Message ID | 1496733316-9788-3-git-send-email-philipp.tomsich@theobroma-systems.com |
---|---|
State | Accepted |
Commit | 5a403a27b008430d4201bc6ce45c03843df933ee |
Delegated to: | Simon Glass |
Headers | show |
On 6 June 2017 at 01:15, Philipp Tomsich <philipp.tomsich@theobroma-systems.com> wrote: > With HDMI output for the RK3399 working, this update the RK3399-Q7 > (Puma) defconfig for the new functionality: > 1. enables PMIC command (to check if the HDMI voltages are correct) > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > 2. enables video-output (via HDMI) > +CONFIG_DM_VIDEO=y > +CONFIG_DISPLAY=y > +CONFIG_VIDEO_ROCKCHIP=y > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y > 3. turns on the 'dcache'-command (for a dcache flush) for our QA to > fill the framebuffer using 'mw.l' > +CONFIG_CMD_CACHE=y > 4. turns on the 'bmp'-command > +CONFIG_CMD_BMP=y > > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> > Reviewed-by: Simon Glass <sjg@chromium.org> > > --- > > Changes in v3: None > Changes in v2: > - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to > the upstream master after CMD_BMP was migrate to Kconfig) > > configs/puma-rk3399_defconfig | 8 ++++++++ > 1 file changed, 8 insertions(+) Acked-by: Simon Glass <sjg@chromium.org>
On 6 June 2017 at 01:15, Philipp Tomsich <philipp.tomsich@theobroma-systems.com> wrote: > With HDMI output for the RK3399 working, this update the RK3399-Q7 > (Puma) defconfig for the new functionality: > 1. enables PMIC command (to check if the HDMI voltages are correct) > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > 2. enables video-output (via HDMI) > +CONFIG_DM_VIDEO=y > +CONFIG_DISPLAY=y > +CONFIG_VIDEO_ROCKCHIP=y > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y > 3. turns on the 'dcache'-command (for a dcache flush) for our QA to > fill the framebuffer using 'mw.l' > +CONFIG_CMD_CACHE=y > 4. turns on the 'bmp'-command > +CONFIG_CMD_BMP=y > > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> > Reviewed-by: Simon Glass <sjg@chromium.org> > > --- > > Changes in v3: None > Changes in v2: > - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to > the upstream master after CMD_BMP was migrate to Kconfig) > > configs/puma-rk3399_defconfig | 8 ++++++++ > 1 file changed, 8 insertions(+) Acked-by: Simon Glass <sjg@chromium.org> Applied to u-boot-rockchip, thanks!
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 577aa02..52fec39 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -26,7 +26,11 @@ CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_REGMAP=y @@ -74,4 +78,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_ERRNO_STR=y