@@ -129,12 +129,44 @@ static struct fec_platform_data mx28_fec_pdata[] = {
},
};
+static int __init mx28evk_fec_get_mac(void)
+{
+ int i, ret;
+ u32 val;
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code Freescale OUI (00:04:9f) here.
+ */
+ for (i = 0; i < 2; i++) {
+ ret = mxs_read_ocotp(0x20 + i * 0x10, 1, &val);
+ if (ret)
+ goto error;
+
+ mx28_fec_pdata[i].mac[0] = 0x00;
+ mx28_fec_pdata[i].mac[1] = 0x04;
+ mx28_fec_pdata[i].mac[2] = 0x9f;
+ mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+ mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+ mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+ }
+
+ return 0;
+
+error:
+ pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
+ return ret;
+}
+
static void __init mx28evk_init(void)
{
mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
mx28_add_duart();
+ if (mx28evk_fec_get_mac())
+ pr_warn("%s: failed on fec mac setup\n", __func__);
+
mx28evk_fec_reset();
mx28_add_fec(0, &mx28_fec_pdata[0]);
#ifdef CONFIG_FEC2
Read fec mac address from ocotp and save it into fec_platform_data mac field for fec driver to use. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v2: - It's not necessary to remove "const" for fec_platform_data from platform-fec.c and devices-common.h, so add it back. - Hard-coding Freescale OUI (00:04:9f) instead of just the first two two octets. - Correct the return of mx28evk_fec_get_mac() and check it with caller arch/arm/mach-mxs/mach-mx28evk.c | 32 ++++++++++++++++++++++++++++++++ 1 files changed, 32 insertions(+), 0 deletions(-)