[2/2,v3] pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is against the recent Linus' tree plus the patches queued by
Jeff Garzik in his 'upstream-linus' branch.

Changes from the previous version:
- moved change in hpt_dma_blacklisted() of the 'pata_hpt37x' driver to patch 1.

 drivers/ata/pata_hpt37x.c  |   22 +++++++++++-----------
 drivers/ata/pata_hpt3x2n.c |   12 +++++-------
 2 files changed, 16 insertions(+), 18 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

On 01/10/2011 01:39 PM, Sergei Shtylyov wrote:
> ... the same as the 'pata_hpt366' driver does.
>
> Signed-off-by: Sergei Shtylyov<sshtylyov@ru.mvista.com>
>
> ---
> The patch is against the recent Linus' tree plus the patches queued by
> Jeff Garzik in his 'upstream-linus' branch.
>
> Changes from the previous version:
> - moved change in hpt_dma_blacklisted() of the 'pata_hpt37x' driver to patch 1.
>
>   drivers/ata/pata_hpt37x.c  |   22 +++++++++++-----------
>   drivers/ata/pata_hpt3x2n.c |   12 +++++-------
>   2 files changed, 16 insertions(+), 18 deletions(-)
>
> Index: linux-2.6/drivers/ata/pata_hpt37x.c
> ===================================================================
> --- linux-2.6.orig/drivers/ata/pata_hpt37x.c
> +++ linux-2.6/drivers/ata/pata_hpt37x.c
> @@ -24,7 +24,7 @@
>   #include<linux/libata.h>
>
>   #define DRV_NAME	"pata_hpt37x"
> -#define DRV_VERSION	"0.6.19"
> +#define DRV_VERSION	"0.6.20"
>
>   struct hpt_clock {
>   	u8	xfer_speed;
> @@ -863,7 +863,7 @@ static int hpt37x_init_one(struct pci_de
>   			chip_table =&hpt372;
>   			break;
>   		default:
> -			printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
> +			pr_err(DRV_NAME ": Unknown HPT366 subtype, "
>   			       "please report (%d).\n", rev);
>   			return -ENODEV;
>   		}
> @@ -906,8 +906,8 @@ static int hpt37x_init_one(struct pci_de
>   				*ppi =&info_hpt374_fn1;
>   			break;
>   		default:
> -			printk(KERN_ERR
> -			       "pata_hpt37x: PCI table is bogus, please report (%d).\n",
> +			pr_err(DRV_NAME
> +			       ": PCI table is bogus, please report (%d).\n",
>   			       dev->device);
>   				return -ENODEV;
>   		}
> @@ -957,8 +957,7 @@ static int hpt37x_init_one(struct pci_de
>   		u8 sr;
>   		u32 total = 0;
>
> -		printk(KERN_WARNING
> -		       "pata_hpt37x: BIOS has not set timing clocks.\n");
> +		pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
>
>   		/* This is the process the HPT371 BIOS is reported to use */
>   		for (i = 0; i<  128; i++) {
> @@ -1014,7 +1013,7 @@ static int hpt37x_init_one(struct pci_de
>   					       (f_high<<  16) | f_low | 0x100);
>   		}
>   		if (adjust == 8) {
> -			printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
> +			pr_err(DRV_NAME ": DPLL did not stabilize!\n");
>   			return -ENODEV;
>   		}
>   		if (dpll == 3)
> @@ -1022,8 +1021,8 @@ static int hpt37x_init_one(struct pci_de
>   		else
>   			private_data = (void *)hpt37x_timings_50;
>
> -		printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
> -		       MHz[clock_slot], MHz[dpll]);
> +		pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
> +			MHz[clock_slot], MHz[dpll]);
>   	} else {
>   		private_data = (void *)chip_table->clocks[clock_slot];
>   		/*
> @@ -1036,8 +1035,9 @@ static int hpt37x_init_one(struct pci_de
>   			ppi[0] =&info_hpt370_33;
>   		if (clock_slot<  2&&  ppi[0] ==&info_hpt370a)
>   			ppi[0] =&info_hpt370a_33;
> -		printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
> -		       chip_table->name, MHz[clock_slot]);
> +
> +		pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
> +			chip_table->name, MHz[clock_slot]);

ditto.  when the pci_dev ptr is available, you may use dev_printk.

These days, you want to look for a printk helper that takes a pointer to 
a domain-specific object (struct device or struct ata_device etc.).

	Jeff



--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html