Patchwork 2.6.35.9 bug shown in dmesg (fwd)

login
register
mail settings
Submitter Stanislaw Gruszka
Date Jan. 3, 2011, 11 p.m.
Message ID <20110103230028.GA1456@localhost.localdomain>
Download mbox | patch
Permalink /patch/77353/
State Not Applicable
Headers show

Comments

Stanislaw Gruszka - Jan. 3, 2011, 11 p.m.
Hi

On Thu, Dec 30, 2010 at 12:57:41PM -0800, Russell Whitaker wrote:
> Since sending the email below found some more info:
> 
> Tried several kernels from 2.6.32.16 up - same problem.
> 
> If I build kernel using "ATA/ATAPI/MFM/RLL=y" and right choices in
> sub-menu (and fstab with hd...) There is no problem.
> 
> Making change to "serial ATA (prod) and parallel ATA (experimental)=y"
> the computer crashes during boot-up about 1/3 of the time.
> 
> Hardware:
>   Tyan mb s2466 Tiger MPX (2 cpu)
>   2 segate hd on primary ide
> 
> If you send me a patch, will try it and let you know what happens.

BUG is from amd76xrom MTD driver, there is some resources conflict.
Below patch should fix oops in simple_map_write(), but not the conflict.
Please apply it to confirm oops fix and to show us contents of
/proc/iomem on ATA/ATAPI/MFM/RLL and on experimental parallel ATA
for compare.

Stanislaw

---
From 8bcfe30f1c52b1fe61b2885731421ab5998f0629 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stf_xl@wp.pl>
Date: Mon, 3 Jan 2011 23:32:34 +0100
Subject: [PATCH] amd76xrom: fix oops at boot when resources are not available

For some unknown reason resources needed by amd76xrom driver can not be
available. Instead of return error, driver crash the kernel with
messages like below. Patch fix that.

amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?

BUG: unable to handle kernel paging request at f862aaa0
IP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs]
*pde = 36ad2067 *pte = 00000000
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host0/target0:0:1/0:0:1:0/block/sdb/removable
Modules linked in: rtc_core thermal_sys jedec_probe serio_raw rtc_lib snd_ca0106 snd_rawmidi snd_seq_device snd_ac97_codec cfi_probe hwmon gen_probe cfi_util amd76xrom(+) ac97_bus snd_pcm snd_timer container mtd amd_rng snd amd_k7_agp chipreg map_funcs
+snd_page_alloc agpgart button

Pid: 690, comm: modprobe Not tainted 2.6.35.9-smp #1 S2466 TIGER MPX/Unknown
EIP: 0060:[<f8120282>] EFLAGS: 00010212 CPU: 1
EIP is at simple_map_write+0x82/0xbb [map_funcs]
EAX: 000000aa EBX: 00000020 ECX: 00000008 EDX: 000000aa
ESI: f6869a48 EDI: f862aaa0 EBP: f6869a74 ESP: f6869a48
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process modprobe (pid: 690, ti=f6868000 task=f738ecb0 task.ti=f6868000)
Stack:
 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa
<0> 00000008 f6869b84 f6869a9c f6869d90 f8159ad4 000000aa 000000aa 000000aa
<0> 000000aa 000000aa 000000aa 000000aa 000000aa 000aaaa0 00000000 00000004
Call Trace:
 [<f8159ad4>] ? cfi_qry_mode_on+0xc74/0x1130 [cfi_util]
 [<f864be7c>] ? jedec_probe_chip+0x6fc/0x1394 [jedec_probe]
 [<f819c1c1>] ? cfi_probe_chip+0x41/0x48c [cfi_probe]
 [<f815d1aa>] ? mtd_do_chip_probe+0xaa/0x358 [gen_probe]
 [<f819c00d>] ? cfi_probe+0xd/0x10 [cfi_probe]
 [<f8129154>] ? do_map_probe+0x24/0x73 [chipreg]
 [<f812621a>] ? init_amd76xrom+0x21a/0x3d2 [amd76xrom]
 [<c100122d>] ? do_one_initcall+0x2d/0x180
 [<f8126000>] ? init_amd76xrom+0x0/0x3d2 [amd76xrom]
 [<c10614eb>] ? sys_init_module+0x9b/0x1e0
 [<c10aa49d>] ? sys_write+0x3d/0x70
 [<c134f83c>] ? syscall_call+0x7/0xb
Code: 7f 17 f0 83 04 24 00 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8d 74 26 00 01 cf 81 fb ff 01 00 00 77 2e 89 d9 c1 e9 02 8d 75 d4 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 eb ca 90 01 cf 88 07 eb c3 66
EIP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs] SS:ESP 0068:f6869a48
CR2: 00000000f862aaa0

Reported-by: Russell Whitaker <russ@ashlandhome.net>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
 drivers/mtd/maps/amd76xrom.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
Russell Whitaker - Jan. 6, 2011, 6:21 a.m.
On Tue, 4 Jan 2011, Stanislaw Gruszka wrote:

> Hi
>
> On Thu, Dec 30, 2010 at 12:57:41PM -0800, Russell Whitaker wrote:
>> Since sending the email below found some more info:
>>
>> Tried several kernels from 2.6.32.16 up - same problem.
>>
>> If I build kernel using "ATA/ATAPI/MFM/RLL=y" and right choices in
>> sub-menu (and fstab with hd...) There is no problem.
>>
>> Making change to "serial ATA (prod) and parallel ATA (experimental)=y"
>> the computer crashes during boot-up about 1/3 of the time.
>>
>> Hardware:
>>   Tyan mb s2466 Tiger MPX (2 cpu)
>>   2 segate hd on primary ide
>>
>> If you send me a patch, will try it and let you know what happens.
>
> BUG is from amd76xrom MTD driver, there is some resources conflict.
> Below patch should fix oops in simple_map_write(), but not the conflict.
> Please apply it to confirm oops fix and to show us contents of
> /proc/iomem on ATA/ATAPI/MFM/RLL and on experimental parallel ATA
> for compare.
>
> Stanislaw
>
> ---
>> From 8bcfe30f1c52b1fe61b2885731421ab5998f0629 Mon Sep 17 00:00:00 2001
> From: Stanislaw Gruszka <stf_xl@wp.pl>
> Date: Mon, 3 Jan 2011 23:32:34 +0100
> Subject: [PATCH] amd76xrom: fix oops at boot when resources are not available
>
> For some unknown reason resources needed by amd76xrom driver can not be
> available. Instead of return error, driver crash the kernel with
> messages like below. Patch fix that.
>
> amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?

Sorry, in my case that's the wrong bug. First found the bug using 
Slackware-current. So I stripped down his config file by removing most 
of what I can't use, recompiled, and the bug was still there.

I'm not using amd76xrom so went into a MTD submenu and changed it to not 
set, etc, and found the bug is still there.

The bug is in pata (experimental). By comparison, ide (depreciated) has
been working solid for years.

comparing config for linux-2.6.35.10, ide vs pata and no other changes:

4c4
< # Tue Jan  4 19:12:25 2011
---
> # Tue Jan  4 12:27:07 2011
1057,1119c1057
< CONFIG_IDE=y
< 
< #
< # Please see Documentation/ide/ide.txt for help/info on IDE drives
< #
< CONFIG_IDE_XFER_MODE=y
< CONFIG_IDE_TIMINGS=y
< CONFIG_IDE_ATAPI=y
< # CONFIG_BLK_DEV_IDE_SATA is not set
< CONFIG_IDE_GD=y
< CONFIG_IDE_GD_ATA=y
< CONFIG_IDE_GD_ATAPI=y
< CONFIG_BLK_DEV_IDECD=y
< CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
< # CONFIG_BLK_DEV_IDETAPE is not set
< CONFIG_BLK_DEV_IDEACPI=y
< # CONFIG_IDE_TASK_IOCTL is not set
< CONFIG_IDE_PROC_FS=y
< 
< #
< # IDE chipset support/bugfixes
< #
< # CONFIG_IDE_GENERIC is not set
< # CONFIG_BLK_DEV_PLATFORM is not set
< # CONFIG_BLK_DEV_CMD640 is not set
< # CONFIG_BLK_DEV_IDEPNP is not set
< CONFIG_BLK_DEV_IDEDMA_SFF=y
< 
< #
< # PCI IDE chipsets support
< #
< CONFIG_BLK_DEV_IDEPCI=y
< CONFIG_IDEPCI_PCIBUS_ORDER=y
< # CONFIG_BLK_DEV_GENERIC is not set
< # CONFIG_BLK_DEV_RZ1000 is not set
< CONFIG_BLK_DEV_IDEDMA_PCI=y
< # CONFIG_BLK_DEV_AEC62XX is not set
< # CONFIG_BLK_DEV_ALI15X3 is not set
< CONFIG_BLK_DEV_AMD74XX=y
< # CONFIG_BLK_DEV_ATIIXP is not set
< # CONFIG_BLK_DEV_CMD64X is not set
< # CONFIG_BLK_DEV_TRIFLEX is not set
< # CONFIG_BLK_DEV_CS5530 is not set
< # CONFIG_BLK_DEV_CS5535 is not set
< # CONFIG_BLK_DEV_CS5536 is not set
< # CONFIG_BLK_DEV_HPT366 is not set
< # CONFIG_BLK_DEV_JMICRON is not set
< # CONFIG_BLK_DEV_SC1200 is not set
< # CONFIG_BLK_DEV_PIIX is not set
< # CONFIG_BLK_DEV_IT8172 is not set
< # CONFIG_BLK_DEV_IT8213 is not set
< # CONFIG_BLK_DEV_IT821X is not set
< # CONFIG_BLK_DEV_NS87415 is not set
< # CONFIG_BLK_DEV_PDC202XX_OLD is not set
< # CONFIG_BLK_DEV_PDC202XX_NEW is not set
< # CONFIG_BLK_DEV_SVWKS is not set
< # CONFIG_BLK_DEV_SIIMAGE is not set
< # CONFIG_BLK_DEV_SIS5513 is not set
< # CONFIG_BLK_DEV_SLC90E66 is not set
< # CONFIG_BLK_DEV_TRM290 is not set
< # CONFIG_BLK_DEV_VIA82CXXX is not set
< # CONFIG_BLK_DEV_TC86C001 is not set
< CONFIG_BLK_DEV_IDEDMA=y
---
> # CONFIG_IDE is not set
1154a1093
> CONFIG_SCSI_SAS_ATA=y
1161c1100,1183
< # CONFIG_ATA is not set
---
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> # CONFIG_SATA_PMP is not set
> 
> #
> # Controllers with non-SFF native interface
> #
> # CONFIG_SATA_AHCI is not set
> # CONFIG_SATA_AHCI_PLATFORM is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> 
> #
> # SFF controllers with custom DMA interface
> #
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> CONFIG_ATA_BMDMA=y
> 
> #
> # SATA SFF controllers with BMDMA
> #
> # CONFIG_ATA_PIIX is not set
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> 
> #
> # PATA SFF controllers with BMDMA
> #
> # CONFIG_PATA_ALI is not set
> CONFIG_PATA_AMD=y
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_ATP867X is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CS5536 is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RDC is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SCH is not set
> # CONFIG_PATA_SERVERWORKS is not set
> CONFIG_PATA_SIL680=y
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> 
> #
> # PIO-only SFF controllers
> #
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_RZ1000 is not set
> 
> #
> # Generic fallback / legacy drivers
> #
> CONFIG_PATA_ACPI=y
> CONFIG_ATA_GENERIC=y
2088d2109
< # CONFIG_LEDS_TRIGGER_IDE_DISK is not set

Here are my thoughts on what's happening:

Typical time for one revolution of the hard drive's platter is 8.3
milliseconds. Let's assume setup takes time t to initialize the hard
drive(s). Then the actual time for setup to be completed is a random
number between time t and time t plus 8.3 milliseconds.

During boot and measuring from the same begining of time t, let's
assume the second cpu tries to access the hard drive at time t plus
4 milliseconds. Now the computer boots up corectly half the time and
shows a bug the other half.

Since the bug is not in ide (depreciated) there must be some small
easily overlooked detail that was not brought forward.

Hope this helps,
    Russ

> BUG: unable to handle kernel paging request at f862aaa0
> IP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs]
> *pde = 36ad2067 *pte = 00000000
> Oops: 0002 [#1] SMP
> last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host0/target0:0:1/0:0:1:0/block/sdb/removable
> Modules linked in: rtc_core thermal_sys jedec_probe serio_raw rtc_lib snd_ca0106 snd_rawmidi snd_seq_device snd_ac97_codec cfi_probe hwmon gen_probe cfi_util amd76xrom(+) ac97_bus snd_pcm snd_timer container mtd amd_rng snd amd_k7_agp chipreg map_funcs
> +snd_page_alloc agpgart button
>
> Pid: 690, comm: modprobe Not tainted 2.6.35.9-smp #1 S2466 TIGER MPX/Unknown
> EIP: 0060:[<f8120282>] EFLAGS: 00010212 CPU: 1
> EIP is at simple_map_write+0x82/0xbb [map_funcs]
> EAX: 000000aa EBX: 00000020 ECX: 00000008 EDX: 000000aa
> ESI: f6869a48 EDI: f862aaa0 EBP: f6869a74 ESP: f6869a48
> DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> Process modprobe (pid: 690, ti=f6868000 task=f738ecb0 task.ti=f6868000)
> Stack:
> 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa
> <0> 00000008 f6869b84 f6869a9c f6869d90 f8159ad4 000000aa 000000aa 000000aa
> <0> 000000aa 000000aa 000000aa 000000aa 000000aa 000aaaa0 00000000 00000004
> Call Trace:
> [<f8159ad4>] ? cfi_qry_mode_on+0xc74/0x1130 [cfi_util]
> [<f864be7c>] ? jedec_probe_chip+0x6fc/0x1394 [jedec_probe]
> [<f819c1c1>] ? cfi_probe_chip+0x41/0x48c [cfi_probe]
> [<f815d1aa>] ? mtd_do_chip_probe+0xaa/0x358 [gen_probe]
> [<f819c00d>] ? cfi_probe+0xd/0x10 [cfi_probe]
> [<f8129154>] ? do_map_probe+0x24/0x73 [chipreg]
> [<f812621a>] ? init_amd76xrom+0x21a/0x3d2 [amd76xrom]
> [<c100122d>] ? do_one_initcall+0x2d/0x180
> [<f8126000>] ? init_amd76xrom+0x0/0x3d2 [amd76xrom]
> [<c10614eb>] ? sys_init_module+0x9b/0x1e0
> [<c10aa49d>] ? sys_write+0x3d/0x70
> [<c134f83c>] ? syscall_call+0x7/0xb
> Code: 7f 17 f0 83 04 24 00 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8d 74 26 00 01 cf 81 fb ff 01 00 00 77 2e 89 d9 c1 e9 02 8d 75 d4 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 eb ca 90 01 cf 88 07 eb c3 66
> EIP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs] SS:ESP 0068:f6869a48
> CR2: 00000000f862aaa0
>
> Reported-by: Russell Whitaker <russ@ashlandhome.net>
> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
> ---
> drivers/mtd/maps/amd76xrom.c |    1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
> index 19fe92d..370509a 100644
> --- a/drivers/mtd/maps/amd76xrom.c
> +++ b/drivers/mtd/maps/amd76xrom.c
> @@ -154,6 +154,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
> 			__func__,
> 			(unsigned long long)window->rsrc.start,
> 			(unsigned long long)window->rsrc.end);
> +		return -EBUSY;
> 	}
>
>
> -- 
> 1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stanislaw Gruszka - Jan. 6, 2011, 4:19 p.m.
On Wed, Jan 05, 2011 at 10:21:21PM -0800, Russell Whitaker wrote:
> >For some unknown reason resources needed by amd76xrom driver can not be
> >available. Instead of return error, driver crash the kernel with
> >messages like below. Patch fix that.
> >
> >amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
> 
> Sorry, in my case that's the wrong bug. First found the bug using
> Slackware-current. So I stripped down his config file by removing
> most of what I can't use, recompiled, and the bug was still there.
> 
> I'm not using amd76xrom so went into a MTD submenu and changed it to
> not set, etc, and found the bug is still there.

I do not see any other problems except that one:

	BUG: unable to handle kernel paging request at f862aaa0
	IP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs]

in dmesg's you provided in the first email. That BUG is from amd75xrom
driver. Does dmesg without MTD compiled show something different?
And this is also not clear for me from your first email, crash happened
every time with pata or randomly?

Stanislaw
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Russell Whitaker - Jan. 6, 2011, 7:09 p.m.
On Thu, 6 Jan 2011, Stanislaw Gruszka wrote:

> On Wed, Jan 05, 2011 at 10:21:21PM -0800, Russell Whitaker wrote:
>>> For some unknown reason resources needed by amd76xrom driver can not be
>>> available. Instead of return error, driver crash the kernel with
>>> messages like below. Patch fix that.
>>>
>>> amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
>>
>> Sorry, in my case that's the wrong bug. First found the bug using
>> Slackware-current. So I stripped down his config file by removing
>> most of what I can't use, recompiled, and the bug was still there.
>>
>> I'm not using amd76xrom so went into a MTD submenu and changed it to
>> not set, etc, and found the bug is still there.
>
> I do not see any other problems except that one:
>
> 	BUG: unable to handle kernel paging request at f862aaa0
> 	IP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs]
>
> in dmesg's you provided in the first email. That BUG is from amd75xrom
> driver. Does dmesg without MTD compiled show something different?

The " - kernel bug?" line is gone.

> And this is also not clear for me from your first email, crash happened
> every time with pata or randomly?

There are two bugs. In order to reduce the problem to only one bug I
complied 2.6.35.10-smp without MTD's 4 drivers where the name starts
with "bios" and also compiled with pata.

Result, first four attempts at booting: oops 3, success 1.

To verify the problem is in pata I then replaced the pata code with the
ATA (depreciated) code, with no other changes, and recompiled.

Result, all attempts at booting: success every time.

(note: changing the kernel also means changing /etc/fstab to match)

   Russ
>
> Stanislaw
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stanislaw Gruszka - Jan. 7, 2011, 8:32 p.m.
On Thu, Jan 06, 2011 at 11:09:21AM -0800, Russell Whitaker wrote:
> >>Sorry, in my case that's the wrong bug. First found the bug using
> >>Slackware-current. So I stripped down his config file by removing
> >>most of what I can't use, recompiled, and the bug was still there.
> >>
> >>I'm not using amd76xrom so went into a MTD submenu and changed it to
> >>not set, etc, and found the bug is still there.
> >
> >I do not see any other problems except that one:
> >
> >	BUG: unable to handle kernel paging request at f862aaa0
> >	IP: [<f8120282>] simple_map_write+0x82/0xbb [map_funcs]
> >
> >in dmesg's you provided in the first email. That BUG is from amd75xrom
> >driver. Does dmesg without MTD compiled show something different?
> 
> The " - kernel bug?" line is gone.
???

> >And this is also not clear for me from your first email, crash happened
> >every time with pata or randomly?
> 
> There are two bugs. In order to reduce the problem to only one bug I
> complied 2.6.35.10-smp without MTD's 4 drivers where the name starts
> with "bios" and also compiled with pata.
> 
> Result, first four attempts at booting: oops 3, success 1.

Ok, but on all dmesgs in your first email there was no oops
other than MTD one. If you want to have pata bug fixed, you need
to show where the problem is.

Stanislaw
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Russell Whitaker - Feb. 14, 2011, 2:50 a.m.
On Fri, 7 Jan 2011, Stanislaw Gruszka wrote:

[..]
>
> Ok, but on all dmesgs in your first email there was no oops
> other than MTD one. If you want to have pata bug fixed, you need
> to show where the problem is.
>
> Stanislaw
>
Ok, you are right. Somewhat started over and now got a saved "dmesg"
with the newer kernel. Copy of dmesg attached.

Background info:
   motherboard: Tyan Tiger MPX, 2 AMD cpu's
   software: Slackware-current 2/14/2011, "A" series
             Selected Huge-SMP kernel

Thank you,
   Russ
xe820147f]
[    0.139723] pci 0000:03:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.139745] pci 0000:03:08.0: supports D1 D2
[    0.139749] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.139755] pci 0000:03:08.0: PME# disabled
[    0.139793] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[    0.139867] pci 0000:00:10.0:   bridge window [io  0x3000-0x3fff]
[    0.139873] pci 0000:00:10.0:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.139879] pci 0000:00:10.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.139892] pci_bus 0000:00: on NUMA node 0
[    0.139899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.140058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.140136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT]
[    0.144214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11)
[    0.145407] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *0, disabled.
[    0.145936] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11)
[    0.146434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11)
[    0.146781] HEST: Table is not found!
[    0.147132] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.147136] vgaarb: loaded
[    0.147379] SCSI subsystem initialized
[    0.148118] libata version 3.00 loaded.
[    0.148118] usbcore: registered new interface driver usbfs
[    0.148139] usbcore: registered new interface driver hub
[    0.149059] usbcore: registered new device driver usb
[    0.166966] raid6: int32x1    707 MB/s
[    0.184004] raid6: int32x2    628 MB/s
[    0.201050] raid6: int32x4    511 MB/s
[    0.218015] raid6: int32x8    496 MB/s
[    0.234951] raid6: mmxx1     1320 MB/s
[    0.251958] raid6: mmxx2     2156 MB/s
[    0.269013] raid6: sse1x1     460 MB/s
[    0.285969] raid6: sse1x2     917 MB/s
[    0.286002] raid6: using algorithm sse1x2 (917 MB/s)
[    0.286091] PCI: Using ACPI for IRQ routing
[    0.286168] PCI: pci_cache_line_size set to 32 bytes
[    0.286243] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.286250] reserve RAM buffer: 000000009fef0000 - 000000009fffffff 
[    0.286255] reserve RAM buffer: 000000009ff80000 - 000000009fffffff 
[    0.293067] pnp: PnP ACPI init
[    0.293192] ACPI: bus type pnp registered
[    0.299162] pnp: PnP ACPI: found 13 devices
[    0.299162] ACPI: ACPI bus type pnp unregistered
[    0.299185] system 00:00: [mem 0xfffc0000-0xffffffff] has been reserved
[    0.299261] system 00:00: [mem 0xffc00000-0xfff7ffff] has been reserved
[    0.299336] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.299411] system 00:00: [mem 0x00100000-0x9fffffff] could not be reserved
[    0.299485] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.299568] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.343429] Switching to clocksource acpi_pm
[    0.343612] pci 0000:00:10.0: BAR 9: assigned [mem 0xa0000000-0xa00fffff pref]
[    0.343721] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8040000-0xe805ffff pref]
[    0.343828] pci 0000:01:05.1: PCI bridge to [bus 02-02]
[    0.343900] pci 0000:01:05.1:   bridge window [io  disabled]
[    0.343978] pci 0000:01:05.1:   bridge window [mem 0xe8100000-0xe81fffff]
[    0.343999] pci 0000:01:05.1:   bridge window [mem pref disabled]
[    0.343999] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.343999] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.343999] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe81fffff]
[    0.343999] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.343999] pci 0000:03:08.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
[    0.344051] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[    0.344123] pci 0000:00:10.0:   bridge window [io  0x3000-0x3fff]
[    0.344198] pci 0000:00:10.0:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.344286] pci 0000:00:10.0:   bridge window [mem 0xa0000000-0xa00fffff pref]
[    0.344422] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.344426] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.344431] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.344435] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe81fffff]
[    0.344439] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.344444] pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe81fffff]
[    0.344448] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.344452] pci_bus 0000:03: resource 1 [mem 0xe8200000-0xe82fffff]
[    0.344456] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa00fffff pref]
[    0.344538] NET: Registered protocol family 2
[    0.344696] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.345309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.348005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.349385] TCP: Hash tables configured (established 131072 bind 65536)
[    0.349464] TCP reno registered
[    0.349540] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.349650] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.349962] NET: Registered protocol family 1
[    0.350235] RPC: Registered udp transport module.
[    0.350318] RPC: Registered tcp transport module.
[    0.350388] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.350479] pci 0000:00:00.0: BIOS failed to enable PCI standards compliance; fixing this error
[    0.350613] pci 0000:01:05.0: Boot video device
[    0.350671] PCI: CLS 64 bytes, default 32
[    0.353746] audit: initializing netlink socket (disabled)
[    0.353850] type=2000 audit(1297557217.353:1): initialized
[    0.354320] highmem bounce pool size: 64 pages
[    0.361087] VFS: Disk quotas dquot_6.5.2
[    0.361328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.362055] DLM (built Feb  7 2011 23:48:44) installed
[    0.364709] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.365518] NTFS driver 2.1.29 [Flags: R/W].
[    0.365880] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.366491] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.376470] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.378105] SGI XFS Quota Management subsystem
[    0.378185] OCFS2 1.5.0
[    0.378740] ocfs2: Registered cluster interface o2cb
[    0.379021] ocfs2: Registered cluster interface user
[    0.379094] OCFS2 DLMFS 1.5.0
[    0.379391] OCFS2 User DLM kernel interface loaded
[    0.379464] OCFS2 Node Manager 1.5.0
[    0.379841] OCFS2 DLM 1.5.0
[    0.380557] Btrfs loaded
[    0.381869] Slow work thread pool: Starting up
[    0.382054] Slow work thread pool: Ready
[    0.382138] GFS2 (built Feb  7 2011 23:49:10) installed
[    0.382233] msgmni has been set to 1679
[    0.382724] alg: No test for cipher_null (cipher_null-generic)
[    0.382884] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    0.383077] alg: No test for digest_null (digest_null-generic)
[    0.383216] alg: No test for compress_null (compress_null-generic)
[    0.385396] alg: No test for fcrypt (fcrypt-generic)
[    0.389574] alg: No test for stdrng (krng)
[    0.389668] async_tx: api initialized (async)
[    0.390025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.390134] io scheduler noop registered
[    0.390203] io scheduler deadline registered
[    0.390360] io scheduler cfq registered (default)
[    0.390976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.391787] ERST: Table is not found!
[    0.391871] isapnp: Scanning for PnP cards...
[    0.748787] isapnp: No Plug & Play device found
[    0.757359] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.002192] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.246191] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.247234] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.247674] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.248513] Floppy drive(s): fd0 is 1.44M
[    1.262829] FDC 0 is a post-1991 82077
[    1.268840] brd: module loaded
[    1.271293] loop: module loaded
[    1.271365] Compaq SMART2 Driver (v 2.6.0)
[    1.271671] HP CISS Driver (v 3.6.20)
[    1.273808] Loading iSCSI transport class v2.0-870.
[    1.275357] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    1.279698] Adaptec aacraid driver 1.1-5[26400]-ms
[    1.280141] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.280789] scsi: <fdomain> Detection failed (no card)
[    1.280883] sym53c416.c: Version 1.0.0-ac
[    1.280978] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    1.281192] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[    1.281586] iscsi: registered transport (qla4xxx)
[    1.281763] QLogic iSCSI HBA Driver
[    1.281832] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
[    1.281904] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    1.282109] Brocade BFA FC/FCOE SCSI driver - version: 2.1.2.1
[    1.304056] Failed initialization of WD-7000 SCSI card!
[    1.355584] DC390: clustering now enabled by default. If you get problems load
[    1.355690]        with "disable_clustering=1" and report to maintainers
[    1.355997] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    1.356318] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    1.356498] megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
[    1.356688] mpt2sas version 05.100.00.02 loaded
[    1.357115] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    1.357492] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.357665] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.357884] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    1.358101] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[    1.358325] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    1.358500] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    1.359002] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[    1.361769] pata_amd 0000:00:07.1: version 0.4.1
[    1.361889] pata_amd 0000:00:07.1: setting latency timer to 64
[    1.362137] scsi2 : pata_amd
[    1.362621] scsi3 : pata_amd
[    1.362921] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.362998] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.368001] I2O subsystem v1.325
[    1.368077] i2o: max drivers = 8
[    1.368591] I2O Configuration OSM v1.323
[    1.368753] I2O Bus Adapter OSM v1.317
[    1.368917] I2O Block Device OSM v1.325
[    1.369448] I2O SCSI Peripheral OSM v1.316
[    1.369614] I2O ProcFS OSM v1.316
[    1.369799] Fusion MPT base driver 3.04.15
[    1.369869] Copyright (c) 1999-2008 LSI Corporation
[    1.369946] Fusion MPT SPI Host driver 3.04.15
[    1.370139] Fusion MPT FC Host driver 3.04.15
[    1.370345] Fusion MPT SAS Host driver 3.04.15
[    1.370534] Fusion MPT misc device (ioctl) driver 3.04.15
[    1.370828] mptctl: Registered with Fusion MPT base driver
[    1.370902] mptctl: /dev/mptctl @ (major,minor=10,220)
[    1.370975] Fusion MPT LAN driver 3.04.15
[    1.371345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.371642] 116x: driver isp116x-hcd, 03 Nov 2005
[    1.371809] driver isp1362-hcd, 2005-04-04
[    1.371978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.372105] ohci_hcd 0000:03:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.372218] ohci_hcd 0000:03:00.0: OHCI Host Controller
[    1.372499] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.372663] ohci_hcd 0000:03:00.0: irq 19, io mem 0xe8200000
[    1.425088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.425164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.425279] usb usb1: Product: OHCI Host Controller
[    1.425349] usb usb1: Manufacturer: Linux 2.6.35.11-smp ohci_hcd
[    1.425422] usb usb1: SerialNumber: 0000:03:00.0
[    1.425844] hub 1-0:1.0: USB hub found
[    1.425926] hub 1-0:1.0: 4 ports detected
[    1.427119] uhci_hcd: USB Universal Host Controller Interface driver
[    1.427546] sl811: driver sl811-hcd, 19 May 2005
[    1.427720] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    1.428211] Initializing USB Mass Storage driver...
[    1.428417] usbcore: registered new interface driver usb-storage
[    1.428490] USB Mass Storage support registered.
[    1.428658] usbcore: registered new interface driver ums-alauda
[    1.428829] usbcore: registered new interface driver ums-cypress
[    1.429008] usbcore: registered new interface driver ums-datafab
[    1.429182] usbcore: registered new interface driver ums-freecom
[    1.429367] usbcore: registered new interface driver ums-isd200
[    1.429538] usbcore: registered new interface driver ums-jumpshot
[    1.429708] usbcore: registered new interface driver ums-karma
[    1.429875] usbcore: registered new interface driver ums-onetouch
[    1.430058] usbcore: registered new interface driver ums-sddr09
[    1.430226] usbcore: registered new interface driver ums-sddr55
[    1.430407] usbcore: registered new interface driver ums-usbat
[    1.430741] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.433307] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.433387] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.434022] mice: PS/2 mouse device common for all mice
[    1.434208] md: linear personality registered for level -1
[    1.434294] md: raid0 personality registered for level 0
[    1.434365] md: raid1 personality registered for level 1
[    1.434437] md: raid10 personality registered for level 10
[    1.434508] md: raid6 personality registered for level 6
[    1.434579] md: raid5 personality registered for level 5
[    1.434649] md: raid4 personality registered for level 4
[    1.434720] md: multipath personality registered for level -4
[    1.435236] device-mapper: uevent: version 1.0.3
[    1.435689] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    1.436095] cpuidle: using governor ladder
[    1.436166] cpuidle: using governor menu
[    1.436374] TCP cubic registered
[    1.436443] Initializing XFRM netlink socket
[    1.436531] NET: Registered protocol family 17
[    1.436664] Using IPI No-Shortcut mode
[    1.455007] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.536507] ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100
[    1.536580] ata1.00: 78165360 sectors, multi 16: LBA 
[    1.537136] ata1.01: ATA-6: ST3160023A, 8.01, max UDMA/100
[    1.537209] ata1.01: 312581808 sectors, multi 16: LBA48 
[    1.559418] ata1.00: configured for UDMA/100
[    1.565425] ata1.01: configured for UDMA/100
[    1.565821] scsi 2:0:0:0: Direct-Access     ATA      ST340810A        3.39 PQ: 0 ANSI: 5
[    1.566676] sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.566875] sd 2:0:0:0: [sda] Write Protect is off
[    1.566948] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.566989] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.567691] scsi 2:0:1:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
[    1.568192]  sda: sda1 sda2 sda3
[    1.602752] sd 2:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.602834] sd 2:0:1:0: [sdb] Write Protect is off
[    1.602840] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.602874] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.603127]  sda4
[    1.603766]  sdb: sdb1 sdb2
[    1.621363] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.622065] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.757277] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL0C, max UDMA/66
[    1.757389] ata2.01: ATAPI: MATSHITA CD-RW CW-7586, 1.08, max MWDMA2
[    1.757490] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.779199] ata2.00: configured for UDMA/33
[    1.801291] ata2.01: configured for MWDMA2
[    1.803830] scsi 3:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL0C PQ: 0 ANSI: 5
[    1.809492] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.809605] Uniform CD-ROM driver Revision: 3.20
[    1.810132] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.812240] scsi 3:0:1:0: CD-ROM            MATSHITA CD-RW  CW-7586   1.08 PQ: 0 ANSI: 5
[    1.815522] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[    1.815999] sr 3:0:1:0: Attached scsi CD-ROM sr1
[    1.816404] registered taskstats version 1
[    1.816914] md: Waiting for all devices to be available before autodetect
[    1.816988] md: If you don't use raid, use raid=noautodetect
[    1.817565] md: Autodetecting RAID arrays.
[    1.817636] md: Scanned 0 and added 0 devices.
[    1.817705] md: autorun ...
[    1.817771] md: ... autorun DONE.
[    1.844852] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[    1.844981] REISERFS (device sda4): using ordered data mode
[    1.857852] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    1.860813] REISERFS (device sda4): checking transaction log (sda4)
[    1.882303] REISERFS (device sda4): Using r5 hash to sort names
[    1.882441] VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
[    1.882564] devtmpfs: mounted
[    1.882692] Freeing unused kernel memory: 604k freed
[    1.884105] Write protecting the kernel text: 9844k
[    1.884264] Write protecting the kernel read-only data: 2516k
[    3.595785] udev[1085]: starting version 165
[    4.081211] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.081404] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    4.081534] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    4.081658] sr 3:0:1:0: Attached scsi generic sg3 type 5
[    4.167844] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 700d ss_vid 0 ss_did 0
[    4.167966] shpchp 0000:00:01.0: Cannot reserve MMIO region
[    4.168061] shpchp 0000:00:10.0: HPC vendor_id 1022 device_id 7448 ss_vid 0 ss_did 0
[    4.168166] shpchp 0000:00:10.0: Cannot reserve MMIO region
[    4.168475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.755831] 3c59x 0000:03:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.755955] 3c59x: Donald Becker and others.
[    4.756039] 0000:03:08.0: 3Com PCI 3c905C Tornado at f869e400.
[    5.049204] AMD768 RNG detected
[    5.222363] cfg80211: Calling CRDA to update world regulatory domain
[    5.602235] Linux agpgart interface v0.103
[    5.723667] "amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
[    5.747579] agpgart-amdk7 0000:00:00.0: AMD 760MP chipset
[    5.767140] agpgart-amdk7 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[    6.015708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    6.016246] ACPI: Power Button [PWRB]
[    6.016541] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    6.016781] ACPI: Power Button [PWRF]
[    6.016985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[    6.017184] ACPI: Sleep Button [SLPF]
[    6.352765] ACPI: acpi_idle registered with cpuidle
[    6.477116] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    6.477249] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    6.653728] CA0106 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.653882] snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
[    6.832982] [drm] Initialized drm 1.1.0 20060810
[    7.717906] BUG: unable to handle kernel paging request at f8c8aaa0
[    7.718009] IP: [<c14d38cf>] memcpy+0x1f/0x40
[    7.718009] *pde = 36b3f067 *pte = 00000000 
[    7.718009] Oops: 0002 [#1] SMP 
[    7.718009] last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host2/target2:0:0/2:0:0:0/block/sda/removable
[    7.718009] Modules linked in: jedec_probe parport drm snd_ca0106 mac80211 snd_rawmidi snd_seq_device rtc_cmos rtc_core eeprom_93cx6 processor cfi_probe thermal container gen_probe thermal_sys cfi_util rtc_lib button snd_ac97_codec ac97_bus snd_pcm snd_timer amd_k7_agp amd76xrom(+) hwmon agpgart mtd snd soundcore cfg80211 i2c_algo_bit i2c_amd756 amd_rng rfkill snd_page_alloc i2c_core chipreg 3c59x map_funcs mii evdev psmouse shpchp sg serio_raw
[    7.718009] 
[    7.718009] Pid: 1124, comm: modprobe Not tainted 2.6.35.11-smp #2 S2466 TIGER MPX/Unknown
[    7.718009] EIP: 0060:[<c14d38cf>] EFLAGS: 00010212 CPU: 0
[    7.718009] EIP is at memcpy+0x1f/0x40
[    7.718009] EAX: f8c8aaa0 EBX: 00000020 ECX: 00000008 EDX: f6aaba48
[    7.718009] ESI: f6aaba48 EDI: f8c8aaa0 EBP: f6aaba40 ESP: f6aaba34
[    7.718009]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    7.718009] Process modprobe (pid: 1124, ti=f6aaa000 task=f6aa0cf0 task.ti=f6aaa000)
[    7.718009] Stack:
[    7.718009]  000000aa 000aaaa0 f8be0000 f6aaba74 f867f0f3 000000aa 000000aa 000000aa
[    7.718009] <0> 000000aa 000000aa 000000aa 000000aa 000000aa 00000008 f6aabb84 f6aaba9c
[    7.718009] <0> f6aabd90 f86a2aec 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa
[    7.718009] Call Trace:
[    7.718009]  [<f867f0f3>] ? simple_map_write+0x83/0xa0 [map_funcs]
[    7.718009]  [<f86a2aec>] ? cfi_qry_mode_on+0xc7c/0x1130 [cfi_util]
[    7.718009]  [<f8d67eac>] ? jedec_probe_chip+0x71c/0x13a8 [jedec_probe]
[    7.718009]  [<f87061f6>] ? cfi_probe_chip+0x46/0x494 [cfi_probe]
[    7.718009]  [<f86ce1b2>] ? mtd_do_chip_probe+0xb2/0x398 [gen_probe]
[    7.718009]  [<c10254d0>] ? do_page_fault+0x0/0x370
[    7.718009]  [<f8706012>] ? cfi_probe+0x12/0x20 [cfi_probe]
[    7.718009]  [<f8697199>] ? do_map_probe+0x29/0x7b [chipreg]
[    7.718009]  [<f881a261>] ? init_amd76xrom+0x261/0x419 [amd76xrom]
[    7.718009]  [<c1001242>] ? do_one_initcall+0x32/0x190
[    7.718009]  [<f881a000>] ? init_amd76xrom+0x0/0x419 [amd76xrom]
[    7.718009]  [<c1074ba3>] ? sys_init_module+0x93/0x1d0
[    7.718009]  [<c10f20c2>] ? sys_write+0x42/0x70
[    7.718009]  [<c199ac6c>] ? syscall_call+0x7/0xb
[    7.718009] Code: 8d 74 26 00 e8 63 fd ff ff eb e8 90 55 89 e5 83 ec 0c 89 1c 24 89 74 24 04 89 7c 24 08 0f 1f 44 00 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 1c 24 8b 74 24 04 8b 7c 24 
[    7.718009] EIP: [<c14d38cf>] memcpy+0x1f/0x40 SS:ESP 0068:f6aaba34
[    7.718009] CR2: 00000000f8c8aaa0
[    7.718009] ---[ end trace 7d61458dad6b2dfe ]---
[    7.744480] parport_pc 00:0b: reported by Plug and Play ACPI
[    7.744688] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    7.816274] ppdev: user-space parallel port driver
[    7.858206] rtl8180 0000:03:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.033163] [drm] radeon defaulting to kernel modesetting.
[    8.033250] [drm] radeon kernel modesetting enabled.
[    8.033478] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.040981] [drm] initializing kernel modesetting (R200 0x1002:0x4242).
[    8.041329] [drm] register mmio base: 0xE8020000
[    8.041401] [drm] register mmio size: 131072
[    8.041836] agpgart-amdk7 0000:00:00.0: AGP 2.0 bridge
[    8.041928] agpgart-amdk7 0000:00:00.0: putting AGP V2 device into 4x mode
[    8.042043] radeon 0000:01:05.0: putting AGP V2 device into 4x mode
[    8.042150] radeon 0000:01:05.0: GTT: 64M 0xEC000000 - 0xEFFFFFFF
[    8.042228] [drm] Generation 1 PCI interface in multifunction mode
[    8.042301] [drm] Limiting VRAM to one aperture
[    8.042376] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)
[    8.042546] [drm] radeon: irq initialized.
[    8.048780] [drm] Detected VRAM RAM=128M, BAR=128M
[    8.048868] [drm] RAM width 128bits DDR
[    8.049191] [TTM] Zone  kernel: Available graphics memory: 430268 kiB.
[    8.049268] [TTM] Zone highmem: Available graphics memory: 1286048 kiB.
[    8.049342] [TTM] Initializing pool allocator.
[    8.049464] [drm] radeon: 64M of VRAM memory ready
[    8.049536] [drm] radeon: 64M of GTT memory ready.
[    8.050824] [drm] Loading R200 Microcode
[    8.054340] phy0: Selected rate control algorithm 'minstrel'
[    8.054727] phy0: hwaddr 08:10:74:a6:8b:ad, RTL8185vD + rtl8225z2
[    8.092368] [TTM] AGP Bind memory failed.
[    8.092457] [TTM] Couldn't bind backend.
[    8.092561] radeon 0000:01:05.0: object_init failed for (1048576, 0x00000002)
[    8.092638] radeon 0000:01:05.0: (-22) ring create failed
[    8.092711] radeon 0000:01:05.0: failled initializing CP (-22).
[    8.092784] radeon 0000:01:05.0: Disabling GPU acceleration
[    8.092860] [drm] radeon: cp finalized
[    8.092960] [drm] radeon: cp finalized
[    8.093109] [TTM] Finalizing pool allocator.
[    8.094065] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[    8.094141] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[    8.094214] [drm] radeon: ttm finalized
[    8.094290] [drm] Forcing AGP to PCI mode
[    8.094722] [drm] Generation 1 PCI interface in multifunction mode
[    8.094796] [drm] Limiting VRAM to one aperture
[    8.094871] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)
[    8.094976] radeon 0000:01:05.0: GTT: 512M 0xD0000000 - 0xEFFFFFFF
[    8.095103] [drm] radeon: irq initialized.
[    8.095183] [drm] Detected VRAM RAM=128M, BAR=128M
[    8.095254] [drm] RAM width 128bits DDR
[    8.095479] [TTM] Zone  kernel: Available graphics memory: 430268 kiB.
[    8.095554] [TTM] Zone highmem: Available graphics memory: 1286048 kiB.
[    8.095628] [TTM] Initializing pool allocator.
[    8.095742] [drm] radeon: 64M of VRAM memory ready
[    8.095814] [drm] radeon: 512M of GTT memory ready.
[    8.095897] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.104896] [drm] radeon: ring at 0x00000000D0000000
[    8.105038] [drm] ring test succeeded in 7 usecs
[    8.105283] [drm] radeon: ib pool ready.
[    8.105546] [drm] ib test succeeded in 0 usecs
[    8.105705] [drm] DFP table revision: 3
[    8.106512] [drm] Radeon Display Connectors
[    8.106590] [drm] Connector 0:
[    8.106658] [drm]   DVI-I
[    8.106725] [drm]   HPD1
[    8.106793] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    8.106864] [drm]   Encoders:
[    8.106933] [drm]     CRT1: INTERNAL_DAC1
[    8.107020] [drm]     DFP1: INTERNAL_TMDS1
[    8.238330] [drm] fb mappable at 0xF0040000
[    8.238402] [drm] vram apper at 0xF0000000
[    8.238471] [drm] size 5242880
[    8.238538] [drm] fb depth is 24
[    8.238605] [drm]    pitch is 5120
[    8.311302] Console: switching to colour frame buffer device 160x64
[    8.331774] fb0: radeondrmfb frame buffer device
[    8.331885] drm: registered panic notifier
[    8.331998] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
[    8.338722] [drm] initializing kernel modesetting (R200 0x1002:0x4243).
[    8.339111] radeon 0000:01:05.1: Fatal error during GPU init
[    8.339251] [drm] radeon: finishing device.
[    8.339355] [TTM] Memory type 2 has not been initialized.
[    8.339519] BUG: unable to handle kernel NULL pointer dereference at (null)
[    8.339701] IP: [<f905f797>] r100_cp_fini+0x57/0xb0 [radeon]
[    8.339970] *pde = 00000000 
[    8.340049] Oops: 0002 [#2] SMP 
[    8.340083] last sysfs file: /sys/devices/virtual/vtconsole/vtcon1/uevent
[    8.340083] Modules linked in: radeon(+) ttm rtl8180 ppdev drm_kms_helper parport_pc jedec_probe parport drm snd_ca0106 mac80211 snd_rawmidi snd_seq_device rtc_cmos rtc_core eeprom_93cx6 processor cfi_probe thermal container gen_probe thermal_sys cfi_util rtc_lib button snd_ac97_codec ac97_bus snd_pcm snd_timer amd_k7_agp amd76xrom(+) hwmon agpgart mtd snd soundcore cfg80211 i2c_algo_bit i2c_amd756 amd_rng rfkill snd_page_alloc i2c_core chipreg 3c59x map_funcs mii evdev psmouse shpchp sg serio_raw
[    8.340083] 
[    8.340083] Pid: 1187, comm: modprobe Tainted: G      D     2.6.35.11-smp #2 S2466 TIGER MPX/Unknown
[    8.340083] EIP: 0060:[<f905f797>] EFLAGS: 00010287 CPU: 0
[    8.340083] EIP is at r100_cp_fini+0x57/0xb0 [radeon]
[    8.340083] EAX: 00000000 EBX: f709e000 ECX: ffff8000 EDX: f90c9120
[    8.340083] ESI: 00000000 EDI: 00000e40 EBP: f6a0dda0 ESP: f6a0dd8c
[    8.340083]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    8.340083] Process modprobe (pid: 1187, ti=f6a0c000 task=f6b8ab20 task.ti=f6a0c000)
[    8.340083] Stack:
[    8.340083]  f8e1821c f6a0dda0 f709e000 f663f000 00800005 f6a0ddac f9065760 f709e000
[    8.340083] <0> f6a0ddbc f902e293 f90b84bc f709e000 f6a0ddcc f902f3dc f663f000 f7125260
[    8.340083] <0> f6a0ddfc f902f517 f90b86dc f90c0c70 f7125260 fffffff4 0000003f 00000001
[    8.340083] Call Trace:
[    8.340083]  [<f9065760>] ? r100_fini+0x10/0x70 [radeon]
[    8.340083]  [<f902e293>] ? radeon_device_fini+0x33/0x80 [radeon]
[    8.340083]  [<f902f3dc>] ? radeon_driver_unload_kms+0x2c/0x50 [radeon]
[    8.340083]  [<f902f517>] ? radeon_driver_load_kms+0x117/0x1b0 [radeon]
[    8.340083]  [<f8d1f82c>] ? drm_get_dev+0x2ac/0x490 [drm]
[    8.340083]  [<f90a99f2>] ? radeon_pci_probe+0x12/0x14 [radeon]
[    8.340083]  [<c14e974e>] ? pci_device_probe+0x5e/0x80
[    8.340083]  [<c1561fdf>] ? driver_probe_device+0x7f/0x190
[    8.340083]  [<c14e914b>] ? pci_match_device+0xab/0xc0
[    8.340083]  [<c1562171>] ? __driver_attach+0x81/0x90
[    8.340083]  [<c1561199>] ? bus_for_each_dev+0x49/0x70
[    8.340083]  [<c1561d0e>] ? driver_attach+0x1e/0x20
[    8.340083]  [<c15620f0>] ? __driver_attach+0x0/0x90
[    8.340083]  [<c15618c2>] ? bus_add_driver+0xc2/0x2c0
[    8.340083]  [<c14e9690>] ? pci_device_remove+0x0/0x40
[    8.340083]  [<c15623a6>] ? driver_register+0x66/0x110
[    8.340083]  [<c14e9975>] ? __pci_register_driver+0x45/0xb0
[    8.340083]  [<f8d1a7c1>] ? drm_init+0xf1/0x100 [drm]
[    8.340083]  [<f91a10b7>] ? radeon_init+0xb7/0xb9 [radeon]
[    8.340083]  [<c1001242>] ? do_one_initcall+0x32/0x190
[    8.340083]  [<f91a1000>] ? radeon_init+0x0/0xb9 [radeon]
[    8.340083]  [<c1074ba3>] ? sys_init_module+0x93/0x1d0
[    8.340083]  [<c10f20c2>] ? sys_write+0x42/0x70
[    8.340083]  [<c199ac6c>] ? syscall_call+0x7/0xb
[    8.340083] Code: a9 00 00 01 00 74 36 b8 c7 10 00 00 83 c6 01 e8 a0 37 47 c8 3b 73 6c 73 4b 81 bb 90 00 00 00 40 0e 00 00 77 cf 8b 83 94 00 00 00 <89> 38 8b 83 94 00 00 00 8b 40 04 a9 00 00 01 00 75 ca 89 d8 e8 
[    8.340083] EIP: [<f905f797>] r100_cp_fini+0x57/0xb0 [radeon] SS:ESP 0068:f6a0dd8c
[    8.340083] CR2: 0000000000000000
[    8.457876] ---[ end trace 7d61458dad6b2dff ]---
[  125.620673] lp0: using parport0 (interrupt-driven).
[  125.628435] lp0: console ready
[  427.840486] REISERFS (device sdb2): found reiserfs format "3.6" with standard journal
[  427.840535] REISERFS (device sdb2): using ordered data mode
[  427.850348] REISERFS (device sdb2): journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[  427.853365] REISERFS (device sdb2): checking transaction log (sdb2)
[  427.902591] REISERFS (device sdb2): Using r5 hash to sort names
Stanislaw Gruszka - Feb. 14, 2011, 5:31 p.m.
On Sun, Feb 13, 2011 at 06:50:02PM -0800, Russell Whitaker wrote:
> Ok, you are right. Somewhat started over and now got a saved "dmesg"
> with the newer kernel. Copy of dmesg attached.
> 
> Background info:
>   motherboard: Tyan Tiger MPX, 2 AMD cpu's
>   software: Slackware-current 2/14/2011, "A" series
>             Selected Huge-SMP kernel
> 

There are mtd and radeon oopses in dmesg. There is no indication
that could be caused by ATA. MTD is already fixed in linux-next,
regarding radeon CCing on dri-devel mailing list.

Stanislaw

> [    0.139723] pci 0000:03:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
> [    0.139745] pci 0000:03:08.0: supports D1 D2
> [    0.139749] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.139755] pci 0000:03:08.0: PME# disabled
> [    0.139793] pci 0000:00:10.0: PCI bridge to [bus 03-03]
> [    0.139867] pci 0000:00:10.0:   bridge window [io  0x3000-0x3fff]
> [    0.139873] pci 0000:00:10.0:   bridge window [mem 0xe8200000-0xe82fffff]
> [    0.139879] pci 0000:00:10.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [    0.139892] pci_bus 0000:00: on NUMA node 0
> [    0.139899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.140058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> [    0.140136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT]
> [    0.144214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11)
> [    0.145407] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *0, disabled.
> [    0.145936] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11)
> [    0.146434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11)
> [    0.146781] HEST: Table is not found!
> [    0.147132] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
> [    0.147136] vgaarb: loaded
> [    0.147379] SCSI subsystem initialized
> [    0.148118] libata version 3.00 loaded.
> [    0.148118] usbcore: registered new interface driver usbfs
> [    0.148139] usbcore: registered new interface driver hub
> [    0.149059] usbcore: registered new device driver usb
> [    0.166966] raid6: int32x1    707 MB/s
> [    0.184004] raid6: int32x2    628 MB/s
> [    0.201050] raid6: int32x4    511 MB/s
> [    0.218015] raid6: int32x8    496 MB/s
> [    0.234951] raid6: mmxx1     1320 MB/s
> [    0.251958] raid6: mmxx2     2156 MB/s
> [    0.269013] raid6: sse1x1     460 MB/s
> [    0.285969] raid6: sse1x2     917 MB/s
> [    0.286002] raid6: using algorithm sse1x2 (917 MB/s)
> [    0.286091] PCI: Using ACPI for IRQ routing
> [    0.286168] PCI: pci_cache_line_size set to 32 bytes
> [    0.286243] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
> [    0.286250] reserve RAM buffer: 000000009fef0000 - 000000009fffffff 
> [    0.286255] reserve RAM buffer: 000000009ff80000 - 000000009fffffff 
> [    0.293067] pnp: PnP ACPI init
> [    0.293192] ACPI: bus type pnp registered
> [    0.299162] pnp: PnP ACPI: found 13 devices
> [    0.299162] ACPI: ACPI bus type pnp unregistered
> [    0.299185] system 00:00: [mem 0xfffc0000-0xffffffff] has been reserved
> [    0.299261] system 00:00: [mem 0xffc00000-0xfff7ffff] has been reserved
> [    0.299336] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> [    0.299411] system 00:00: [mem 0x00100000-0x9fffffff] could not be reserved
> [    0.299485] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
> [    0.299568] system 00:06: [io  0x04d0-0x04d1] has been reserved
> [    0.343429] Switching to clocksource acpi_pm
> [    0.343612] pci 0000:00:10.0: BAR 9: assigned [mem 0xa0000000-0xa00fffff pref]
> [    0.343721] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8040000-0xe805ffff pref]
> [    0.343828] pci 0000:01:05.1: PCI bridge to [bus 02-02]
> [    0.343900] pci 0000:01:05.1:   bridge window [io  disabled]
> [    0.343978] pci 0000:01:05.1:   bridge window [mem 0xe8100000-0xe81fffff]
> [    0.343999] pci 0000:01:05.1:   bridge window [mem pref disabled]
> [    0.343999] pci 0000:00:01.0: PCI bridge to [bus 01-02]
> [    0.343999] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
> [    0.343999] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe81fffff]
> [    0.343999] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
> [    0.343999] pci 0000:03:08.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
> [    0.344051] pci 0000:00:10.0: PCI bridge to [bus 03-03]
> [    0.344123] pci 0000:00:10.0:   bridge window [io  0x3000-0x3fff]
> [    0.344198] pci 0000:00:10.0:   bridge window [mem 0xe8200000-0xe82fffff]
> [    0.344286] pci 0000:00:10.0:   bridge window [mem 0xa0000000-0xa00fffff pref]
> [    0.344422] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
> [    0.344426] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
> [    0.344431] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
> [    0.344435] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe81fffff]
> [    0.344439] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
> [    0.344444] pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe81fffff]
> [    0.344448] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
> [    0.344452] pci_bus 0000:03: resource 1 [mem 0xe8200000-0xe82fffff]
> [    0.344456] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa00fffff pref]
> [    0.344538] NET: Registered protocol family 2
> [    0.344696] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [    0.345309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [    0.348005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [    0.349385] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.349464] TCP reno registered
> [    0.349540] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [    0.349650] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [    0.349962] NET: Registered protocol family 1
> [    0.350235] RPC: Registered udp transport module.
> [    0.350318] RPC: Registered tcp transport module.
> [    0.350388] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.350479] pci 0000:00:00.0: BIOS failed to enable PCI standards compliance; fixing this error
> [    0.350613] pci 0000:01:05.0: Boot video device
> [    0.350671] PCI: CLS 64 bytes, default 32
> [    0.353746] audit: initializing netlink socket (disabled)
> [    0.353850] type=2000 audit(1297557217.353:1): initialized
> [    0.354320] highmem bounce pool size: 64 pages
> [    0.361087] VFS: Disk quotas dquot_6.5.2
> [    0.361328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    0.362055] DLM (built Feb  7 2011 23:48:44) installed
> [    0.364709] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [    0.365518] NTFS driver 2.1.29 [Flags: R/W].
> [    0.365880] ROMFS MTD (C) 2007 Red Hat, Inc.
> [    0.366491] JFS: nTxBlock = 8192, nTxLock = 65536
> [    0.376470] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
> [    0.378105] SGI XFS Quota Management subsystem
> [    0.378185] OCFS2 1.5.0
> [    0.378740] ocfs2: Registered cluster interface o2cb
> [    0.379021] ocfs2: Registered cluster interface user
> [    0.379094] OCFS2 DLMFS 1.5.0
> [    0.379391] OCFS2 User DLM kernel interface loaded
> [    0.379464] OCFS2 Node Manager 1.5.0
> [    0.379841] OCFS2 DLM 1.5.0
> [    0.380557] Btrfs loaded
> [    0.381869] Slow work thread pool: Starting up
> [    0.382054] Slow work thread pool: Ready
> [    0.382138] GFS2 (built Feb  7 2011 23:49:10) installed
> [    0.382233] msgmni has been set to 1679
> [    0.382724] alg: No test for cipher_null (cipher_null-generic)
> [    0.382884] alg: No test for ecb(cipher_null) (ecb-cipher_null)
> [    0.383077] alg: No test for digest_null (digest_null-generic)
> [    0.383216] alg: No test for compress_null (compress_null-generic)
> [    0.385396] alg: No test for fcrypt (fcrypt-generic)
> [    0.389574] alg: No test for stdrng (krng)
> [    0.389668] async_tx: api initialized (async)
> [    0.390025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
> [    0.390134] io scheduler noop registered
> [    0.390203] io scheduler deadline registered
> [    0.390360] io scheduler cfq registered (default)
> [    0.390976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    0.391787] ERST: Table is not found!
> [    0.391871] isapnp: Scanning for PnP cards...
> [    0.748787] isapnp: No Plug & Play device found
> [    0.757359] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    1.002192] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    1.246191] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [    1.247234] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    1.247674] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [    1.248513] Floppy drive(s): fd0 is 1.44M
> [    1.262829] FDC 0 is a post-1991 82077
> [    1.268840] brd: module loaded
> [    1.271293] loop: module loaded
> [    1.271365] Compaq SMART2 Driver (v 2.6.0)
> [    1.271671] HP CISS Driver (v 3.6.20)
> [    1.273808] Loading iSCSI transport class v2.0-870.
> [    1.275357] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
> [    1.279698] Adaptec aacraid driver 1.1-5[26400]-ms
> [    1.280141] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
> [    1.280789] scsi: <fdomain> Detection failed (no card)
> [    1.280883] sym53c416.c: Version 1.0.0-ac
> [    1.280978] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
> [    1.281192] QLogic Fibre Channel HBA Driver: 8.03.02-k2
> [    1.281586] iscsi: registered transport (qla4xxx)
> [    1.281763] QLogic iSCSI HBA Driver
> [    1.281832] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
> [    1.281904] Copyright(c) 2004-2009 Emulex.  All rights reserved.
> [    1.282109] Brocade BFA FC/FCOE SCSI driver - version: 2.1.2.1
> [    1.304056] Failed initialization of WD-7000 SCSI card!
> [    1.355584] DC390: clustering now enabled by default. If you get problems load
> [    1.355690]        with "disable_clustering=1" and report to maintainers
> [    1.355997] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> [    1.356318] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
> [    1.356498] megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
> [    1.356688] mpt2sas version 05.100.00.02 loaded
> [    1.357115] GDT-HA: Storage RAID Controller Driver. Version: 3.05
> [    1.357492] 3ware Storage Controller device driver for Linux v1.26.02.003.
> [    1.357665] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
> [    1.357884] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
> [    1.358101] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
> [    1.358325] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
> [    1.358500] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
> [    1.359002] st: Version 20081215, fixed bufsize 32768, s/g segs 256
> [    1.361769] pata_amd 0000:00:07.1: version 0.4.1
> [    1.361889] pata_amd 0000:00:07.1: setting latency timer to 64
> [    1.362137] scsi2 : pata_amd
> [    1.362621] scsi3 : pata_amd
> [    1.362921] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
> [    1.362998] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
> [    1.368001] I2O subsystem v1.325
> [    1.368077] i2o: max drivers = 8
> [    1.368591] I2O Configuration OSM v1.323
> [    1.368753] I2O Bus Adapter OSM v1.317
> [    1.368917] I2O Block Device OSM v1.325
> [    1.369448] I2O SCSI Peripheral OSM v1.316
> [    1.369614] I2O ProcFS OSM v1.316
> [    1.369799] Fusion MPT base driver 3.04.15
> [    1.369869] Copyright (c) 1999-2008 LSI Corporation
> [    1.369946] Fusion MPT SPI Host driver 3.04.15
> [    1.370139] Fusion MPT FC Host driver 3.04.15
> [    1.370345] Fusion MPT SAS Host driver 3.04.15
> [    1.370534] Fusion MPT misc device (ioctl) driver 3.04.15
> [    1.370828] mptctl: Registered with Fusion MPT base driver
> [    1.370902] mptctl: /dev/mptctl @ (major,minor=10,220)
> [    1.370975] Fusion MPT LAN driver 3.04.15
> [    1.371345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    1.371642] 116x: driver isp116x-hcd, 03 Nov 2005
> [    1.371809] driver isp1362-hcd, 2005-04-04
> [    1.371978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    1.372105] ohci_hcd 0000:03:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [    1.372218] ohci_hcd 0000:03:00.0: OHCI Host Controller
> [    1.372499] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
> [    1.372663] ohci_hcd 0000:03:00.0: irq 19, io mem 0xe8200000
> [    1.425088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [    1.425164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.425279] usb usb1: Product: OHCI Host Controller
> [    1.425349] usb usb1: Manufacturer: Linux 2.6.35.11-smp ohci_hcd
> [    1.425422] usb usb1: SerialNumber: 0000:03:00.0
> [    1.425844] hub 1-0:1.0: USB hub found
> [    1.425926] hub 1-0:1.0: 4 ports detected
> [    1.427119] uhci_hcd: USB Universal Host Controller Interface driver
> [    1.427546] sl811: driver sl811-hcd, 19 May 2005
> [    1.427720] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
> [    1.428211] Initializing USB Mass Storage driver...
> [    1.428417] usbcore: registered new interface driver usb-storage
> [    1.428490] USB Mass Storage support registered.
> [    1.428658] usbcore: registered new interface driver ums-alauda
> [    1.428829] usbcore: registered new interface driver ums-cypress
> [    1.429008] usbcore: registered new interface driver ums-datafab
> [    1.429182] usbcore: registered new interface driver ums-freecom
> [    1.429367] usbcore: registered new interface driver ums-isd200
> [    1.429538] usbcore: registered new interface driver ums-jumpshot
> [    1.429708] usbcore: registered new interface driver ums-karma
> [    1.429875] usbcore: registered new interface driver ums-onetouch
> [    1.430058] usbcore: registered new interface driver ums-sddr09
> [    1.430226] usbcore: registered new interface driver ums-sddr55
> [    1.430407] usbcore: registered new interface driver ums-usbat
> [    1.430741] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [    1.433307] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    1.433387] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    1.434022] mice: PS/2 mouse device common for all mice
> [    1.434208] md: linear personality registered for level -1
> [    1.434294] md: raid0 personality registered for level 0
> [    1.434365] md: raid1 personality registered for level 1
> [    1.434437] md: raid10 personality registered for level 10
> [    1.434508] md: raid6 personality registered for level 6
> [    1.434579] md: raid5 personality registered for level 5
> [    1.434649] md: raid4 personality registered for level 4
> [    1.434720] md: multipath personality registered for level -4
> [    1.435236] device-mapper: uevent: version 1.0.3
> [    1.435689] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
> [    1.436095] cpuidle: using governor ladder
> [    1.436166] cpuidle: using governor menu
> [    1.436374] TCP cubic registered
> [    1.436443] Initializing XFRM netlink socket
> [    1.436531] NET: Registered protocol family 17
> [    1.436664] Using IPI No-Shortcut mode
> [    1.455007] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [    1.536507] ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100
> [    1.536580] ata1.00: 78165360 sectors, multi 16: LBA 
> [    1.537136] ata1.01: ATA-6: ST3160023A, 8.01, max UDMA/100
> [    1.537209] ata1.01: 312581808 sectors, multi 16: LBA48 
> [    1.559418] ata1.00: configured for UDMA/100
> [    1.565425] ata1.01: configured for UDMA/100
> [    1.565821] scsi 2:0:0:0: Direct-Access     ATA      ST340810A        3.39 PQ: 0 ANSI: 5
> [    1.566676] sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
> [    1.566875] sd 2:0:0:0: [sda] Write Protect is off
> [    1.566948] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    1.566989] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    1.567691] scsi 2:0:1:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
> [    1.568192]  sda: sda1 sda2 sda3
> [    1.602752] sd 2:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
> [    1.602834] sd 2:0:1:0: [sdb] Write Protect is off
> [    1.602840] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> [    1.602874] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    1.603127]  sda4
> [    1.603766]  sdb: sdb1 sdb2
> [    1.621363] sd 2:0:0:0: [sda] Attached SCSI disk
> [    1.622065] sd 2:0:1:0: [sdb] Attached SCSI disk
> [    1.757277] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL0C, max UDMA/66
> [    1.757389] ata2.01: ATAPI: MATSHITA CD-RW CW-7586, 1.08, max MWDMA2
> [    1.757490] ata2.00: limited to UDMA/33 due to 40-wire cable
> [    1.779199] ata2.00: configured for UDMA/33
> [    1.801291] ata2.01: configured for MWDMA2
> [    1.803830] scsi 3:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL0C PQ: 0 ANSI: 5
> [    1.809492] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [    1.809605] Uniform CD-ROM driver Revision: 3.20
> [    1.810132] sr 3:0:0:0: Attached scsi CD-ROM sr0
> [    1.812240] scsi 3:0:1:0: CD-ROM            MATSHITA CD-RW  CW-7586   1.08 PQ: 0 ANSI: 5
> [    1.815522] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> [    1.815999] sr 3:0:1:0: Attached scsi CD-ROM sr1
> [    1.816404] registered taskstats version 1
> [    1.816914] md: Waiting for all devices to be available before autodetect
> [    1.816988] md: If you don't use raid, use raid=noautodetect
> [    1.817565] md: Autodetecting RAID arrays.
> [    1.817636] md: Scanned 0 and added 0 devices.
> [    1.817705] md: autorun ...
> [    1.817771] md: ... autorun DONE.
> [    1.844852] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
> [    1.844981] REISERFS (device sda4): using ordered data mode
> [    1.857852] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> [    1.860813] REISERFS (device sda4): checking transaction log (sda4)
> [    1.882303] REISERFS (device sda4): Using r5 hash to sort names
> [    1.882441] VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
> [    1.882564] devtmpfs: mounted
> [    1.882692] Freeing unused kernel memory: 604k freed
> [    1.884105] Write protecting the kernel text: 9844k
> [    1.884264] Write protecting the kernel read-only data: 2516k
> [    3.595785] udev[1085]: starting version 165
> [    4.081211] sd 2:0:0:0: Attached scsi generic sg0 type 0
> [    4.081404] sd 2:0:1:0: Attached scsi generic sg1 type 0
> [    4.081534] sr 3:0:0:0: Attached scsi generic sg2 type 5
> [    4.081658] sr 3:0:1:0: Attached scsi generic sg3 type 5
> [    4.167844] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 700d ss_vid 0 ss_did 0
> [    4.167966] shpchp 0000:00:01.0: Cannot reserve MMIO region
> [    4.168061] shpchp 0000:00:10.0: HPC vendor_id 1022 device_id 7448 ss_vid 0 ss_did 0
> [    4.168166] shpchp 0000:00:10.0: Cannot reserve MMIO region
> [    4.168475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [    4.755831] 3c59x 0000:03:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> [    4.755955] 3c59x: Donald Becker and others.
> [    4.756039] 0000:03:08.0: 3Com PCI 3c905C Tornado at f869e400.
> [    5.049204] AMD768 RNG detected
> [    5.222363] cfg80211: Calling CRDA to update world regulatory domain
> [    5.602235] Linux agpgart interface v0.103
> [    5.723667] "amd76xrom" amd76xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
> [    5.747579] agpgart-amdk7 0000:00:00.0: AMD 760MP chipset
> [    5.767140] agpgart-amdk7 0000:00:00.0: AGP aperture is 64M @ 0xec000000
> [    6.015708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [    6.016246] ACPI: Power Button [PWRB]
> [    6.016541] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [    6.016781] ACPI: Power Button [PWRF]
> [    6.016985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
> [    6.017184] ACPI: Sleep Button [SLPF]
> [    6.352765] ACPI: acpi_idle registered with cpuidle
> [    6.477116] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [    6.477249] rtc0: alarms up to one month, y3k, 242 bytes nvram
> [    6.653728] CA0106 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [    6.653882] snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
> [    6.832982] [drm] Initialized drm 1.1.0 20060810
> [    7.717906] BUG: unable to handle kernel paging request at f8c8aaa0
> [    7.718009] IP: [<c14d38cf>] memcpy+0x1f/0x40
> [    7.718009] *pde = 36b3f067 *pte = 00000000 
> [    7.718009] Oops: 0002 [#1] SMP 
> [    7.718009] last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host2/target2:0:0/2:0:0:0/block/sda/removable
> [    7.718009] Modules linked in: jedec_probe parport drm snd_ca0106 mac80211 snd_rawmidi snd_seq_device rtc_cmos rtc_core eeprom_93cx6 processor cfi_probe thermal container gen_probe thermal_sys cfi_util rtc_lib button snd_ac97_codec ac97_bus snd_pcm snd_timer amd_k7_agp amd76xrom(+) hwmon agpgart mtd snd soundcore cfg80211 i2c_algo_bit i2c_amd756 amd_rng rfkill snd_page_alloc i2c_core chipreg 3c59x map_funcs mii evdev psmouse shpchp sg serio_raw
> [    7.718009] 
> [    7.718009] Pid: 1124, comm: modprobe Not tainted 2.6.35.11-smp #2 S2466 TIGER MPX/Unknown
> [    7.718009] EIP: 0060:[<c14d38cf>] EFLAGS: 00010212 CPU: 0
> [    7.718009] EIP is at memcpy+0x1f/0x40
> [    7.718009] EAX: f8c8aaa0 EBX: 00000020 ECX: 00000008 EDX: f6aaba48
> [    7.718009] ESI: f6aaba48 EDI: f8c8aaa0 EBP: f6aaba40 ESP: f6aaba34
> [    7.718009]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [    7.718009] Process modprobe (pid: 1124, ti=f6aaa000 task=f6aa0cf0 task.ti=f6aaa000)
> [    7.718009] Stack:
> [    7.718009]  000000aa 000aaaa0 f8be0000 f6aaba74 f867f0f3 000000aa 000000aa 000000aa
> [    7.718009] <0> 000000aa 000000aa 000000aa 000000aa 000000aa 00000008 f6aabb84 f6aaba9c
> [    7.718009] <0> f6aabd90 f86a2aec 000000aa 000000aa 000000aa 000000aa 000000aa 000000aa
> [    7.718009] Call Trace:
> [    7.718009]  [<f867f0f3>] ? simple_map_write+0x83/0xa0 [map_funcs]
> [    7.718009]  [<f86a2aec>] ? cfi_qry_mode_on+0xc7c/0x1130 [cfi_util]
> [    7.718009]  [<f8d67eac>] ? jedec_probe_chip+0x71c/0x13a8 [jedec_probe]
> [    7.718009]  [<f87061f6>] ? cfi_probe_chip+0x46/0x494 [cfi_probe]
> [    7.718009]  [<f86ce1b2>] ? mtd_do_chip_probe+0xb2/0x398 [gen_probe]
> [    7.718009]  [<c10254d0>] ? do_page_fault+0x0/0x370
> [    7.718009]  [<f8706012>] ? cfi_probe+0x12/0x20 [cfi_probe]
> [    7.718009]  [<f8697199>] ? do_map_probe+0x29/0x7b [chipreg]
> [    7.718009]  [<f881a261>] ? init_amd76xrom+0x261/0x419 [amd76xrom]
> [    7.718009]  [<c1001242>] ? do_one_initcall+0x32/0x190
> [    7.718009]  [<f881a000>] ? init_amd76xrom+0x0/0x419 [amd76xrom]
> [    7.718009]  [<c1074ba3>] ? sys_init_module+0x93/0x1d0
> [    7.718009]  [<c10f20c2>] ? sys_write+0x42/0x70
> [    7.718009]  [<c199ac6c>] ? syscall_call+0x7/0xb
> [    7.718009] Code: 8d 74 26 00 e8 63 fd ff ff eb e8 90 55 89 e5 83 ec 0c 89 1c 24 89 74 24 04 89 7c 24 08 0f 1f 44 00 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 1c 24 8b 74 24 04 8b 7c 24 
> [    7.718009] EIP: [<c14d38cf>] memcpy+0x1f/0x40 SS:ESP 0068:f6aaba34
> [    7.718009] CR2: 00000000f8c8aaa0
> [    7.718009] ---[ end trace 7d61458dad6b2dfe ]---
> [    7.744480] parport_pc 00:0b: reported by Plug and Play ACPI
> [    7.744688] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> [    7.816274] ppdev: user-space parallel port driver
> [    7.858206] rtl8180 0000:03:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [    8.033163] [drm] radeon defaulting to kernel modesetting.
> [    8.033250] [drm] radeon kernel modesetting enabled.
> [    8.033478] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [    8.040981] [drm] initializing kernel modesetting (R200 0x1002:0x4242).
> [    8.041329] [drm] register mmio base: 0xE8020000
> [    8.041401] [drm] register mmio size: 131072
> [    8.041836] agpgart-amdk7 0000:00:00.0: AGP 2.0 bridge
> [    8.041928] agpgart-amdk7 0000:00:00.0: putting AGP V2 device into 4x mode
> [    8.042043] radeon 0000:01:05.0: putting AGP V2 device into 4x mode
> [    8.042150] radeon 0000:01:05.0: GTT: 64M 0xEC000000 - 0xEFFFFFFF
> [    8.042228] [drm] Generation 1 PCI interface in multifunction mode
> [    8.042301] [drm] Limiting VRAM to one aperture
> [    8.042376] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)
> [    8.042546] [drm] radeon: irq initialized.
> [    8.048780] [drm] Detected VRAM RAM=128M, BAR=128M
> [    8.048868] [drm] RAM width 128bits DDR
> [    8.049191] [TTM] Zone  kernel: Available graphics memory: 430268 kiB.
> [    8.049268] [TTM] Zone highmem: Available graphics memory: 1286048 kiB.
> [    8.049342] [TTM] Initializing pool allocator.
> [    8.049464] [drm] radeon: 64M of VRAM memory ready
> [    8.049536] [drm] radeon: 64M of GTT memory ready.
> [    8.050824] [drm] Loading R200 Microcode
> [    8.054340] phy0: Selected rate control algorithm 'minstrel'
> [    8.054727] phy0: hwaddr 08:10:74:a6:8b:ad, RTL8185vD + rtl8225z2
> [    8.092368] [TTM] AGP Bind memory failed.
> [    8.092457] [TTM] Couldn't bind backend.
> [    8.092561] radeon 0000:01:05.0: object_init failed for (1048576, 0x00000002)
> [    8.092638] radeon 0000:01:05.0: (-22) ring create failed
> [    8.092711] radeon 0000:01:05.0: failled initializing CP (-22).
> [    8.092784] radeon 0000:01:05.0: Disabling GPU acceleration
> [    8.092860] [drm] radeon: cp finalized
> [    8.092960] [drm] radeon: cp finalized
> [    8.093109] [TTM] Finalizing pool allocator.
> [    8.094065] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
> [    8.094141] [TTM] Zone highmem: Used memory at exit: 0 kiB.
> [    8.094214] [drm] radeon: ttm finalized
> [    8.094290] [drm] Forcing AGP to PCI mode
> [    8.094722] [drm] Generation 1 PCI interface in multifunction mode
> [    8.094796] [drm] Limiting VRAM to one aperture
> [    8.094871] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)
> [    8.094976] radeon 0000:01:05.0: GTT: 512M 0xD0000000 - 0xEFFFFFFF
> [    8.095103] [drm] radeon: irq initialized.
> [    8.095183] [drm] Detected VRAM RAM=128M, BAR=128M
> [    8.095254] [drm] RAM width 128bits DDR
> [    8.095479] [TTM] Zone  kernel: Available graphics memory: 430268 kiB.
> [    8.095554] [TTM] Zone highmem: Available graphics memory: 1286048 kiB.
> [    8.095628] [TTM] Initializing pool allocator.
> [    8.095742] [drm] radeon: 64M of VRAM memory ready
> [    8.095814] [drm] radeon: 512M of GTT memory ready.
> [    8.095897] [drm] GART: num cpu pages 131072, num gpu pages 131072
> [    8.104896] [drm] radeon: ring at 0x00000000D0000000
> [    8.105038] [drm] ring test succeeded in 7 usecs
> [    8.105283] [drm] radeon: ib pool ready.
> [    8.105546] [drm] ib test succeeded in 0 usecs
> [    8.105705] [drm] DFP table revision: 3
> [    8.106512] [drm] Radeon Display Connectors
> [    8.106590] [drm] Connector 0:
> [    8.106658] [drm]   DVI-I
> [    8.106725] [drm]   HPD1
> [    8.106793] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
> [    8.106864] [drm]   Encoders:
> [    8.106933] [drm]     CRT1: INTERNAL_DAC1
> [    8.107020] [drm]     DFP1: INTERNAL_TMDS1
> [    8.238330] [drm] fb mappable at 0xF0040000
> [    8.238402] [drm] vram apper at 0xF0000000
> [    8.238471] [drm] size 5242880
> [    8.238538] [drm] fb depth is 24
> [    8.238605] [drm]    pitch is 5120
> [    8.311302] Console: switching to colour frame buffer device 160x64
> [    8.331774] fb0: radeondrmfb frame buffer device
> [    8.331885] drm: registered panic notifier
> [    8.331998] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
> [    8.338722] [drm] initializing kernel modesetting (R200 0x1002:0x4243).
> [    8.339111] radeon 0000:01:05.1: Fatal error during GPU init
> [    8.339251] [drm] radeon: finishing device.
> [    8.339355] [TTM] Memory type 2 has not been initialized.
> [    8.339519] BUG: unable to handle kernel NULL pointer dereference at (null)
> [    8.339701] IP: [<f905f797>] r100_cp_fini+0x57/0xb0 [radeon]
> [    8.339970] *pde = 00000000 
> [    8.340049] Oops: 0002 [#2] SMP 
> [    8.340083] last sysfs file: /sys/devices/virtual/vtconsole/vtcon1/uevent
> [    8.340083] Modules linked in: radeon(+) ttm rtl8180 ppdev drm_kms_helper parport_pc jedec_probe parport drm snd_ca0106 mac80211 snd_rawmidi snd_seq_device rtc_cmos rtc_core eeprom_93cx6 processor cfi_probe thermal container gen_probe thermal_sys cfi_util rtc_lib button snd_ac97_codec ac97_bus snd_pcm snd_timer amd_k7_agp amd76xrom(+) hwmon agpgart mtd snd soundcore cfg80211 i2c_algo_bit i2c_amd756 amd_rng rfkill snd_page_alloc i2c_core chipreg 3c59x map_funcs mii evdev psmouse shpchp sg serio_raw
> [    8.340083] 
> [    8.340083] Pid: 1187, comm: modprobe Tainted: G      D     2.6.35.11-smp #2 S2466 TIGER MPX/Unknown
> [    8.340083] EIP: 0060:[<f905f797>] EFLAGS: 00010287 CPU: 0
> [    8.340083] EIP is at r100_cp_fini+0x57/0xb0 [radeon]
> [    8.340083] EAX: 00000000 EBX: f709e000 ECX: ffff8000 EDX: f90c9120
> [    8.340083] ESI: 00000000 EDI: 00000e40 EBP: f6a0dda0 ESP: f6a0dd8c
> [    8.340083]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [    8.340083] Process modprobe (pid: 1187, ti=f6a0c000 task=f6b8ab20 task.ti=f6a0c000)
> [    8.340083] Stack:
> [    8.340083]  f8e1821c f6a0dda0 f709e000 f663f000 00800005 f6a0ddac f9065760 f709e000
> [    8.340083] <0> f6a0ddbc f902e293 f90b84bc f709e000 f6a0ddcc f902f3dc f663f000 f7125260
> [    8.340083] <0> f6a0ddfc f902f517 f90b86dc f90c0c70 f7125260 fffffff4 0000003f 00000001
> [    8.340083] Call Trace:
> [    8.340083]  [<f9065760>] ? r100_fini+0x10/0x70 [radeon]
> [    8.340083]  [<f902e293>] ? radeon_device_fini+0x33/0x80 [radeon]
> [    8.340083]  [<f902f3dc>] ? radeon_driver_unload_kms+0x2c/0x50 [radeon]
> [    8.340083]  [<f902f517>] ? radeon_driver_load_kms+0x117/0x1b0 [radeon]
> [    8.340083]  [<f8d1f82c>] ? drm_get_dev+0x2ac/0x490 [drm]
> [    8.340083]  [<f90a99f2>] ? radeon_pci_probe+0x12/0x14 [radeon]
> [    8.340083]  [<c14e974e>] ? pci_device_probe+0x5e/0x80
> [    8.340083]  [<c1561fdf>] ? driver_probe_device+0x7f/0x190
> [    8.340083]  [<c14e914b>] ? pci_match_device+0xab/0xc0
> [    8.340083]  [<c1562171>] ? __driver_attach+0x81/0x90
> [    8.340083]  [<c1561199>] ? bus_for_each_dev+0x49/0x70
> [    8.340083]  [<c1561d0e>] ? driver_attach+0x1e/0x20
> [    8.340083]  [<c15620f0>] ? __driver_attach+0x0/0x90
> [    8.340083]  [<c15618c2>] ? bus_add_driver+0xc2/0x2c0
> [    8.340083]  [<c14e9690>] ? pci_device_remove+0x0/0x40
> [    8.340083]  [<c15623a6>] ? driver_register+0x66/0x110
> [    8.340083]  [<c14e9975>] ? __pci_register_driver+0x45/0xb0
> [    8.340083]  [<f8d1a7c1>] ? drm_init+0xf1/0x100 [drm]
> [    8.340083]  [<f91a10b7>] ? radeon_init+0xb7/0xb9 [radeon]
> [    8.340083]  [<c1001242>] ? do_one_initcall+0x32/0x190
> [    8.340083]  [<f91a1000>] ? radeon_init+0x0/0xb9 [radeon]
> [    8.340083]  [<c1074ba3>] ? sys_init_module+0x93/0x1d0
> [    8.340083]  [<c10f20c2>] ? sys_write+0x42/0x70
> [    8.340083]  [<c199ac6c>] ? syscall_call+0x7/0xb
> [    8.340083] Code: a9 00 00 01 00 74 36 b8 c7 10 00 00 83 c6 01 e8 a0 37 47 c8 3b 73 6c 73 4b 81 bb 90 00 00 00 40 0e 00 00 77 cf 8b 83 94 00 00 00 <89> 38 8b 83 94 00 00 00 8b 40 04 a9 00 00 01 00 75 ca 89 d8 e8 
> [    8.340083] EIP: [<f905f797>] r100_cp_fini+0x57/0xb0 [radeon] SS:ESP 0068:f6a0dd8c
> [    8.340083] CR2: 0000000000000000
> [    8.457876] ---[ end trace 7d61458dad6b2dff ]---
> [  125.620673] lp0: using parport0 (interrupt-driven).
> [  125.628435] lp0: console ready
> [  427.840486] REISERFS (device sdb2): found reiserfs format "3.6" with standard journal
> [  427.840535] REISERFS (device sdb2): using ordered data mode
> [  427.850348] REISERFS (device sdb2): journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> [  427.853365] REISERFS (device sdb2): checking transaction log (sdb2)
> [  427.902591] REISERFS (device sdb2): Using r5 hash to sort names

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 19fe92d..370509a 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -154,6 +154,7 @@  static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 			__func__,
 			(unsigned long long)window->rsrc.start,
 			(unsigned long long)window->rsrc.end);
+		return -EBUSY;
 	}