pwm_data {

What does the _com stand for in the above?

> +	unsigned int pwm_nums;
>  };

Maybe name this num_pwms for consistency with other drivers?

>  
>  /**
> @@ -57,6 +66,11 @@ struct mtk_pwm_chip {
>  	struct pwm_chip chip;
>  	void __iomem *regs;
>  	struct clk *clks[MTK_CLK_MAX];
> +	const struct mtk_com_pwm_data *data;
> +};
> +
> +static const unsigned long mtk_pwm_com_reg[] = {

There's another of these _com that I don't understand what it means.
Also since these are all fairly small offsets, these can simply be
unsigned int.

> +	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
>  };
>  
>  static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
> @@ -103,14 +117,14 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
>  static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
>  				unsigned int offset)
>  {
> -	return readl(chip->regs + 0x10 + (num * 0x40) + offset);
> +	return readl(chip->regs + mtk_pwm_com_reg[num] + offset);
>  }
>  
>  static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
>  				  unsigned int num, unsigned int offset,
>  				  u32 value)
>  {
> -	writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
> +	writel(value, chip->regs + mtk_pwm_com_reg[num] + offset);
>  }
>  
>  static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> @@ -194,23 +208,28 @@ static int mtk_pwm_probe(struct platform_device *pdev)
>  	if (!pc)
>  		return -ENOMEM;
>  
> +	pc->data = of_device_get_match_data(&pdev->dev);
> +
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	pc->regs = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(pc->regs))
>  		return PTR_ERR(pc->regs);
>  
> -	for (i = 0; i < MTK_CLK_MAX; i++) {
> +	for (i = 0; i < pc->data->pwm_nums + 2; i++) {
>  		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
> -		if (IS_ERR(pc->clks[i]))
> +		if (IS_ERR(pc->clks[i])) {
> +			dev_err(&pdev->dev, "[PWM] clock: %s fail: %ld\n",
> +				mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));

Why include the "[PWM] " prefix in the above message?

>  			return PTR_ERR(pc->clks[i]);
> +		}
>  	}
>  
> -	platform_set_drvdata(pdev, pc);
> -
>  	pc->chip.dev = &pdev->dev;
>  	pc->chip.ops = &mtk_pwm_ops;
>  	pc->chip.base = -1;
> -	pc->chip.npwm = 5;
> +	pc->chip.npwm = pc->data->pwm_nums;
> +
> +	platform_set_drvdata(pdev, pc);

No need to move the location of the platform_set_drvdata() call. It's
needless churn.

>  static const struct of_device_id mtk_pwm_of_match[] = {
> -	{ .compatible = "mediatek,mt7623-pwm" },
> -	{ }
> +	{.compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data},
> +	{.compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data},
> +	{.compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data},
> +	{},

Spaces after { and before }, please.

Thierry
Zhi Mao Aug. 21, 2017, 9:05 a.m. | #2
Hi Thierry,

Thanks for your review  code.
I will modify the code as you comment in the next release.

Regards
Zhi

On Mon, 2017-08-21 at 10:05 +0200, Thierry Reding wrote:
> On Fri, Jun 30, 2017 at 02:05:21PM +0800, Zhi Mao wrote:
> > 1. support multiple chip(MT2712, MT7622, MT7623)
> > 2. add mtk_pwm_com_reg for match the registers of MT2712 pwm8
> >    the register offset address of pwm8 for MT2712 is not fixed 0x40
> >    and they are not the same as pwm0~6.
> > 
> > Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> > ---
> >  drivers/pwm/pwm-mediatek.c |   55 +++++++++++++++++++++++++++++++++++---------
> >  1 file changed, 44 insertions(+), 11 deletions(-)
> > 
> > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > index 1d78ab1..2c9ce24 100644
> > --- a/drivers/pwm/pwm-mediatek.c
> > +++ b/drivers/pwm/pwm-mediatek.c
> > @@ -16,6 +16,7 @@
> >  #include <linux/module.h>
> >  #include <linux/clk.h>
> >  #include <linux/of.h>
> > +#include <linux/of_device.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/pwm.h>
> >  #include <linux/slab.h>
> > @@ -40,11 +41,19 @@ enum {
> >  	MTK_CLK_PWM3,
> >  	MTK_CLK_PWM4,
> >  	MTK_CLK_PWM5,
> > +	MTK_CLK_PWM6,
> > +	MTK_CLK_PWM7,
> > +	MTK_CLK_PWM8,
> >  	MTK_CLK_MAX,
> >  };
> >  
> > -static const char * const mtk_pwm_clk_name[] = {
> > -	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
> > +static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
> > +	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4",
> > +	"pwm5", "pwm6", "pwm7", "pwm8"
> 
> You're wrapping these lines at arbitrary boundaries. Make sure to use
> all of the 80 columns at your disposal.
> 
> > +};
> > +
> > +struct mtk_com_pwm_data {
> 
> What does the _com stand for in the above?
> 
> > +	unsigned int pwm_nums;
> >  };
> 
> Maybe name this num_pwms for consistency with other drivers?
> 
> >  
> >  /**
> > @@ -57,6 +66,11 @@ struct mtk_pwm_chip {
> >  	struct pwm_chip chip;
> >  	void __iomem *regs;
> >  	struct clk *clks[MTK_CLK_MAX];
> > +	const struct mtk_com_pwm_data *data;
> > +};
> > +
> > +static const unsigned long mtk_pwm_com_reg[] = {
> 
> There's another of these _com that I don't understand what it means.
> Also since these are all fairly small offsets, these can simply be
> unsigned int.
> 
> > +	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
> >  };
> >  
> >  static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
> > @@ -103,14 +117,14 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> >  static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
> >  				unsigned int offset)
> >  {
> > -	return readl(chip->regs + 0x10 + (num * 0x40) + offset);
> > +	return readl(chip->regs + mtk_pwm_com_reg[num] + offset);
> >  }
> >  
> >  static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
> >  				  unsigned int num, unsigned int offset,
> >  				  u32 value)
> >  {
> > -	writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
> > +	writel(value, chip->regs + mtk_pwm_com_reg[num] + offset);
> >  }
> >  
> >  static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> > @@ -194,23 +208,28 @@ static int mtk_pwm_probe(struct platform_device *pdev)
> >  	if (!pc)
> >  		return -ENOMEM;
> >  
> > +	pc->data = of_device_get_match_data(&pdev->dev);
> > +
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	pc->regs = devm_ioremap_resource(&pdev->dev, res);
> >  	if (IS_ERR(pc->regs))
> >  		return PTR_ERR(pc->regs);
> >  
> > -	for (i = 0; i < MTK_CLK_MAX; i++) {
> > +	for (i = 0; i < pc->data->pwm_nums + 2; i++) {
> >  		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
> > -		if (IS_ERR(pc->clks[i]))
> > +		if (IS_ERR(pc->clks[i])) {
> > +			dev_err(&pdev->dev, "[PWM] clock: %s fail: %ld\n",
> > +				mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
> 
> Why include the "[PWM] " prefix in the above message?
> 
> >  			return PTR_ERR(pc->clks[i]);
> > +		}
> >  	}
> >  
> > -	platform_set_drvdata(pdev, pc);
> > -
> >  	pc->chip.dev = &pdev->dev;
> >  	pc->chip.ops = &mtk_pwm_ops;
> >  	pc->chip.base = -1;
> > -	pc->chip.npwm = 5;
> > +	pc->chip.npwm = pc->data->pwm_nums;
> > +
> > +	platform_set_drvdata(pdev, pc);
> 
> No need to move the location of the platform_set_drvdata() call. It's
> needless churn.
> 
> >  static const struct of_device_id mtk_pwm_of_match[] = {
> > -	{ .compatible = "mediatek,mt7623-pwm" },
> > -	{ }
> > +	{.compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data},
> > +	{.compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data},
> > +	{.compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data},
> > +	{},
> 
> Spaces after { and before }, please.
> 
> Thierry


--
To unsubscribe from this list: send the line "unsubscribe linux-pwm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 1d78ab1..2c9ce24 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -16,6 +16,7 @@ 
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
@@ -40,11 +41,19 @@  enum {
 	MTK_CLK_PWM3,
 	MTK_CLK_PWM4,
 	MTK_CLK_PWM5,
+	MTK_CLK_PWM6,
+	MTK_CLK_PWM7,
+	MTK_CLK_PWM8,
 	MTK_CLK_MAX,
 };
 
-static const char * const mtk_pwm_clk_name[] = {
-	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
+static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
+	"main", "top", "pwm1", "pwm2", "pwm3", "pwm4",
+	"pwm5", "pwm6", "pwm7", "pwm8"
+};
+
+struct mtk_com_pwm_data {
+	unsigned int pwm_nums;
 };
 
 /**
@@ -57,6 +66,11 @@  struct mtk_pwm_chip {
 	struct pwm_chip chip;
 	void __iomem *regs;
 	struct clk *clks[MTK_CLK_MAX];
+	const struct mtk_com_pwm_data *data;
+};
+
+static const unsigned long mtk_pwm_com_reg[] = {
+	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
 };
 
 static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
@@ -103,14 +117,14 @@  static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
 				unsigned int offset)
 {
-	return readl(chip->regs + 0x10 + (num * 0x40) + offset);
+	return readl(chip->regs + mtk_pwm_com_reg[num] + offset);
 }
 
 static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
 				  unsigned int num, unsigned int offset,
 				  u32 value)
 {
-	writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
+	writel(value, chip->regs + mtk_pwm_com_reg[num] + offset);
 }
 
 static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -194,23 +208,28 @@  static int mtk_pwm_probe(struct platform_device *pdev)
 	if (!pc)
 		return -ENOMEM;
 
+	pc->data = of_device_get_match_data(&pdev->dev);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pc->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(pc->regs))
 		return PTR_ERR(pc->regs);
 
-	for (i = 0; i < MTK_CLK_MAX; i++) {
+	for (i = 0; i < pc->data->pwm_nums + 2; i++) {
 		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
-		if (IS_ERR(pc->clks[i]))
+		if (IS_ERR(pc->clks[i])) {
+			dev_err(&pdev->dev, "[PWM] clock: %s fail: %ld\n",
+				mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
 			return PTR_ERR(pc->clks[i]);
+		}
 	}
 
-	platform_set_drvdata(pdev, pc);
-
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &mtk_pwm_ops;
 	pc->chip.base = -1;
-	pc->chip.npwm = 5;
+	pc->chip.npwm = pc->data->pwm_nums;
+
+	platform_set_drvdata(pdev, pc);
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
@@ -228,9 +247,23 @@  static int mtk_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
+static const struct mtk_com_pwm_data mt2712_pwm_data = {
+	.pwm_nums = 8,
+};
+
+static const struct mtk_com_pwm_data mt7622_pwm_data = {
+	.pwm_nums = 6,
+};
+
+static const struct mtk_com_pwm_data mt7623_pwm_data = {
+	.pwm_nums = 5,
+};
+
 static const struct of_device_id mtk_pwm_of_match[] = {
-	{ .compatible = "mediatek,mt7623-pwm" },
-	{ }
+	{.compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data},
+	{.compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data},
+	{.compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data},
+	{},
 };
 MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);