| Message ID | 1497810189-22010-1-git-send-email-chakra@openedev.com |
|---|---|
| State | Accepted |
| Headers | show |
Chakra, All, On 2017-06-18 23:53 +0530, Chakra Divi spake thusly: > As the vendor folder friendlyarm is created, > moved board nanopi-neo also under vendor > folder. > > Signed-off-by: Chakra Divi <chakra@openedev.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> > --- > - Moved nanopi-neo under friendly arm > - Yann E. MORIN, can you please help test these Changes Next time, please use the -M option when formating your patches, so that renames (moves) are detected and a smaller diff is used: diff --git a/board/nanopi-neo/boot.cmd b/board/friendlyarm/nanopi-neo/boot.cmd similarity index 100% rename from board/nanopi-neo/boot.cmd rename to board/friendlyarm/nanopi-neo/boot.cmd diff --git a/board/nanopi-neo/genimage.cfg b/board/friendlyarm/nanopi-neo/genimage.cfg similarity index 100% rename from board/nanopi-neo/genimage.cfg rename to board/friendlyarm/nanopi-neo/genimage.cfg diff --git a/board/nanopi-neo/post-build.sh b/board/friendlyarm/nanopi-neo/post-build.sh similarity index 100% rename from board/nanopi-neo/post-build.sh rename to board/friendlyarm/nanopi-neo/post-build.sh diff --git a/board/nanopi-neo/post-image.sh b/board/friendlyarm/nanopi-neo/post-image.sh similarity index 100% rename from board/nanopi-neo/post-image.sh rename to board/friendlyarm/nanopi-neo/post-image.sh diff --git a/board/nanopi-neo/readme.txt b/board/friendlyarm/nanopi-neo/readme.txt similarity index 100% rename from board/nanopi-neo/readme.txt rename to board/friendlyarm/nanopi-neo/readme.txt diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index fbc0902e52..a22705269d 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -4,8 +4,8 @@ BR2_ARM_FPU_VFPV4=y BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo" BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh" -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/friendlyarm/nanopi-neo/post-image.sh" # Linux headers same as kernel, a 4.10 series BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y Regards, Yann E. MORIN. > board/friendlyarm/nanopi-neo/boot.cmd | 8 ++++++ > board/friendlyarm/nanopi-neo/genimage.cfg | 34 ++++++++++++++++++++++ > board/friendlyarm/nanopi-neo/post-build.sh | 12 ++++++++ > board/friendlyarm/nanopi-neo/post-image.sh | 15 ++++++++++ > board/friendlyarm/nanopi-neo/readme.txt | 42 ++++++++++++++++++++++++++++ > board/nanopi-neo/boot.cmd | 8 ------ > board/nanopi-neo/genimage.cfg | 34 ---------------------- > board/nanopi-neo/post-build.sh | 12 -------- > board/nanopi-neo/post-image.sh | 15 ---------- > board/nanopi-neo/readme.txt | 42 ---------------------------- > configs/nanopi_neo_defconfig | 4 +-- > 11 files changed, 113 insertions(+), 113 deletions(-) > create mode 100644 board/friendlyarm/nanopi-neo/boot.cmd > create mode 100644 board/friendlyarm/nanopi-neo/genimage.cfg > create mode 100755 board/friendlyarm/nanopi-neo/post-build.sh > create mode 100755 board/friendlyarm/nanopi-neo/post-image.sh > create mode 100644 board/friendlyarm/nanopi-neo/readme.txt > delete mode 100644 board/nanopi-neo/boot.cmd > delete mode 100644 board/nanopi-neo/genimage.cfg > delete mode 100755 board/nanopi-neo/post-build.sh > delete mode 100755 board/nanopi-neo/post-image.sh > delete mode 100644 board/nanopi-neo/readme.txt > > diff --git a/board/friendlyarm/nanopi-neo/boot.cmd b/board/friendlyarm/nanopi-neo/boot.cmd > new file mode 100644 > index 0000000..7874057 > --- /dev/null > +++ b/board/friendlyarm/nanopi-neo/boot.cmd > @@ -0,0 +1,8 @@ > +setenv fdt_high ffffffff > + > +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait > + > +fatload mmc 0 $kernel_addr_r zImage > +fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-neo.dtb > + > +bootz $kernel_addr_r - $fdt_addr_r > diff --git a/board/friendlyarm/nanopi-neo/genimage.cfg b/board/friendlyarm/nanopi-neo/genimage.cfg > new file mode 100644 > index 0000000..ad43d31 > --- /dev/null > +++ b/board/friendlyarm/nanopi-neo/genimage.cfg > @@ -0,0 +1,34 @@ > +image boot.vfat { > + vfat { > + files = { > + "zImage", > + "sun8i-h3-nanopi-neo.dtb", > + "boot.scr" > + } > + } > + size = 10M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition u-boot { > + in-partition-table = "no" > + image = "u-boot-sunxi-with-spl.bin" > + offset = 8192 > + size = 1040384 # 1MB - 8192 > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + size = 32M > + } > +} > diff --git a/board/friendlyarm/nanopi-neo/post-build.sh b/board/friendlyarm/nanopi-neo/post-build.sh > new file mode 100755 > index 0000000..e6791e7 > --- /dev/null > +++ b/board/friendlyarm/nanopi-neo/post-build.sh > @@ -0,0 +1,12 @@ > +#!/bin/sh > +# post-build.sh for Nanopi NEO, based on the Orange Pi PC > +# 2013, Carlo Caione <carlo.caione@gmail.com> > +# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr> > + > +BOARD_DIR="$( dirname "${0}" )" > +MKIMAGE="${HOST_DIR}/usr/bin/mkimage" > +BOOT_CMD="${BOARD_DIR}/boot.cmd" > +BOOT_CMD_H="${BINARIES_DIR}/boot.scr" > + > +# U-Boot script > +"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}" > diff --git a/board/friendlyarm/nanopi-neo/post-image.sh b/board/friendlyarm/nanopi-neo/post-image.sh > new file mode 100755 > index 0000000..740386e > --- /dev/null > +++ b/board/friendlyarm/nanopi-neo/post-image.sh > @@ -0,0 +1,15 @@ > +#!/bin/sh > +# post-image.sh for Nanopi NEO, based on the Orange Pi PC > + > +BOARD_DIR="$( dirname "${0}" )" > +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" > +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" > + > +rm -rf "${GENIMAGE_TMP}" > + > +genimage \ > + --rootpath "${TARGET_DIR}" \ > + --tmppath "${GENIMAGE_TMP}" \ > + --inputpath "${BINARIES_DIR}" \ > + --outputpath "${BINARIES_DIR}" \ > + --config "${GENIMAGE_CFG}" > diff --git a/board/friendlyarm/nanopi-neo/readme.txt b/board/friendlyarm/nanopi-neo/readme.txt > new file mode 100644 > index 0000000..539df54 > --- /dev/null > +++ b/board/friendlyarm/nanopi-neo/readme.txt > @@ -0,0 +1,42 @@ > +Intro > +===== > + > +The instructions herein are valid for the FriendlyARM NanoPi NEO, > +both the 256MiB and 512MiB versions. They should also work for the > +NanoPi NEO Air, but this is untested so far. > + > +The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: > + - quad-core Cortex-A7 @1.2GHz > + - 256 or 512MiB of DDR > + - uSDCard as only storage option > + - 3x USB 2.0 host (one socket, two on expansion pin-holes) > + - 1x USB 2.0 OTG (also used as power source) > + - 10/100 ethernet MAC > + - GPIOs, SPI, I2c... > + > +Support for the Nanopi NEO in U-Boot and Linux is very recent, so only > +core, basic features are available. > + > +Unfortunately, support for the ethernet MAC and the USB OTG are not > +yet upstream, but are being actively worked on. > + > + > +How to build > +============ > + > + $ make nanopi_neo_defconfig > + $ make > + > +Note: you will need access to the internet to download the required > +sources. > + > +You will then obtain an image ready to be written to your micro SDcard: > + > + $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M > + > +Notes: > + - replace 'sdX' with the actual device with your micro SDcard, > + - you may need to be root to do that (use 'sudo'). > + > +Insert the micro SDcard in your NanoPi NEO and power it up. The console > +is on the serial line, 115200 8N1. > diff --git a/board/nanopi-neo/boot.cmd b/board/nanopi-neo/boot.cmd > deleted file mode 100644 > index 7874057..0000000 > --- a/board/nanopi-neo/boot.cmd > +++ /dev/null > @@ -1,8 +0,0 @@ > -setenv fdt_high ffffffff > - > -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait > - > -fatload mmc 0 $kernel_addr_r zImage > -fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-neo.dtb > - > -bootz $kernel_addr_r - $fdt_addr_r > diff --git a/board/nanopi-neo/genimage.cfg b/board/nanopi-neo/genimage.cfg > deleted file mode 100644 > index ad43d31..0000000 > --- a/board/nanopi-neo/genimage.cfg > +++ /dev/null > @@ -1,34 +0,0 @@ > -image boot.vfat { > - vfat { > - files = { > - "zImage", > - "sun8i-h3-nanopi-neo.dtb", > - "boot.scr" > - } > - } > - size = 10M > -} > - > -image sdcard.img { > - hdimage { > - } > - > - partition u-boot { > - in-partition-table = "no" > - image = "u-boot-sunxi-with-spl.bin" > - offset = 8192 > - size = 1040384 # 1MB - 8192 > - } > - > - partition boot { > - partition-type = 0xC > - bootable = "true" > - image = "boot.vfat" > - } > - > - partition rootfs { > - partition-type = 0x83 > - image = "rootfs.ext4" > - size = 32M > - } > -} > diff --git a/board/nanopi-neo/post-build.sh b/board/nanopi-neo/post-build.sh > deleted file mode 100755 > index e6791e7..0000000 > --- a/board/nanopi-neo/post-build.sh > +++ /dev/null > @@ -1,12 +0,0 @@ > -#!/bin/sh > -# post-build.sh for Nanopi NEO, based on the Orange Pi PC > -# 2013, Carlo Caione <carlo.caione@gmail.com> > -# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr> > - > -BOARD_DIR="$( dirname "${0}" )" > -MKIMAGE="${HOST_DIR}/usr/bin/mkimage" > -BOOT_CMD="${BOARD_DIR}/boot.cmd" > -BOOT_CMD_H="${BINARIES_DIR}/boot.scr" > - > -# U-Boot script > -"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}" > diff --git a/board/nanopi-neo/post-image.sh b/board/nanopi-neo/post-image.sh > deleted file mode 100755 > index 740386e..0000000 > --- a/board/nanopi-neo/post-image.sh > +++ /dev/null > @@ -1,15 +0,0 @@ > -#!/bin/sh > -# post-image.sh for Nanopi NEO, based on the Orange Pi PC > - > -BOARD_DIR="$( dirname "${0}" )" > -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" > -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" > - > -rm -rf "${GENIMAGE_TMP}" > - > -genimage \ > - --rootpath "${TARGET_DIR}" \ > - --tmppath "${GENIMAGE_TMP}" \ > - --inputpath "${BINARIES_DIR}" \ > - --outputpath "${BINARIES_DIR}" \ > - --config "${GENIMAGE_CFG}" > diff --git a/board/nanopi-neo/readme.txt b/board/nanopi-neo/readme.txt > deleted file mode 100644 > index 539df54..0000000 > --- a/board/nanopi-neo/readme.txt > +++ /dev/null > @@ -1,42 +0,0 @@ > -Intro > -===== > - > -The instructions herein are valid for the FriendlyARM NanoPi NEO, > -both the 256MiB and 512MiB versions. They should also work for the > -NanoPi NEO Air, but this is untested so far. > - > -The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: > - - quad-core Cortex-A7 @1.2GHz > - - 256 or 512MiB of DDR > - - uSDCard as only storage option > - - 3x USB 2.0 host (one socket, two on expansion pin-holes) > - - 1x USB 2.0 OTG (also used as power source) > - - 10/100 ethernet MAC > - - GPIOs, SPI, I2c... > - > -Support for the Nanopi NEO in U-Boot and Linux is very recent, so only > -core, basic features are available. > - > -Unfortunately, support for the ethernet MAC and the USB OTG are not > -yet upstream, but are being actively worked on. > - > - > -How to build > -============ > - > - $ make nanopi_neo_defconfig > - $ make > - > -Note: you will need access to the internet to download the required > -sources. > - > -You will then obtain an image ready to be written to your micro SDcard: > - > - $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M > - > -Notes: > - - replace 'sdX' with the actual device with your micro SDcard, > - - you may need to be root to do that (use 'sudo'). > - > -Insert the micro SDcard in your NanoPi NEO and power it up. The console > -is on the serial line, 115200 8N1. > diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig > index fbc0902..a227052 100644 > --- a/configs/nanopi_neo_defconfig > +++ b/configs/nanopi_neo_defconfig > @@ -4,8 +4,8 @@ BR2_ARM_FPU_VFPV4=y > > BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo" > BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO" > -BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh" > -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh" > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo/post-build.sh" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/friendlyarm/nanopi-neo/post-image.sh" > > # Linux headers same as kernel, a 4.10 series > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y > -- > 1.7.9.5 >
Hello, On Sun, 18 Jun 2017 23:53:09 +0530, Chakra Divi wrote: > As the vendor folder friendlyarm is created, > moved board nanopi-neo also under vendor > folder. > > Signed-off-by: Chakra Divi <chakra@openedev.com> > --- > - Moved nanopi-neo under friendly arm > - Yann E. MORIN, can you please help test these Changes Applied to master, thanks. Thomas
diff --git a/board/friendlyarm/nanopi-neo/boot.cmd b/board/friendlyarm/nanopi-neo/boot.cmd new file mode 100644 index 0000000..7874057 --- /dev/null +++ b/board/friendlyarm/nanopi-neo/boot.cmd @@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-neo.dtb + +bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/friendlyarm/nanopi-neo/genimage.cfg b/board/friendlyarm/nanopi-neo/genimage.cfg new file mode 100644 index 0000000..ad43d31 --- /dev/null +++ b/board/friendlyarm/nanopi-neo/genimage.cfg @@ -0,0 +1,34 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h3-nanopi-neo.dtb", + "boot.scr" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 32M + } +} diff --git a/board/friendlyarm/nanopi-neo/post-build.sh b/board/friendlyarm/nanopi-neo/post-build.sh new file mode 100755 index 0000000..e6791e7 --- /dev/null +++ b/board/friendlyarm/nanopi-neo/post-build.sh @@ -0,0 +1,12 @@ +#!/bin/sh +# post-build.sh for Nanopi NEO, based on the Orange Pi PC +# 2013, Carlo Caione <carlo.caione@gmail.com> +# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr> + +BOARD_DIR="$( dirname "${0}" )" +MKIMAGE="${HOST_DIR}/usr/bin/mkimage" +BOOT_CMD="${BOARD_DIR}/boot.cmd" +BOOT_CMD_H="${BINARIES_DIR}/boot.scr" + +# U-Boot script +"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}" diff --git a/board/friendlyarm/nanopi-neo/post-image.sh b/board/friendlyarm/nanopi-neo/post-image.sh new file mode 100755 index 0000000..740386e --- /dev/null +++ b/board/friendlyarm/nanopi-neo/post-image.sh @@ -0,0 +1,15 @@ +#!/bin/sh +# post-image.sh for Nanopi NEO, based on the Orange Pi PC + +BOARD_DIR="$( dirname "${0}" )" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" diff --git a/board/friendlyarm/nanopi-neo/readme.txt b/board/friendlyarm/nanopi-neo/readme.txt new file mode 100644 index 0000000..539df54 --- /dev/null +++ b/board/friendlyarm/nanopi-neo/readme.txt @@ -0,0 +1,42 @@ +Intro +===== + +The instructions herein are valid for the FriendlyARM NanoPi NEO, +both the 256MiB and 512MiB versions. They should also work for the +NanoPi NEO Air, but this is untested so far. + +The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: + - quad-core Cortex-A7 @1.2GHz + - 256 or 512MiB of DDR + - uSDCard as only storage option + - 3x USB 2.0 host (one socket, two on expansion pin-holes) + - 1x USB 2.0 OTG (also used as power source) + - 10/100 ethernet MAC + - GPIOs, SPI, I2c... + +Support for the Nanopi NEO in U-Boot and Linux is very recent, so only +core, basic features are available. + +Unfortunately, support for the ethernet MAC and the USB OTG are not +yet upstream, but are being actively worked on. + + +How to build +============ + + $ make nanopi_neo_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +You will then obtain an image ready to be written to your micro SDcard: + + $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M + +Notes: + - replace 'sdX' with the actual device with your micro SDcard, + - you may need to be root to do that (use 'sudo'). + +Insert the micro SDcard in your NanoPi NEO and power it up. The console +is on the serial line, 115200 8N1. diff --git a/board/nanopi-neo/boot.cmd b/board/nanopi-neo/boot.cmd deleted file mode 100644 index 7874057..0000000 --- a/board/nanopi-neo/boot.cmd +++ /dev/null @@ -1,8 +0,0 @@ -setenv fdt_high ffffffff - -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait - -fatload mmc 0 $kernel_addr_r zImage -fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-neo.dtb - -bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/nanopi-neo/genimage.cfg b/board/nanopi-neo/genimage.cfg deleted file mode 100644 index ad43d31..0000000 --- a/board/nanopi-neo/genimage.cfg +++ /dev/null @@ -1,34 +0,0 @@ -image boot.vfat { - vfat { - files = { - "zImage", - "sun8i-h3-nanopi-neo.dtb", - "boot.scr" - } - } - size = 10M -} - -image sdcard.img { - hdimage { - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot-sunxi-with-spl.bin" - offset = 8192 - size = 1040384 # 1MB - 8192 - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - size = 32M - } -} diff --git a/board/nanopi-neo/post-build.sh b/board/nanopi-neo/post-build.sh deleted file mode 100755 index e6791e7..0000000 --- a/board/nanopi-neo/post-build.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh -# post-build.sh for Nanopi NEO, based on the Orange Pi PC -# 2013, Carlo Caione <carlo.caione@gmail.com> -# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr> - -BOARD_DIR="$( dirname "${0}" )" -MKIMAGE="${HOST_DIR}/usr/bin/mkimage" -BOOT_CMD="${BOARD_DIR}/boot.cmd" -BOOT_CMD_H="${BINARIES_DIR}/boot.scr" - -# U-Boot script -"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}" diff --git a/board/nanopi-neo/post-image.sh b/board/nanopi-neo/post-image.sh deleted file mode 100755 index 740386e..0000000 --- a/board/nanopi-neo/post-image.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh -# post-image.sh for Nanopi NEO, based on the Orange Pi PC - -BOARD_DIR="$( dirname "${0}" )" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" - -rm -rf "${GENIMAGE_TMP}" - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}" diff --git a/board/nanopi-neo/readme.txt b/board/nanopi-neo/readme.txt deleted file mode 100644 index 539df54..0000000 --- a/board/nanopi-neo/readme.txt +++ /dev/null @@ -1,42 +0,0 @@ -Intro -===== - -The instructions herein are valid for the FriendlyARM NanoPi NEO, -both the 256MiB and 512MiB versions. They should also work for the -NanoPi NEO Air, but this is untested so far. - -The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: - - quad-core Cortex-A7 @1.2GHz - - 256 or 512MiB of DDR - - uSDCard as only storage option - - 3x USB 2.0 host (one socket, two on expansion pin-holes) - - 1x USB 2.0 OTG (also used as power source) - - 10/100 ethernet MAC - - GPIOs, SPI, I2c... - -Support for the Nanopi NEO in U-Boot and Linux is very recent, so only -core, basic features are available. - -Unfortunately, support for the ethernet MAC and the USB OTG are not -yet upstream, but are being actively worked on. - - -How to build -============ - - $ make nanopi_neo_defconfig - $ make - -Note: you will need access to the internet to download the required -sources. - -You will then obtain an image ready to be written to your micro SDcard: - - $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M - -Notes: - - replace 'sdX' with the actual device with your micro SDcard, - - you may need to be root to do that (use 'sudo'). - -Insert the micro SDcard in your NanoPi NEO and power it up. The console -is on the serial line, 115200 8N1. diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index fbc0902..a227052 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -4,8 +4,8 @@ BR2_ARM_FPU_VFPV4=y BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo" BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh" -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/friendlyarm/nanopi-neo/post-image.sh" # Linux headers same as kernel, a 4.10 series BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y
As the vendor folder friendlyarm is created, moved board nanopi-neo also under vendor folder. Signed-off-by: Chakra Divi <chakra@openedev.com> --- - Moved nanopi-neo under friendly arm - Yann E. MORIN, can you please help test these Changes board/friendlyarm/nanopi-neo/boot.cmd | 8 ++++++ board/friendlyarm/nanopi-neo/genimage.cfg | 34 ++++++++++++++++++++++ board/friendlyarm/nanopi-neo/post-build.sh | 12 ++++++++ board/friendlyarm/nanopi-neo/post-image.sh | 15 ++++++++++ board/friendlyarm/nanopi-neo/readme.txt | 42 ++++++++++++++++++++++++++++ board/nanopi-neo/boot.cmd | 8 ------ board/nanopi-neo/genimage.cfg | 34 ---------------------- board/nanopi-neo/post-build.sh | 12 -------- board/nanopi-neo/post-image.sh | 15 ---------- board/nanopi-neo/readme.txt | 42 ---------------------------- configs/nanopi_neo_defconfig | 4 +-- 11 files changed, 113 insertions(+), 113 deletions(-) create mode 100644 board/friendlyarm/nanopi-neo/boot.cmd create mode 100644 board/friendlyarm/nanopi-neo/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo/post-build.sh create mode 100755 board/friendlyarm/nanopi-neo/post-image.sh create mode 100644 board/friendlyarm/nanopi-neo/readme.txt delete mode 100644 board/nanopi-neo/boot.cmd delete mode 100644 board/nanopi-neo/genimage.cfg delete mode 100755 board/nanopi-neo/post-build.sh delete mode 100755 board/nanopi-neo/post-image.sh delete mode 100644 board/nanopi-neo/readme.txt