[U-Boot] ppc4xx: Add DLVision-10G board support

Board support for the Guntermann & Drunck DLVision-10G.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
---
 MAINTAINERS                            |    1 +
 arch/powerpc/include/asm/global_data.h |    3 +
 board/gdsys/405ep/405ep.c              |   38 +++++-
 board/gdsys/405ep/Makefile             |    1 +
 board/gdsys/405ep/dlvision-10g.c       |  126 +++++++++++++++++
 board/gdsys/common/fpga.h              |    8 +
 boards.cfg                             |    1 +
 include/configs/dlvision-10g.h         |  242 ++++++++++++++++++++++++++++++++
 8 files changed, 417 insertions(+), 3 deletions(-)
 create mode 100644 board/gdsys/405ep/dlvision-10g.c
 create mode 100644 include/configs/dlvision-10g.h

Hi Dirk,

On Monday 10 January 2011 13:33:23 Dirk Eibach wrote:
> Board support for the Guntermann & Drunck DLVision-10G.

A few comments below...
 
> Signed-off-by: Dirk Eibach <eibach@gdsys.de>
> ---
>  MAINTAINERS                            |    1 +
>  arch/powerpc/include/asm/global_data.h |    3 +
>  board/gdsys/405ep/405ep.c              |   38 +++++-
>  board/gdsys/405ep/Makefile             |    1 +
>  board/gdsys/405ep/dlvision-10g.c       |  126 +++++++++++++++++
>  board/gdsys/common/fpga.h              |    8 +
>  boards.cfg                             |    1 +
>  include/configs/dlvision-10g.h         |  242
> ++++++++++++++++++++++++++++++++ 8 files changed, 417 insertions(+), 3
> deletions(-)
>  create mode 100644 board/gdsys/405ep/dlvision-10g.c
>  create mode 100644 include/configs/dlvision-10g.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ba83f71..a13812a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -142,6 +142,7 @@ Dirk Eibach <eibach@gdsys.de>
> 
>  	devconcenter	PPC460EX
>  	dlvision        PPC405EP
> +	dlvision-10g	PPC405EP
>  	gdppc440etx	PPC440EP/GR
>  	intip		PPC460EX
>  	io		PPC405EP
> diff --git a/arch/powerpc/include/asm/global_data.h
> b/arch/powerpc/include/asm/global_data.h index 2e218de..4068e85 100644
> --- a/arch/powerpc/include/asm/global_data.h
> +++ b/arch/powerpc/include/asm/global_data.h
> @@ -172,6 +172,9 @@ typedef	struct	global_data {
>  #if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
>  	unsigned long kbd_status;
>  #endif
> +#ifdef CONFIG_405EP
> +	unsigned fpga_state;
> +#endif

"fpga_state" doesn't seem to be 405EP specific.

>  #if defined(CONFIG_WD_MAX_RATE)
>  	unsigned long long wdt_last;	/* trace watch-dog triggering rate */
>  #endif
> diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
> index d3bd233..c2d9455 100644
> --- a/board/gdsys/405ep/405ep.c
> +++ b/board/gdsys/405ep/405ep.c
> @@ -26,6 +26,7 @@
>  #include <asm/processor.h>
>  #include <asm/io.h>
>  #include <asm/ppc4xx-gpio.h>
> +#include <asm/global_data.h>
> 
>  #include "../common/fpga.h"
> 
> @@ -36,8 +37,27 @@
>  #define REFLECTION_TESTPATTERN 0xdede
>  #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
> 
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int get_fpga_state(void)
> +{
> +	return gd->fpga_state;
> +}
> +
> +void print_fpga_state(void)
> +{
> +	if (gd->fpga_state & FPGA_STATE_DONE_FAILED)
> +		puts("       Waiting for FPGA-DONE timed out.\n");
> +	if (gd->fpga_state & FPGA_STATE_REFLECTION_FAILED)
> +		puts("       FPGA reflection test failed.\n");
> +}
> +
>  int board_early_init_f(void)
>  {
> +	unsigned ctr;
> +
> +	gd->fpga_state = 0;
> +
>  	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
>  	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
>  	mtdcr(UIC0CR, 0x00000000);	/* set all to be non-critical */
> @@ -66,10 +86,16 @@ int board_early_init_f(void)
> 
>  	/*
>  	 * wait for fpga-done
> -	 * fail ungraceful if fpga is not configuring properly
>  	 */
> -	while (!(in_le16((void *)LATCH2_BASE) & 0x0010))
> -		;
> +#warning this will not work for dlvision-10g

Hmmm. Can't you handle this better? Remove this code for the dlvision-10g?

> +	ctr = 0;
> +	while (!(in_le16((void *)LATCH2_BASE) & 0x0010)) {
> +		udelay(100000);
> +		if (ctr++ > 5) {
> +			gd->fpga_state |= FPGA_STATE_DONE_FAILED;
> +			break;
> +		}
> +	}
> 
>  	/*
>  	 * setup io-latches for boot (stop reset)
> @@ -82,11 +108,17 @@ int board_early_init_f(void)
>  	 * wait for fpga out of reset
>  	 * fail ungraceful if fpga is not working properly
>  	 */
> +	ctr = 0;
>  	while (1) {
>  		fpga_set_reg(CONFIG_SYS_FPGA_RFL_LOW, REFLECTION_TESTPATTERN);
>  		if (fpga_get_reg(CONFIG_SYS_FPGA_RFL_HIGH) ==
>  			REFLECTION_TESTPATTERN_INV)
>  			break;
> +		udelay(100000);
> +		if (ctr++ > 5) {
> +			gd->fpga_state |= FPGA_STATE_REFLECTION_FAILED;
> +			break;
> +		}
>  	}
> 
>  	return 0;
> diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
> index ed31207..169418c 100644
> --- a/board/gdsys/405ep/Makefile
> +++ b/board/gdsys/405ep/Makefile
> @@ -27,6 +27,7 @@ LIB	= $(obj)lib$(BOARD).o
> 
>  COBJS-$(CONFIG_IO) += io.o
>  COBJS-$(CONFIG_IOCON) += iocon.o
> +COBJS-$(CONFIG_DLVISION_10G) += dlvision-10g.o
> 
>  COBJS   := $(BOARD).o $(COBJS-y)
>  SOBJS   =
> diff --git a/board/gdsys/405ep/dlvision-10g.c
> b/board/gdsys/405ep/dlvision-10g.c new file mode 100644
> index 0000000..e704f74
> --- /dev/null
> +++ b/board/gdsys/405ep/dlvision-10g.c
> @@ -0,0 +1,126 @@
> +/*
> + * (C) Copyright 2010
> + * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <asm/processor.h>
> +#include <asm/io.h>
> +#include <asm/ppc4xx-gpio.h>
> +
> +#include "../common/fpga.h"
> +
> +enum {
> +	REG_VERSIONS = 0x0002,
> +	REG_FPGA_FEATURES = 0x0004,
> +	REG_FPGA_VERSION = 0x0006,
> +};
> +
> +enum {
> +	UNITTYPE_CCD_SWITCH = 1,
> +};
> +
> +enum {
> +	HWVER_100 = 0,
> +	HWVER_110 = 1,
> +	HWVER_121 = 2,
> +	HWVER_122 = 3,
> +};
> +
> +/*
> + * Check Board Identity:
> + */
> +int checkboard(void)
> +{
> +	char *s = getenv("serial#");
> +	u16 versions = fpga_get_reg(REG_VERSIONS);
> +	u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION);
> +	u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES);
> +	unsigned unit_type;
> +	unsigned hardware_version;
> +	unsigned feature_channels;
> +	unsigned feature_expansion;
> +	int fpga_state = get_fpga_state();
> +
> +	unit_type = (versions & 0xf000) >> 12;
> +	hardware_version = versions & 0x000f;
> +	feature_channels = fpga_features & 0x007f;
> +	feature_expansion = fpga_features & (1<<15);
> +
> +	printf("Board: ");
> +
> +	printf("DLVision 10G");
> +
> +	if (s != NULL) {
> +		puts(", serial# ");
> +		puts(s);
> +	}
> +
> +	if (fpga_state) {
> +		puts("\nFPGA:  not available\n");
> +		print_fpga_state();
> +		return 0;
> +	} else
> +		puts("\n       ");
> +#if 0

Please don't add dead code.

> +	switch (unit_type) {
> +	case UNITTYPE_CCD_SWITCH:
> +		printf("CCD-Switch");
> +		break;
> +
> +	default:
> +		printf("UnitType %d(not supported)", unit_type);
> +		break;
> +	}
> +
> +	switch (hardware_version) {
> +	case HWVER_100:
> +		printf(" HW-Ver 1.00\n");
> +		break;
> +
> +	case HWVER_110:
> +		printf(" HW-Ver 1.10\n");
> +		break;
> +
> +	case HWVER_121:
> +		printf(" HW-Ver 1.21\n");
> +		break;
> +
> +	case HWVER_122:
> +		printf(" HW-Ver 1.22\n");
> +		break;
> +
> +	default:
> +		printf(" HW-Ver %d(not supported)\n",
> +		       hardware_version);
> +		break;
> +	}
> +
> +	printf("       FPGA V %d.%02d, features:",
> +		fpga_version / 100, fpga_version % 100);
> +
> +	printf(" %d channel(s)", feature_channels);
> +
> +	printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
> +#endif
> +	return 0;
> +}
> diff --git a/board/gdsys/common/fpga.h b/board/gdsys/common/fpga.h
> index c1434e7..561a29f 100644
> --- a/board/gdsys/common/fpga.h
> +++ b/board/gdsys/common/fpga.h
> @@ -24,6 +24,14 @@
>  #ifndef _FPGA_H_
>  #define _FPGA_H_
> 
> +enum {
> +	FPGA_STATE_DONE_FAILED = 1 << 0,
> +	FPGA_STATE_REFLECTION_FAILED = 1 << 1,
> +};
> +
> +int get_fpga_state(void);
> +void print_fpga_state(void);
> +
>  static inline u16 fpga_get_reg(unsigned reg)
>  {
>  	return in_le16((void *)(CONFIG_SYS_FPGA_BASE + reg));
> diff --git a/boards.cfg b/boards.cfg
> index 94b8745..4cdecf3 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -719,6 +719,7 @@ VOM405                       powerpc     ppc4xx     
> vom405              esd WUH405                       powerpc     ppc4xx   
>   wuh405              esd devconcenter                 powerpc     ppc4xx 
>     intip               gdsys          -           intip:DEVCONCENTER
> dlvision                     powerpc     ppc4xx      -                  
> gdsys +dlvision-10g                 powerpc     ppc4xx      405ep         
>      gdsys gdppc440etx                  powerpc     ppc4xx      -         
>          gdsys intip                        powerpc     ppc4xx      intip 
>              gdsys          -           intip:INTIB io                    
>       powerpc     ppc4xx      405ep               gdsys diff --git
> a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h new file
> mode 100644
> index 0000000..dafee1f
> --- /dev/null
> +++ b/include/configs/dlvision-10g.h
> @@ -0,0 +1,242 @@
> +/*
> + * (C) Copyright 2010
> + * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_405EP		1	/* this is a PPC405 CPU */
> +#define CONFIG_4xx		1	/*  member of PPC4xx family */
> +#define CONFIG_DLVISION_10G	1	/*  on a DLVision-10G board */
> +
> +#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
> +
> +/*
> + * Include common defines/options for all AMCC eval boards
> + */
> +#define CONFIG_HOSTNAME		dlvsion-10g
> +#define CONFIG_IDENT_STRING	" dlvision-10g 0.01"
> +#include "amcc-common.h"
> +
> +#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f */
> +
> +#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */
> +
> +/*
> + * Configure PLL
> + */
> +#define PLLMR0_DEFAULT PLLMR0_266_133_66
> +#define PLLMR1_DEFAULT PLLMR1_266_133_66
> +
> +/* new uImage format support */
> +#define CONFIG_FIT
> +#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
> +
> +#define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
> +
> +/*
> + * Default environment variables
> + */
> +#define	CONFIG_EXTRA_ENV_SETTINGS					
\
> +	CONFIG_AMCC_DEF_ENV						\
> +	CONFIG_AMCC_DEF_ENV_POWERPC					\
> +	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
> +	"kernel_addr=fc000000\0"					\
> +	"fdt_addr=fc1e0000\0"						\
> +	"ramdisk_addr=fc200000\0"					\
> +	""
> +
> +#define CONFIG_PHY_ADDR		4	/* PHY address			
*/
> +#define CONFIG_HAS_ETH0
> +#define CONFIG_HAS_ETH1
> +#define CONFIG_PHY1_ADDR	0xc	/* EMAC1 PHY address		*/
> +#define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ
> +
> +/*
> + * Commands additional to the ones defined in amcc-common.h
> + */
> +#define CONFIG_CMD_CACHE
> +#undef CONFIG_CMD_EEPROM
> +
> +/*
> + * SDRAM configuration (please see cpu/ppc/sdram.[ch])
> + */
> +#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
> +
> +/* SDRAM timings used in datasheet */
> +#define CONFIG_SYS_SDRAM_CL             3	/* CAS latency */
> +#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
> +#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE period */
> +#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
> +#define CONFIG_SYS_SDRAM_tRFC          66	/* Auto refresh period */
> +
> +/*
> + * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
> + * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
> + * Otherwise, UART divisor is determined by CPU Clock and
> CONFIG_SYS_BASE_BAUD. + * The Linux BASE_BAUD define should match this
> configuration.
> + *    baseBaud = cpuClock/(uartDivisor*16)
> + * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
> + * set Linux BASE_BAUD to 403200.
> + */
> +#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
> +#undef  CONFIG_SYS_EXT_SERIAL_CLOCK	/* external serial clock */
> +#undef  CONFIG_SYS_405_UART_ERRATA_59	/* 405GP/CR Rev. D silicon */
> +#define CONFIG_SYS_BASE_BAUD		691200
> +
> +/*
> + * I2C stuff
> + */
> +#define CONFIG_SYS_I2C_SPEED		100000
> +
> +/* Temp sensor/hwmon/dtt */
> +#define CONFIG_DTT_LM63		1	/* National LM63	*/
> +#define CONFIG_DTT_SENSORS	{ 0 }	/* Sensor addresses	*/
> +#define CONFIG_DTT_PWM_LOOKUPTABLE	\
> +		{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
> +#define CONFIG_DTT_TACH_LIMIT	0xa10
> +
> +/*
> + * FLASH organization
> + */
> +#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
> +#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	
*/
> +
> +#define CONFIG_SYS_FLASH_BASE		0xFC000000
> +#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
> +
> +#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
> +#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors per 
chip*/
> +
> +#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms
> */ +#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash 
Write/ms
> */ +
> +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buff'd writes */
> +#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protect 
*/
> +
> +#define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
> +#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* no warn upon unknown flash 
*/
> +
> +#ifdef CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector */
> +#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-
CONFIG_ENV_SECT_SIZE)
> +#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment 
Sector */
> +
> +/* Address and size of Redundant Environment Sector	*/
> +#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)

Space around "-".

> +#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
> +#endif
> +
> +/*
> + * PPC405 GPIO Configuration
> + */
> +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO	Alternate1	*/ \
> +{ \
> +/* GPIO Core 0 */ \
> +{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0	
PerBLast */
> \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1	TS1E 
*/ \
> +{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2	TS2E 
*/ \
> +{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3	TS1O 
*/ \
> +{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4	TS2O 
*/ \
> +{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5	TS3 */ 
\ +{
> GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6	TS4 */ \ +{
> GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO7	TS5 */ \ +{
> GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8	TS6 */ \ +{
> GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9	TrcClk */ \ +{
> GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10	PerCS1 */ \
> +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11	PerCS2 
*/
> \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12	PerCS3
> */ \ +{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /*
> GPIO13	PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG 
},
> /* GPIO14	PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1,
> GPIO_OUT_NO_CHG }, /* GPIO15	PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT,
> GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16	PerAddr05 */ \ +{ GPIO_BASE,
> GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17	IRQ0 */ \ +{ 
GPIO_BASE,
> GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18	IRQ1 */ \ +{ 
GPIO_BASE,
> GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19	IRQ2 */ \ +{ 
GPIO_BASE,
> GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20	IRQ3 */ \ +{ 
GPIO_BASE,
> GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21	IRQ4 */ \ +{ 
GPIO_BASE,
> GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22	IRQ5 */ \ +{ 
GPIO_BASE,
> GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23	IRQ6 */ \ +{ 
GPIO_BASE,
> GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24	UART0_DCD */ \ +{
> GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25	UART0_DSR */
> \ +{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26	
UART0_RI
> */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /*
> GPIO27	UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, 
GPIO_OUT_NO_CHG
> }, /* GPIO28	UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1,
> GPIO_OUT_NO_CHG }, /* GPIO29	UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT,
> GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30	RejectPkt0 */ \ +{ GPIO_BASE,
> GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31	RejectPkt1 */ \ +} \
> +}
> +
> +/*
> + * Definitions for initial stack pointer and data area (in data cache)
> + */
> +/* use on chip memory (OCM) for temperary stack until sdram is tested */
> +#define CONFIG_SYS_TEMP_STACK_OCM	1
> +
> +/* On Chip Memory location */
> +#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
> +#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
> +#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM 
*/
> +#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of 
used
> area */ +
> +#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init 
data*/
> +#define CONFIG_SYS_GBL_DATA_OFFSET \
> +	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
> +
> +/*
> + * External Bus Controller (EBC) Setup
> + */
> +
> +/* Memory Bank 0 (NOR-FLASH) initialization */
> +#define CONFIG_SYS_EBC_PB0AP		0xa382a880
> +/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
> +#define CONFIG_SYS_EBC_PB0CR		0xFC0DA000
> +
> +/* Memory Bank 1 (FPGA) initialization */
> +#define CONFIG_SYS_FPGA_BASE		0x7f100000
> +#define CONFIG_SYS_EBC_PB1AP		0x02825080
> +/* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
> +#define CONFIG_SYS_EBC_PB1CR		0x7f11a000

You define the base address above (CONFIG_SYS_FPGA_BASE) but don't use this 
define for the EBC_PB register define. I would also prefer that you don't 
hardcode these EBC values but use the corresponding macros. See t3corp.h for 
example:

#define CONFIG_SYS_EBC_PB0CR    
(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_BOOT_BASE_ADDR) | \
                                 EBC_BXCR_BS_16MB               |       \
                                 EBC_BXCR_BU_RW                 |       \
                                 EBC_BXCR_BW_16BIT)

Please do this for all EBC register definitions.

> +#define CONFIG_SYS_FPGA_RFL_LOW		0x0000
> +#define CONFIG_SYS_FPGA_RFL_HIGH	0x007e
> +
> +/* Memory Bank 2 (FPGA_VID) initialization */
> +#define CONFIG_SYS_FPGA_VID_BASE	0x7f200000
> +#define CONFIG_SYS_EBC_PB2AP		0x02025080
> +/* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
> +#define CONFIG_SYS_EBC_PB2CR		0x7f21a000
> +
> +/* Memory Bank 3 (Latches) initialization */
> +#define CONFIG_SYS_LATCH_BASE		0x7f300000
> +#define CONFIG_SYS_EBC_PB3AP		0xa2015480
> +/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
> +#define CONFIG_SYS_EBC_PB3CR		0x7f31a000
> +
> +#define CONFIG_SYS_LATCH0_RESET		0xffff
> +#define CONFIG_SYS_LATCH0_BOOT		0xffff
> +#define CONFIG_SYS_LATCH1_RESET		0xffcf
> +#define CONFIG_SYS_LATCH1_BOOT		0xffff
> +
> +#endif	/* __CONFIG_H */

Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de