===================================================================
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.8"
+#define DRV_VERSION "0.6.9"
struct hpt_clock {
u8 xfer_mode;
@@ -110,18 +110,23 @@ static const struct hpt_clock hpt366_25[
{ 0, 0x01208585 }
};
-static const char *bad_ata33[] = {
- "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
- "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
- "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+static const char * const bad_ata33[] = {
+ "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
+ "Maxtor 90845U3", "Maxtor 90650U2",
+ "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5",
+ "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+ "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6",
+ "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
"Maxtor 90510D4",
"Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
- "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
- "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+ "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7",
+ "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+ "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5",
+ "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
NULL
};
-static const char *bad_ata66_4[] = {
+static const char * const bad_ata66_4[] = {
"IBM-DTLA-307075",
"IBM-DTLA-307060",
"IBM-DTLA-307045",
@@ -140,12 +145,13 @@ static const char *bad_ata66_4[] = {
NULL
};
-static const char *bad_ata66_3[] = {
+static const char * const bad_ata66_3[] = {
"WDC AC310200R",
NULL
};
-static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[])
+static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
+ const char * const list[])
{
unsigned char model_num[ATA_ID_PROD_LEN + 1];
int i = 0;
@@ -154,7 +160,8 @@ static int hpt_dma_blacklisted(const str
while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
+ printk(KERN_WARNING DRV_NAME
+ ": %s is not supported for %s.\n",
modestr, list[i]);
return 1;
}
@@ -288,6 +295,7 @@ static struct ata_port_operations hpt366
static void hpt36x_init_chipset(struct pci_dev *dev)
{
u8 drive_fast;
+
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
@@ -349,16 +357,16 @@ static int hpt36x_init_one(struct pci_de
/* PCI clocking determines the ATA timing values to use */
/* info_hpt366 is safe against re-entry so we can scribble on it */
- switch((reg1 & 0x700) >> 8) {
- case 9:
- hpriv = &hpt366_40;
- break;
- case 5:
- hpriv = &hpt366_25;
- break;
- default:
- hpriv = &hpt366_33;
- break;
+ switch ((reg1 & 0x700) >> 8) {
+ case 9:
+ hpriv = &hpt366_40;
+ break;
+ case 5:
+ hpriv = &hpt366_25;
+ break;
+ default:
+ hpriv = &hpt366_33;
+ break;
}
/* Now kick off ATA set up */
return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
@@ -385,9 +393,9 @@ static const struct pci_device_id hpt36x
};
static struct pci_driver hpt36x_pci_driver = {
- .name = DRV_NAME,
+ .name = DRV_NAME,
.id_table = hpt36x,
- .probe = hpt36x_init_one,
+ .probe = hpt36x_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
Fix 2 errors and 11 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *switch* and open parenthesis; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also add new line after variable definition in hpt36x_init_chipset()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> --- The patch is against the recent Linus' tree. Changes from the previous version: - fixed one case of a line over 80 chars that checkpatch.pl didn't report. drivers/ata/pata_hpt366.c | 54 ++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 23 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html