mbox

[GIT,PULL,2/7] Broadcom devicetree changes for 4.13 (v2)

Message ID 20170613201044.9808-2-f.fainelli@gmail.com
State New
Headers show

Pull-request

http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree

Message

Florian Fainelli June 13, 2017, 8:10 p.m. UTC 
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:

  Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree

for you to fetch changes up to 4a579ecf3d4f964bd6b39605610201cd4d5a7e8e:

  Merge tag 'bcm2835-dt-next-2017-06-12' into devicetree/next (2017-06-13 12:38:48 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based Device Tree changes for 4.13.

Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.

Please pull the following:

- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
  also adds the MDIO controller nodes for later use by USB PHYs

- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
  platforms, he also adds a set of Device Tree sources and include files for the
  Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,

- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files

- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
  adds support for the USB OTG on the Raspberry Pi Zero which includes the
  proper dwc2 configuration, a generic USB PHY and finally the enabling of the
  OTG controller by including the proper DTS include file

- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
  than the SDHCI)

----------------------------------------------------------------
Baruch Siach (4):
      ARM: dts: bcm2835: fix uart0 pinctrl node names
      ARM: dts: bcm2835: fix i2c0 pins
      ARM: dts: bcm2835: fix uart0/uart1 pins
      ARM: dts: bcm2835: add index to the ethernet alias

Eric Anholt (3):
      ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
      ARM: dts: Cygnus: Add BCM11360's V3D device
      ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY

Florian Fainelli (2):
      Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/next
      Merge tag 'bcm2835-dt-next-2017-06-12' into devicetree/next

Gerd Hoffmann (1):
      ARM: dts: bcm283x: switch from &sdhci to &sdhost

Jon Mason (1):
      ARM: dts: NSP: Add Thermal Support

Rafał Miłecki (2):
      ARM: dts: BCM5301X: Add CPU thermal sensor and zone
      ARM: dts: BCM5301X: Specify MDIO bus in the DT

Stefan Wahren (4):
      ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
      ARM: dts: bcm283x: Add dtsi for OTG mode
      ARM: dts: bcm283x: Add generic USB PHY
      ARM: dts: bcm2835-rpi-zero: Enable OTG mode

 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/bcm-cygnus.dtsi           | 71 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm-nsp.dtsi              | 26 +++++++++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts      |  2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi          |  2 +-
 arch/arm/boot/dts/bcm2835.dtsi              |  4 ++
 arch/arm/boot/dts/bcm2836.dtsi              |  4 ++
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts       |  1 +
 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi |  2 +-
 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi |  2 +-
 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi  | 10 ++++
 arch/arm/boot/dts/bcm283x.dtsi              | 49 ++++++++++++++++----
 arch/arm/boot/dts/bcm5301x.dtsi             | 34 ++++++++++++++
 arch/arm/boot/dts/bcm911360_entphn.dts      | 20 ++++++++
 14 files changed, 215 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
 create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi

Comments

Florian Fainelli June 22, 2017, 10:42 p.m. UTC | #1 
On 06/13/2017 01:10 PM, Florian Fainelli wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
> 
>   Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
> 
> are available in the git repository at:
> 
>   http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree
> 
> for you to fetch changes up to 4a579ecf3d4f964bd6b39605610201cd4d5a7e8e:
> 
>   Merge tag 'bcm2835-dt-next-2017-06-12' into devicetree/next (2017-06-13 12:38:48 -0700)
> 
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM-based Device Tree changes for 4.13.
> 
> Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
> but they are also included here in order to keep this tag based off v4.12-rc1.
> 
> Please pull the following:
> 
> - Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
>   also adds the MDIO controller nodes for later use by USB PHYs
> 
> - Eric adds support for the V3D engine and Ethernet switch on the Cygnus
>   platforms, he also adds a set of Device Tree sources and include files for the
>   Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
> 
> - Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
> 
> - Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
>   adds support for the USB OTG on the Raspberry Pi Zero which includes the
>   proper dwc2 configuration, a generic USB PHY and finally the enabling of the
>   OTG controller by including the proper DTS include file
> 
> - Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
>   than the SDHCI)
> 
> ----------------------------------------------------------------

Same here:

https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/log/?h=brcm/dt