@@ -309,3 +309,38 @@ U_BOOT_CMD(
"display information about clocks",
""
);
+
+#define GRF_SOC_CON2 0xff77024c
+
+int board_early_init_f(void)
+{
+ struct udevice *pinctrl;
+ struct udevice *dev;
+ int ret;
+
+ /*
+ * This init is done in SPL, but when chain-loading U-Boot SPL will
+ * have been skipped. Allow the clock driver to check if it needs
+ * setting up.
+ */
+ ret = rockchip_get_clk(&dev);
+ if (ret) {
+ debug("CLK init failed: %d\n", ret);
+ return ret;
+ }
+ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+ if (ret) {
+ debug("%s: Cannot find pinctrl device\n", __func__);
+ return ret;
+ }
+
+ /* Enable debug UART */
+ ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
+ if (ret) {
+ debug("%s: Failed to set up console UART\n", __func__);
+ return ret;
+ }
+ rk_setreg(GRF_SOC_CON2, 1 << 0);
+
+ return 0;
+}
@@ -10,6 +10,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry"
CONFIG_SILENT_CONSOLE=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_CMD_IMLS is not set
If U-Boot is chain-loaded from a previous boot loader we must set up the clocks the way U-Boot wants them. Add code for this. It will do nothing if SPL has already done the job. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v2: None arch/arm/mach-rockchip/rk3288-board.c | 35 +++++++++++++++++++++++++++++++++++ configs/chromebook_jerry_defconfig | 1 + 2 files changed, 36 insertions(+)