diff mbox

[2/2] mdio_bus: use devm_gpiod_get_optional()

Message ID 20170612210551.696721345@cogentembedded.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Sergei Shtylyov June 12, 2017, 8:55 p.m. UTC 
The MDIO reset GPIO is really a classical optional GPIO property case,
so devm_gpiod_get_optional() should have been used, not devm_gpiod_get().
Doing this  saves several LoCs...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 drivers/net/phy/mdio_bus.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
diff mbox

Patch

Index: net-next/drivers/net/phy/mdio_bus.c
===================================================================
--- net-next.orig/drivers/net/phy/mdio_bus.c
+++ net-next/drivers/net/phy/mdio_bus.c
@@ -354,16 +354,12 @@  int __mdiobus_register(struct mii_bus *b
 	mutex_init(&bus->mdio_lock);
 
 	/* de-assert bus level PHY GPIO reset */
-	gpiod = devm_gpiod_get(&bus->dev, "reset", GPIOD_OUT_LOW);
+	gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
-		err = PTR_ERR(gpiod);
-		if (err != -ENOENT) {
-			dev_err(&bus->dev,
-				"mii_bus %s couldn't get reset GPIO\n",
-				bus->id);
-			return err;
-		}
-	} else	{
+		dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
+			bus->id);
+		return PTR_ERR(gpiod);
+	} else	if (gpiod) {
 		bus->reset_gpiod = gpiod;
 
 		gpiod_set_value_cansleep(gpiod, 1);