| Message ID | 20170525030204.126233-3-songxiaowei@hisilicon.com |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, May 25, 2017 at 11:02:02AM +0800, Xiaowei Song wrote: > Add PCIe node for hi3660, and add binding documentation. > > Cc: Guodong Xu <guodong.xu@linaro.org> > Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com> > --- > arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi > index 3983086bd67b..8609e32ca46f 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi > +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi > @@ -156,5 +156,36 @@ > clock-names = "uartclk", "apb_pclk"; > status = "disabled"; > }; > + > + pcie@f4000000 { > + compatible = "hisilicon,kirin960-pcie"; > + reg = <0x0 0xf4000000 0x0 0x1000>, > + <0x0 0xff3fe000 0x0 0x1000>, > + <0x0 0xf3f20000 0x0 0x40000>, > + <0x0 0xF5000000 0x0 0x2000>; s/0xF5000000/0xf5000000/ Please indent these consistently so the cells line up, e.g., reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>, <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xf5000000 0x0 0x2000>; > + reg-names = "dbi", "apb", "phy", "config"; > + bus-range = <0x0 0x1>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges = <0x02000000 0x0 0x00000000 0x0 > + 0xf6000000 0x0 0x2000000>; > + num-lanes = <1>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0xf800 0 0 7>; > + interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>, > + <0x0 0 0 2 &gic 0 0 0 283 4>, > + <0x0 0 0 3 &gic 0 0 0 284 4>, > + <0x0 0 0 4 &gic 0 0 0 285 4>; > + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, > + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, > + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, > + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, > + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; Line up cells above. > + clock-names = "pcie_phy_ref", "pcie_aux", > + "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; > + reset-gpio = <&gpio11 1 0 >; > + status = "ok"; > + }; > }; > }; > -- > 2.11.GIT >
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 3983086bd67b..8609e32ca46f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -156,5 +156,36 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xF5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 0x0 + 0xf6000000 0x0 0x2000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>, + <0x0 0 0 2 &gic 0 0 0 283 4>, + <0x0 0 0 3 &gic 0 0 0 284 4>, + <0x0 0 0 4 &gic 0 0 0 285 4>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; + reset-gpio = <&gpio11 1 0 >; + status = "ok"; + }; }; };
Add PCIe node for hi3660, and add binding documentation. Cc: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com> --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)