diff mbox

[9/9] sparc: unify strip command in boot/Makefile

Message ID 1293915632-4596-9-git-send-email-sam@ravnborg.org
State Superseded
Delegated to: David Miller
Headers show

Commit Message

Sam Ravnborg Jan. 1, 2011, 9 p.m. UTC 
Include an additional "Kernel is ready" print for zImage

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/sparc/boot/Makefile |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

Comments

Julian Calaby Jan. 2, 2011, 12:46 a.m. UTC | #1 
On Sun, Jan 2, 2011 at 08:00, Sam Ravnborg <sam@ravnborg.org> wrote:
> Include an additional "Kernel is ready" print for zImage

I was going to ask if this line is necessary, but a quick peek through
the other architectures reveals that most of them print something
along these lines, notable exceptions being "xtensa", "s390",
"powerpc", "mips", "frv" and "blackfin". Blackfin doesn't count
because it seems to be producing files to be fed into some external
utility before sticking it on a board.

Thanks,
diff mbox

Patch

diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index f9d3bf9..a2c5898 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -14,6 +14,8 @@  quiet_cmd_elftoaout	= ELFTOAOUT $@
       cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
 quiet_cmd_piggy		= PIGGY   $@
       cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
+quiet_cmd_strip		= STRIP   $@
+      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@
 
 ifeq ($(CONFIG_SPARC32),y)
 quiet_cmd_btfix		= BTFIX   $@
@@ -22,9 +24,6 @@  quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
-quiet_cmd_strip = STRIP   $@
-      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
-
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -57,6 +56,7 @@  $(obj)/image: $(obj)/btfix.o FORCE
 
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
+	@echo '  kernel: $@ is ready'
 
 $(obj)/btfix.S: $(obj)/btfixupprep vmlinux FORCE
 	$(call if_changed,btfix)
@@ -64,9 +64,6 @@  $(obj)/btfix.S: $(obj)/btfixupprep vmlinux FORCE
 endif
 
 ifeq ($(CONFIG_SPARC64),y)
-quiet_cmd_strip     = STRIP   $@
-      cmd_strip     = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start vmlinux -o $@
-
 
 # Actual linking
 $(obj)/image: vmlinux FORCE
@@ -75,6 +72,7 @@  $(obj)/image: vmlinux FORCE
 
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,gzip)
+	@echo '  kernel: $@ is ready'
 
 $(obj)/vmlinux.aout: vmlinux FORCE
 	$(call if_changed,elftoaout)