diff mbox

[v4,1/6] pinctrl: qcom: Add ipq8074 pinctrl driver

Message ID 1496474875-7190-2-git-send-email-varada@codeaurora.org
State New
Headers show

Commit Message

Varadarajan Narayanan June 3, 2017, 7:27 a.m. UTC
Add initial pinctrl driver to support pin configuration with
pinctrl framework for ipq8074.

Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 .../bindings/pinctrl/qcom,ipq8074-pinctrl.txt      |  172 ++++
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq8074.c             | 1076 ++++++++++++++++++++
 4 files changed, 1259 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c

Comments

Christian Lamparter June 3, 2017, 6:55 p.m. UTC | #1
On Saturday, June 3, 2017 12:57:50 PM CEST Varadarajan Narayanan wrote:
> Add initial pinctrl driver to support pin configuration with
> pinctrl framework for ipq8074.
> 
> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
> +- bias-disable:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as no pull.
> +
> +- bias-pull-down:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as pull down.
> +
> +- bias-pull-up:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as pull up.
> +
> +#define REG_SIZE 0x1000
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
> +	{					        \
> +		.name = "gpio" #id,			\
> +		.pins = gpio##id##_pins,		\
> +		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
> +		.funcs = (int[]){			\
> +			msm_mux_gpio, /* gpio mode */	\
> +			msm_mux_##f1,			\
> +			msm_mux_##f2,			\
> +			msm_mux_##f3,			\
> +			msm_mux_##f4,			\
> +			msm_mux_##f5,			\
> +			msm_mux_##f6,			\
> +			msm_mux_##f7,			\
> +			msm_mux_##f8,			\
> +			msm_mux_##f9			\
> +		},				        \
> +		.nfuncs = 10,				\
> +		.ctl_reg = REG_SIZE * id,		\
> +		.io_reg = 0x4 + REG_SIZE * id,		\
> +		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
> +		.intr_status_reg = 0xc + REG_SIZE * id,	\
> +		.intr_target_reg = 0x8 + REG_SIZE * id,	\
> +		.mux_bit = 2,			\
> +		.pull_bit = 0,			\
> +		.drv_bit = 6,			\
> +		.oe_bit = 9,			\
> +		.in_bit = 0,			\
> +		.out_bit = 1,			\
> +		.intr_enable_bit = 0,		\
> +		.intr_status_bit = 0,		\
> +		.intr_target_bit = 5,		\
> +		.intr_raw_status_bit = 4,	\
> +		.intr_polarity_bit = 1,		\
> +		.intr_detection_bit = 2,	\
> +		.intr_detection_width = 2,	\
> +	}
> +
Hello,

Back in May, Ram Chandra Jangir posted a rather interesting patch on
the LEDE Mailing-List:
<https://www.mail-archive.com/lede-dev@lists.infradead.org/msg07691.html>
|GPIO_PULL bits configurations in TLMM_GPIO_CFG register
|differs for IPQ40xx from rest of the other qcom SoC's.
|This change add support to configure the msm_gpio_pull
|bits for ipq40xx, It is required to fix the proper
|configurations of gpio-pull bits for nand pins mux.
|
|IPQ40xx SoC:
|2'b10: Internal pull up enable.
|2'b11: Unsupport
|
|For other SoC's:
|2'b10: Keeper
|2'b11: Pull-Up

This information wasn't mentioned anywhere. In fact, the special pull-up
configuration was only discovered due to an issue with the qpic NAND on
the Cisco Meraki MR33. So I wonder what does the gpio-pull look like for
the IPQ8074? Is it the same as the IPQ40XX or does it follow the older 
SoCs?

I'm asking this because I'm preparing a modified version of this patch
that will be posted once the IPQ8074 is ready.

Regards,
Christian
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Christian Lamparter June 4, 2017, 12:33 a.m. UTC | #2
On Saturday, June 3, 2017 12:57:50 PM CEST Varadarajan Narayanan wrote:
> +- function:
> +       Usage: required
> +       Value type: <string>
> +       Definition: Specify the alternative function to be configured for the
> +                   specified pins. Functions are only valid for gpio pins.
> +                   Valid values are:
> +                   atest_char, atest_char0, atest_char1, atest_char2,
> +                   atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
> +                   audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
> +                   audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
> +                   blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
> +                   blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
> +                   blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
> +                   blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
> +                   blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1,
> +                   cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en,
> +                   ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0,
> +                   mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc,
> +                   mdio, NA, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk,
> +                   pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync,
> +                   pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1,
> +                   pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
> +                   qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
> +                   qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
> +                   qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
> +                   qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
> +                   qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
> +                   qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b,
> +                   qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a,
> +                   wci2b, wci2c, wci2d, NA

The "NA" function is listed twice. It should be there at all.




--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sricharan Ramabadhran June 5, 2017, 6:23 a.m. UTC | #3
Hi,

On 6/4/2017 12:25 AM, Christian Lamparter wrote:
> On Saturday, June 3, 2017 12:57:50 PM CEST Varadarajan Narayanan wrote:
>> Add initial pinctrl driver to support pin configuration with
>> pinctrl framework for ipq8074.
>>
>> Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
>> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
>> ---
>> +- bias-disable:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as no pull.
>> +
>> +- bias-pull-down:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as pull down.
>> +
>> +- bias-pull-up:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as pull up.
>> +
>> +#define REG_SIZE 0x1000
>> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
>> +	{					        \
>> +		.name = "gpio" #id,			\
>> +		.pins = gpio##id##_pins,		\
>> +		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
>> +		.funcs = (int[]){			\
>> +			msm_mux_gpio, /* gpio mode */	\
>> +			msm_mux_##f1,			\
>> +			msm_mux_##f2,			\
>> +			msm_mux_##f3,			\
>> +			msm_mux_##f4,			\
>> +			msm_mux_##f5,			\
>> +			msm_mux_##f6,			\
>> +			msm_mux_##f7,			\
>> +			msm_mux_##f8,			\
>> +			msm_mux_##f9			\
>> +		},				        \
>> +		.nfuncs = 10,				\
>> +		.ctl_reg = REG_SIZE * id,		\
>> +		.io_reg = 0x4 + REG_SIZE * id,		\
>> +		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
>> +		.intr_status_reg = 0xc + REG_SIZE * id,	\
>> +		.intr_target_reg = 0x8 + REG_SIZE * id,	\
>> +		.mux_bit = 2,			\
>> +		.pull_bit = 0,			\
>> +		.drv_bit = 6,			\
>> +		.oe_bit = 9,			\
>> +		.in_bit = 0,			\
>> +		.out_bit = 1,			\
>> +		.intr_enable_bit = 0,		\
>> +		.intr_status_bit = 0,		\
>> +		.intr_target_bit = 5,		\
>> +		.intr_raw_status_bit = 4,	\
>> +		.intr_polarity_bit = 1,		\
>> +		.intr_detection_bit = 2,	\
>> +		.intr_detection_width = 2,	\
>> +	}
>> +
> Hello,
> 
> Back in May, Ram Chandra Jangir posted a rather interesting patch on
> the LEDE Mailing-List:
> <https://www.mail-archive.com/lede-dev@lists.infradead.org/msg07691.html>
> |GPIO_PULL bits configurations in TLMM_GPIO_CFG register
> |differs for IPQ40xx from rest of the other qcom SoC's.
> |This change add support to configure the msm_gpio_pull
> |bits for ipq40xx, It is required to fix the proper
> |configurations of gpio-pull bits for nand pins mux.
> |
> |IPQ40xx SoC:
> |2'b10: Internal pull up enable.
> |2'b11: Unsupport
> |
> |For other SoC's:
> |2'b10: Keeper
> |2'b11: Pull-Up
> 
> This information wasn't mentioned anywhere. In fact, the special pull-up
> configuration was only discovered due to an issue with the qpic NAND on
> the Cisco Meraki MR33. So I wonder what does the gpio-pull look like for
> the IPQ8074? Is it the same as the IPQ40XX or does it follow the older 
> SoCs?
> 
> I'm asking this because I'm preparing a modified version of this patch
> that will be posted once the IPQ8074 is ready.
> 

IPQ8074 pull configuration bits are same as the older Socs. So IPQ40XX looks to
be the only exception. Having said that, the patch that you pointed out should
be posted on the lists for the kernel then.

Regards,
 Sricharan
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
new file mode 100644
index 0000000..9692b56
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
@@ -0,0 +1,172 @@ 
+Qualcomm Technologies, Inc. IPQ8074 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+IPQ8074 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,ipq8074-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio69
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+		    atest_char, atest_char0, atest_char1, atest_char2,
+		    atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
+		    audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
+		    audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
+		    blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
+		    blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
+		    blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
+		    blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
+		    blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1,
+		    cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en,
+		    ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0,
+		    mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc,
+		    mdio, NA, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk,
+		    pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync,
+		    pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1,
+		    pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
+		    qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+		    qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+		    qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+		    qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
+		    qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+		    qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b,
+		    qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a,
+		    wci2b, wci2c, wci2d, NA
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@1000000 {
+		compatible = "qcom,ipq8074-pinctrl";
+		reg = <0x1000000 0x300000>;
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		uart2: uart2-default {
+			mux {
+				pins = "gpio23", "gpio24";
+				function = "blsp4_uart1";
+			};
+
+			rx {
+				pins = "gpio23";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			tx {
+				pins = "gpio24";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 3ebdc01..9e504db 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -39,6 +39,16 @@  config PINCTRL_IPQ8064
 	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
 	  Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
 
+config PINCTRL_IPQ8074
+	tristate "Qualcomm Technologies, Inc. IPQ8074 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for
+	  the Qualcomm Technologies Inc. TLMM block found on the
+	  Qualcomm Technologies Inc. IPQ8074 platform. Select this for
+	  IPQ8074.
+
 config PINCTRL_MSM8660
 	tristate "Qualcomm 8660 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index ab47764..06c8b2a 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -4,6 +4,7 @@  obj-$(CONFIG_PINCTRL_APQ8064)	+= pinctrl-apq8064.o
 obj-$(CONFIG_PINCTRL_APQ8084)	+= pinctrl-apq8084.o
 obj-$(CONFIG_PINCTRL_IPQ4019)	+= pinctrl-ipq4019.o
 obj-$(CONFIG_PINCTRL_IPQ8064)	+= pinctrl-ipq8064.o
+obj-$(CONFIG_PINCTRL_IPQ8074)	+= pinctrl-ipq8074.o
 obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
 obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
 obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
new file mode 100644
index 0000000..10fb076
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
@@ -0,0 +1,1076 @@ 
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_SIZE * id,		\
+		.io_reg = 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = 0xc + REG_SIZE * id,	\
+		.intr_target_reg = 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+static const struct pinctrl_pin_desc ipq8074_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+
+enum ipq8074_functions {
+	msm_mux_atest_char,
+	msm_mux_atest_char0,
+	msm_mux_atest_char1,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_audio_rxbclk,
+	msm_mux_audio_rxd,
+	msm_mux_audio_rxfsync,
+	msm_mux_audio_rxmclk,
+	msm_mux_audio_txbclk,
+	msm_mux_audio_txd,
+	msm_mux_audio_txfsync,
+	msm_mux_audio_txmclk,
+	msm_mux_blsp0_i2c,
+	msm_mux_blsp0_spi,
+	msm_mux_blsp0_uart,
+	msm_mux_blsp1_i2c,
+	msm_mux_blsp1_spi,
+	msm_mux_blsp1_uart,
+	msm_mux_blsp2_i2c,
+	msm_mux_blsp2_spi,
+	msm_mux_blsp2_uart,
+	msm_mux_blsp3_i2c,
+	msm_mux_blsp3_spi,
+	msm_mux_blsp3_spi0,
+	msm_mux_blsp3_spi1,
+	msm_mux_blsp3_spi2,
+	msm_mux_blsp3_spi3,
+	msm_mux_blsp3_uart,
+	msm_mux_blsp4_i2c0,
+	msm_mux_blsp4_i2c1,
+	msm_mux_blsp4_spi0,
+	msm_mux_blsp4_spi1,
+	msm_mux_blsp4_uart0,
+	msm_mux_blsp4_uart1,
+	msm_mux_blsp5_i2c,
+	msm_mux_blsp5_spi,
+	msm_mux_blsp5_uart,
+	msm_mux_burn0,
+	msm_mux_burn1,
+	msm_mux_cri_trng,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng1,
+	msm_mux_cxc0,
+	msm_mux_cxc1,
+	msm_mux_dbg_out,
+	msm_mux_gcc_plltest,
+	msm_mux_gcc_tlmm,
+	msm_mux_gpio,
+	msm_mux_ldo_en,
+	msm_mux_ldo_update,
+	msm_mux_led0,
+	msm_mux_led1,
+	msm_mux_led2,
+	msm_mux_mac0_sa0,
+	msm_mux_mac0_sa1,
+	msm_mux_mac1_sa0,
+	msm_mux_mac1_sa1,
+	msm_mux_mac1_sa2,
+	msm_mux_mac1_sa3,
+	msm_mux_mac2_sa0,
+	msm_mux_mac2_sa1,
+	msm_mux_mdc,
+	msm_mux_mdio,
+	msm_mux_pcie0_clk,
+	msm_mux_pcie0_rst,
+	msm_mux_pcie0_wake,
+	msm_mux_pcie1_clk,
+	msm_mux_pcie1_rst,
+	msm_mux_pcie1_wake,
+	msm_mux_pcm_drx,
+	msm_mux_pcm_dtx,
+	msm_mux_pcm_fsync,
+	msm_mux_pcm_pclk,
+	msm_mux_pcm_zsi0,
+	msm_mux_pcm_zsi1,
+	msm_mux_prng_rosc,
+	msm_mux_pta1_0,
+	msm_mux_pta1_1,
+	msm_mux_pta1_2,
+	msm_mux_pta2_0,
+	msm_mux_pta2_1,
+	msm_mux_pta2_2,
+	msm_mux_pwm0,
+	msm_mux_pwm1,
+	msm_mux_pwm2,
+	msm_mux_pwm3,
+	msm_mux_qdss_cti_trig_in_a0,
+	msm_mux_qdss_cti_trig_in_a1,
+	msm_mux_qdss_cti_trig_in_b0,
+	msm_mux_qdss_cti_trig_in_b1,
+	msm_mux_qdss_cti_trig_out_a0,
+	msm_mux_qdss_cti_trig_out_a1,
+	msm_mux_qdss_cti_trig_out_b0,
+	msm_mux_qdss_cti_trig_out_b1,
+	msm_mux_qdss_traceclk_a,
+	msm_mux_qdss_traceclk_b,
+	msm_mux_qdss_tracectl_a,
+	msm_mux_qdss_tracectl_b,
+	msm_mux_qdss_tracedata_a,
+	msm_mux_qdss_tracedata_b,
+	msm_mux_qpic,
+	msm_mux_rx0,
+	msm_mux_rx1,
+	msm_mux_rx2,
+	msm_mux_sd_card,
+	msm_mux_sd_write,
+	msm_mux_tsens_max,
+	msm_mux_wci2a,
+	msm_mux_wci2b,
+	msm_mux_wci2c,
+	msm_mux_wci2d,
+	msm_mux_NA,
+};
+
+static const char * const qpic_groups[] = {
+	"gpio0",	/* LCD_TE */
+	"gpio1",	/* BUSY_N */
+	"gpio2",	/* LCD_RS_N */
+	"gpio3",	/* WE_N */
+	"gpio4",	/* OE_N */
+	"gpio5",	/* DATA[0] */
+	"gpio6",	/* DATA[1] */
+	"gpio7",	/* DATA[2] */
+	"gpio8",	/* DATA[3] */
+	"gpio9",	/* CS_CSR_LCD */
+	"gpio10",	/* CLE */
+	"gpio11",	/* NAND_CS_N */
+	"gpio12",	/* DATA[4] */
+	"gpio13",	/* DATA[5] */
+	"gpio14",	/* DATA[6] */
+	"gpio15",	/* DATA[7] */
+	"gpio16",	/* DATA[8] */
+	"gpio17",	/* ALE */
+};
+
+static const char * const blsp5_i2c_groups[] = {
+	"gpio0", "gpio2",
+};
+
+static const char * const blsp5_spi_groups[] = {
+	"gpio0", "gpio2", "gpio9", "gpio16",
+};
+
+static const char * const wci2a_groups[] = {
+	"gpio0", "gpio2",
+};
+
+static const char * const blsp3_spi3_groups[] = {
+	"gpio0", "gpio2", "gpio9",
+};
+
+static const char * const burn0_groups[] = {
+	"gpio0",
+};
+
+static const char * const pcm_zsi0_groups[] = {
+	"gpio1",
+};
+
+static const char * const blsp5_uart_groups[] = {
+	"gpio0", "gpio2", "gpio9", "gpio16",
+};
+
+static const char * const mac1_sa2_groups[] = {
+	"gpio1", "gpio11",
+};
+
+static const char * const blsp3_spi0_groups[] = {
+	"gpio1", "gpio3", "gpio4",
+};
+
+static const char * const burn1_groups[] = {
+	"gpio1",
+};
+
+static const char * const mac0_sa1_groups[] = {
+	"gpio3", "gpio4",
+};
+
+static const char * const qdss_cti_trig_out_b0_groups[] = {
+	"gpio3",
+};
+
+static const char * const qdss_cti_trig_in_b0_groups[] = {
+	"gpio4",
+};
+
+static const char * const blsp4_uart0_groups[] = {
+	"gpio5", "gpio6", "gpio7", "gpio8",
+};
+
+static const char * const blsp4_i2c0_groups[] = {
+	"gpio5", "gpio6",
+};
+
+static const char * const blsp4_spi0_groups[] = {
+	"gpio5", "gpio6", "gpio7", "gpio8",
+};
+
+static const char * const mac2_sa1_groups[] = {
+	"gpio5", "gpio6",
+};
+
+static const char * const qdss_cti_trig_out_b1_groups[] = {
+	"gpio5",
+};
+
+static const char * const qdss_cti_trig_in_b1_groups[] = {
+	"gpio6",
+};
+
+static const char * const cxc0_groups[] = {
+	"gpio9", "gpio16",
+};
+
+static const char * const mac1_sa3_groups[] = {
+	"gpio9", "gpio16",
+};
+
+static const char * const qdss_cti_trig_in_a1_groups[] = {
+	"gpio9",
+};
+
+static const char * const qdss_cti_trig_out_a1_groups[] = {
+	"gpio10",
+};
+
+static const char * const wci2c_groups[] = {
+	"gpio11", "gpio17",
+};
+
+static const char * const qdss_cti_trig_in_a0_groups[] = {
+	"gpio11",
+};
+
+static const char * const qdss_cti_trig_out_a0_groups[] = {
+	"gpio12",
+};
+
+static const char * const qdss_traceclk_b_groups[] = {
+	"gpio14",
+};
+
+static const char * const qdss_tracectl_b_groups[] = {
+	"gpio15",
+};
+
+static const char * const pcm_zsi1_groups[] = {
+	"gpio16",
+};
+
+static const char * const qdss_tracedata_b_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22",
+	"gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29",
+	"gpio30", "gpio31",
+};
+
+static const char * const led0_groups[] = {
+	"gpio18",
+};
+
+static const char * const pwm0_groups[] = {
+	"gpio18", "gpio21", "gpio25", "gpio29", "gpio63",
+};
+
+static const char * const led1_groups[] = {
+	"gpio19",
+};
+
+static const char * const pwm1_groups[] = {
+	"gpio19", "gpio22", "gpio26", "gpio30", "gpio64",
+};
+
+static const char * const led2_groups[] = {
+	"gpio20",
+};
+
+static const char * const pwm2_groups[] = {
+	"gpio20", "gpio23", "gpio27", "gpio31", "gpio66",
+};
+
+static const char * const blsp4_uart1_groups[] = {
+	"gpio21", "gpio22", "gpio23", "gpio24",
+};
+
+static const char * const blsp4_i2c1_groups[] = {
+	"gpio21", "gpio22",
+};
+
+static const char * const blsp4_spi1_groups[] = {
+	"gpio21", "gpio22", "gpio23", "gpio24",
+};
+
+static const char * const wci2d_groups[] = {
+	"gpio21", "gpio22",
+};
+
+static const char * const mac1_sa1_groups[] = {
+	"gpio21", "gpio22",
+};
+
+static const char * const blsp3_spi2_groups[] = {
+	"gpio21", "gpio22", "gpio23",
+};
+
+static const char * const pwm3_groups[] = {
+	"gpio24", "gpio28", "gpio32", "gpio67",
+};
+
+static const char * const audio_txmclk_groups[] = {
+	"gpio25",
+};
+
+static const char * const audio_txbclk_groups[] = {
+	"gpio26",
+};
+
+static const char * const audio_txfsync_groups[] = {
+	"gpio27",
+};
+
+static const char * const audio_txd_groups[] = {
+	"gpio28",
+};
+
+static const char * const audio_rxmclk_groups[] = {
+	"gpio29",
+};
+
+static const char * const atest_char0_groups[] = {
+	"gpio29",
+};
+
+static const char * const audio_rxbclk_groups[] = {
+	"gpio30",
+};
+
+static const char * const atest_char1_groups[] = {
+	"gpio30",
+};
+
+static const char * const audio_rxfsync_groups[] = {
+	"gpio31",
+};
+
+static const char * const atest_char2_groups[] = {
+	"gpio31",
+};
+
+static const char * const audio_rxd_groups[] = {
+	"gpio32",
+};
+
+static const char * const atest_char3_groups[] = {
+	"gpio32",
+};
+
+static const char * const pcm_drx_groups[] = {
+	"gpio33",
+};
+
+static const char * const mac1_sa0_groups[] = {
+	"gpio33", "gpio34",
+};
+
+static const char * const mac0_sa0_groups[] = {
+	"gpio33", "gpio34",
+};
+
+static const char * const pcm_dtx_groups[] = {
+	"gpio34",
+};
+
+static const char * const pcm_fsync_groups[] = {
+	"gpio35",
+};
+
+static const char * const mac2_sa0_groups[] = {
+	"gpio35", "gpio36",
+};
+
+static const char * const qdss_traceclk_a_groups[] = {
+	"gpio35",
+};
+
+static const char * const pcm_pclk_groups[] = {
+	"gpio36",
+};
+
+static const char * const qdss_tracectl_a_groups[] = {
+	"gpio36",
+};
+
+static const char * const atest_char_groups[] = {
+	"gpio37",
+};
+
+static const char * const qdss_tracedata_a_groups[] = {
+	"gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
+	"gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", "gpio50",
+	"gpio51", "gpio52",
+};
+
+static const char * const blsp0_uart_groups[] = {
+	"gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp0_i2c_groups[] = {
+	"gpio38", "gpio39",
+};
+
+static const char * const blsp0_spi_groups[] = {
+	"gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp1_uart_groups[] = {
+	"gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp1_i2c_groups[] = {
+	"gpio42", "gpio43",
+};
+
+static const char * const blsp1_spi_groups[] = {
+	"gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp2_uart_groups[] = {
+	"gpio46", "gpio47", "gpio48", "gpio49",
+};
+
+static const char * const blsp2_i2c_groups[] = {
+	"gpio46", "gpio47",
+};
+
+static const char * const blsp2_spi_groups[] = {
+	"gpio46", "gpio47", "gpio48", "gpio49",
+};
+
+static const char * const blsp3_uart_groups[] = {
+	"gpio50", "gpio51", "gpio52", "gpio53",
+};
+
+static const char * const blsp3_i2c_groups[] = {
+	"gpio50", "gpio51",
+};
+
+static const char * const blsp3_spi_groups[] = {
+	"gpio50", "gpio51", "gpio52", "gpio53",
+};
+
+static const char * const pta2_0_groups[] = {
+	"gpio54",
+};
+
+static const char * const wci2b_groups[] = {
+	"gpio54", "gpio56",
+};
+
+static const char * const cxc1_groups[] = {
+	"gpio54", "gpio56",
+};
+
+static const char * const blsp3_spi1_groups[] = {
+	"gpio54", "gpio55", "gpio56",
+};
+
+static const char * const pta2_1_groups[] = {
+	"gpio55",
+};
+
+static const char * const pta2_2_groups[] = {
+	"gpio56",
+};
+
+static const char * const pcie0_clk_groups[] = {
+	"gpio57",
+};
+
+static const char * const dbg_out_groups[] = {
+	"gpio57",
+};
+
+static const char * const cri_trng0_groups[] = {
+	"gpio57",
+};
+
+static const char * const pcie0_rst_groups[] = {
+	"gpio58",
+};
+
+static const char * const cri_trng1_groups[] = {
+	"gpio58",
+};
+
+static const char * const pcie0_wake_groups[] = {
+	"gpio59",
+};
+
+static const char * const cri_trng_groups[] = {
+	"gpio59",
+};
+
+static const char * const pcie1_clk_groups[] = {
+	"gpio60",
+};
+
+static const char * const rx2_groups[] = {
+	"gpio60",
+};
+
+static const char * const ldo_update_groups[] = {
+	"gpio60",
+};
+
+static const char * const pcie1_rst_groups[] = {
+	"gpio61",
+};
+
+static const char * const ldo_en_groups[] = {
+	"gpio61",
+};
+
+static const char * const pcie1_wake_groups[] = {
+	"gpio62",
+};
+
+static const char * const gcc_plltest_groups[] = {
+	"gpio62", "gpio63",
+};
+
+static const char * const sd_card_groups[] = {
+	"gpio63",
+};
+
+static const char * const pta1_1_groups[] = {
+	"gpio64",
+};
+
+static const char * const rx1_groups[] = {
+	"gpio64",
+};
+
+static const char * const pta1_2_groups[] = {
+	"gpio65",
+};
+
+static const char * const gcc_tlmm_groups[] = {
+	"gpio65",
+};
+
+static const char * const pta1_0_groups[] = {
+	"gpio66",
+};
+
+static const char * const prng_rosc_groups[] = {
+	"gpio66",
+};
+
+static const char * const sd_write_groups[] = {
+	"gpio67",
+};
+
+static const char * const rx0_groups[] = {
+	"gpio67",
+};
+
+static const char * const tsens_max_groups[] = {
+	"gpio67",
+};
+
+static const char * const mdc_groups[] = {
+	"gpio68",
+};
+
+static const char * const mdio_groups[] = {
+	"gpio69",
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69",
+};
+
+static const struct msm_function ipq8074_functions[] = {
+	FUNCTION(atest_char),
+	FUNCTION(atest_char0),
+	FUNCTION(atest_char1),
+	FUNCTION(atest_char2),
+	FUNCTION(atest_char3),
+	FUNCTION(audio_rxbclk),
+	FUNCTION(audio_rxd),
+	FUNCTION(audio_rxfsync),
+	FUNCTION(audio_rxmclk),
+	FUNCTION(audio_txbclk),
+	FUNCTION(audio_txd),
+	FUNCTION(audio_txfsync),
+	FUNCTION(audio_txmclk),
+	FUNCTION(blsp0_i2c),
+	FUNCTION(blsp0_spi),
+	FUNCTION(blsp0_uart),
+	FUNCTION(blsp1_i2c),
+	FUNCTION(blsp1_spi),
+	FUNCTION(blsp1_uart),
+	FUNCTION(blsp2_i2c),
+	FUNCTION(blsp2_spi),
+	FUNCTION(blsp2_uart),
+	FUNCTION(blsp3_i2c),
+	FUNCTION(blsp3_spi),
+	FUNCTION(blsp3_spi0),
+	FUNCTION(blsp3_spi1),
+	FUNCTION(blsp3_spi2),
+	FUNCTION(blsp3_spi3),
+	FUNCTION(blsp3_uart),
+	FUNCTION(blsp4_i2c0),
+	FUNCTION(blsp4_i2c1),
+	FUNCTION(blsp4_spi0),
+	FUNCTION(blsp4_spi1),
+	FUNCTION(blsp4_uart0),
+	FUNCTION(blsp4_uart1),
+	FUNCTION(blsp5_i2c),
+	FUNCTION(blsp5_spi),
+	FUNCTION(blsp5_uart),
+	FUNCTION(burn0),
+	FUNCTION(burn1),
+	FUNCTION(cri_trng),
+	FUNCTION(cri_trng0),
+	FUNCTION(cri_trng1),
+	FUNCTION(cxc0),
+	FUNCTION(cxc1),
+	FUNCTION(dbg_out),
+	FUNCTION(gcc_plltest),
+	FUNCTION(gcc_tlmm),
+	FUNCTION(gpio),
+	FUNCTION(ldo_en),
+	FUNCTION(ldo_update),
+	FUNCTION(led0),
+	FUNCTION(led1),
+	FUNCTION(led2),
+	FUNCTION(mac0_sa0),
+	FUNCTION(mac0_sa1),
+	FUNCTION(mac1_sa0),
+	FUNCTION(mac1_sa1),
+	FUNCTION(mac1_sa2),
+	FUNCTION(mac1_sa3),
+	FUNCTION(mac2_sa0),
+	FUNCTION(mac2_sa1),
+	FUNCTION(mdc),
+	FUNCTION(mdio),
+	FUNCTION(pcie0_clk),
+	FUNCTION(pcie0_rst),
+	FUNCTION(pcie0_wake),
+	FUNCTION(pcie1_clk),
+	FUNCTION(pcie1_rst),
+	FUNCTION(pcie1_wake),
+	FUNCTION(pcm_drx),
+	FUNCTION(pcm_dtx),
+	FUNCTION(pcm_fsync),
+	FUNCTION(pcm_pclk),
+	FUNCTION(pcm_zsi0),
+	FUNCTION(pcm_zsi1),
+	FUNCTION(prng_rosc),
+	FUNCTION(pta1_0),
+	FUNCTION(pta1_1),
+	FUNCTION(pta1_2),
+	FUNCTION(pta2_0),
+	FUNCTION(pta2_1),
+	FUNCTION(pta2_2),
+	FUNCTION(pwm0),
+	FUNCTION(pwm1),
+	FUNCTION(pwm2),
+	FUNCTION(pwm3),
+	FUNCTION(qdss_cti_trig_in_a0),
+	FUNCTION(qdss_cti_trig_in_a1),
+	FUNCTION(qdss_cti_trig_in_b0),
+	FUNCTION(qdss_cti_trig_in_b1),
+	FUNCTION(qdss_cti_trig_out_a0),
+	FUNCTION(qdss_cti_trig_out_a1),
+	FUNCTION(qdss_cti_trig_out_b0),
+	FUNCTION(qdss_cti_trig_out_b1),
+	FUNCTION(qdss_traceclk_a),
+	FUNCTION(qdss_traceclk_b),
+	FUNCTION(qdss_tracectl_a),
+	FUNCTION(qdss_tracectl_b),
+	FUNCTION(qdss_tracedata_a),
+	FUNCTION(qdss_tracedata_b),
+	FUNCTION(qpic),
+	FUNCTION(rx0),
+	FUNCTION(rx1),
+	FUNCTION(rx2),
+	FUNCTION(sd_card),
+	FUNCTION(sd_write),
+	FUNCTION(tsens_max),
+	FUNCTION(wci2a),
+	FUNCTION(wci2b),
+	FUNCTION(wci2c),
+	FUNCTION(wci2d),
+};
+
+static const struct msm_pingroup ipq8074_groups[] = {
+	PINGROUP(0, qpic, blsp5_uart, blsp5_i2c, blsp5_spi, wci2a,
+		 blsp3_spi3, NA, burn0, NA),
+	PINGROUP(1, qpic, pcm_zsi0, mac1_sa2, blsp3_spi0, NA, burn1, NA, NA,
+		 NA),
+	PINGROUP(2, qpic, blsp5_uart, blsp5_i2c, blsp5_spi, wci2a,
+		 blsp3_spi3, NA, NA, NA),
+	PINGROUP(3, qpic, mac0_sa1, blsp3_spi0, qdss_cti_trig_out_b0, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(4, qpic, mac0_sa1, blsp3_spi0, qdss_cti_trig_in_b0, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(5, qpic, blsp4_uart0, blsp4_i2c0, blsp4_spi0, mac2_sa1,
+		 qdss_cti_trig_out_b1, NA, NA, NA),
+	PINGROUP(6, qpic, blsp4_uart0, blsp4_i2c0, blsp4_spi0, mac2_sa1,
+		 qdss_cti_trig_in_b1, NA, NA, NA),
+	PINGROUP(7, qpic, blsp4_uart0, blsp4_spi0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(8, qpic, blsp4_uart0, blsp4_spi0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(9, qpic, blsp5_uart, blsp5_spi, cxc0, mac1_sa3, blsp3_spi3,
+		 qdss_cti_trig_in_a1, NA, NA),
+	PINGROUP(10, qpic, qdss_cti_trig_out_a1, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(11, qpic, wci2c, mac1_sa2, qdss_cti_trig_in_a0, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(12, qpic, qdss_cti_trig_out_a0, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(13, qpic, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(14, qpic, qdss_traceclk_b, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(15, qpic, qdss_tracectl_b, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(16, qpic, blsp5_uart, pcm_zsi1, blsp5_spi, cxc0, mac1_sa3,
+		 qdss_tracedata_b, NA, NA),
+	PINGROUP(17, qpic, wci2c, qdss_tracedata_b, NA, NA, NA, NA, NA, NA),
+	PINGROUP(18, led0, pwm0, qdss_tracedata_b, NA, NA, NA, NA, NA, NA),
+	PINGROUP(19, led1, pwm1, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(20, led2, pwm2, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(21, pwm0, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci2d, mac1_sa1,
+		 blsp3_spi2, NA, qdss_tracedata_b),
+	PINGROUP(22, pwm1, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci2d, mac1_sa1,
+		 blsp3_spi2, NA, qdss_tracedata_b),
+	PINGROUP(23, pwm2, blsp4_uart1, blsp4_spi1, blsp3_spi2, NA,
+		 qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(24, pwm3, blsp4_uart1, blsp4_spi1, NA, qdss_tracedata_b, NA,
+		 NA, NA, NA),
+	PINGROUP(25, audio_txmclk, pwm0, NA, qdss_tracedata_b, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(26, audio_txbclk, pwm1, NA, qdss_tracedata_b, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(27, audio_txfsync, pwm2, NA, qdss_tracedata_b, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(28, audio_txd, pwm3, NA, qdss_tracedata_b, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(29, audio_rxmclk, pwm0, atest_char0, NA, qdss_tracedata_b,
+		 NA, NA, NA, NA),
+	PINGROUP(30, audio_rxbclk, pwm1, atest_char1, NA, qdss_tracedata_b,
+		 NA, NA, NA, NA),
+	PINGROUP(31, audio_rxfsync, pwm2, atest_char2, NA, qdss_tracedata_b,
+		 NA, NA, NA, NA),
+	PINGROUP(32, audio_rxd, pwm3, atest_char3, NA, NA, NA, NA, NA, NA),
+	PINGROUP(33, pcm_drx, mac1_sa0, mac0_sa0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(34, pcm_dtx, mac1_sa0, mac0_sa0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(35, pcm_fsync, mac2_sa0, qdss_traceclk_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(36, pcm_pclk, mac2_sa0, NA, qdss_tracectl_a, NA, NA, NA, NA, NA),
+	PINGROUP(37, atest_char, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(38, blsp0_uart, blsp0_i2c, blsp0_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(39, blsp0_uart, blsp0_i2c, blsp0_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(40, blsp0_uart, blsp0_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(41, blsp0_uart, blsp0_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(42, blsp1_uart, blsp1_i2c, blsp1_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(43, blsp1_uart, blsp1_i2c, blsp1_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(44, blsp1_uart, blsp1_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(45, blsp1_uart, blsp1_spi, qdss_tracedata_a, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(46, blsp2_uart, blsp2_i2c, blsp2_spi, qdss_tracedata_a, NA,
+		 NA, NA, NA, NA),
+	PINGROUP(47, blsp2_uart, blsp2_i2c, blsp2_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(48, blsp2_uart, blsp2_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(49, blsp2_uart, blsp2_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(50, blsp3_uart, blsp3_i2c, blsp3_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(51, blsp3_uart, blsp3_i2c, blsp3_spi, NA, qdss_tracedata_a,
+		 NA, NA, NA, NA),
+	PINGROUP(52, blsp3_uart, blsp3_spi, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(53, blsp3_uart, blsp3_spi, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(54, pta2_0, wci2b, cxc1, blsp3_spi1, NA, NA, NA, NA, NA),
+	PINGROUP(55, pta2_1, blsp3_spi1, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(56, pta2_2, wci2b, cxc1, blsp3_spi1, NA, NA, NA, NA, NA),
+	PINGROUP(57, pcie0_clk, NA, dbg_out, cri_trng0, NA, NA, NA, NA, NA),
+	PINGROUP(58, pcie0_rst, NA, cri_trng1, NA, NA, NA, NA, NA, NA),
+	PINGROUP(59, pcie0_wake, NA, cri_trng, NA, NA, NA, NA, NA, NA),
+	PINGROUP(60, pcie1_clk, rx2, ldo_update, NA, NA, NA, NA, NA, NA),
+	PINGROUP(61, pcie1_rst, ldo_en, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(62, pcie1_wake, gcc_plltest, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(63, sd_card, pwm0, NA, gcc_plltest, NA, NA, NA, NA, NA),
+	PINGROUP(64, pta1_1, pwm1, NA, rx1, NA, NA, NA, NA, NA),
+	PINGROUP(65, pta1_2, NA, gcc_tlmm, NA, NA, NA, NA, NA, NA),
+	PINGROUP(66, pta1_0, pwm2, prng_rosc, NA, NA, NA, NA, NA, NA),
+	PINGROUP(67, sd_write, pwm3, rx0, tsens_max, NA, NA, NA, NA, NA),
+	PINGROUP(68, mdc, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(69, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
+};
+
+static const struct msm_pinctrl_soc_data ipq8074_pinctrl = {
+	.pins = ipq8074_pins,
+	.npins = ARRAY_SIZE(ipq8074_pins),
+	.functions = ipq8074_functions,
+	.nfunctions = ARRAY_SIZE(ipq8074_functions),
+	.groups = ipq8074_groups,
+	.ngroups = ARRAY_SIZE(ipq8074_groups),
+	.ngpios = 70,
+};
+
+static int ipq8074_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &ipq8074_pinctrl);
+}
+
+static const struct of_device_id ipq8074_pinctrl_of_match[] = {
+	{ .compatible = "qcom,ipq8074-pinctrl", },
+	{ },
+};
+
+static struct platform_driver ipq8074_pinctrl_driver = {
+	.driver = {
+		.name = "ipq8074-pinctrl",
+		.of_match_table = ipq8074_pinctrl_of_match,
+	},
+	.probe = ipq8074_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init ipq8074_pinctrl_init(void)
+{
+	return platform_driver_register(&ipq8074_pinctrl_driver);
+}
+arch_initcall(ipq8074_pinctrl_init);
+
+static void __exit ipq8074_pinctrl_exit(void)
+{
+	platform_driver_unregister(&ipq8074_pinctrl_driver);
+}
+module_exit(ipq8074_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm ipq8074 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, ipq8074_pinctrl_of_match);