Patchwork [U-Boot,3/4] bfin_spi: add spi_set_speed

login
register
mail settings
Submitter Thomas Chou
Date Dec. 24, 2010, 7:16 a.m.
Message ID <1293174969-18653-4-git-send-email-thomas@wytron.com.tw>
Download mbox | patch
Permalink /patch/76626/
State Accepted
Commit 6c3eb43a0f60ee50ca86db3544988ff09163ddbd
Delegated to: Mike Frysinger
Headers show

Comments

Thomas Chou - Dec. 24, 2010, 7:16 a.m.
The new speed will be applied by spi_claim_bus.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
 drivers/spi/bfin_spi.c |   32 +++++++++++++++++++-------------
 1 files changed, 19 insertions(+), 13 deletions(-)
Mike Frysinger - Dec. 24, 2010, 5:25 p.m.
On Friday, December 24, 2010 02:16:08 Thomas Chou wrote:
> The new speed will be applied by spi_claim_bus.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
-mike

Patch

diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index d7e1474..bfecdaf 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -138,13 +138,29 @@  static const unsigned short cs_pins[][7] = {
 #endif
 };
 
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+	ulong sclk;
+	u32 baud;
+
+	sclk = get_sclk();
+	baud = sclk / (2 * hz);
+	/* baud should be rounded up */
+	if (sclk % (2 * hz))
+		baud += 1;
+	if (baud < 2)
+		baud = 2;
+	else if (baud > (u16)-1)
+		baud = -1;
+	bss->baud = baud;
+}
+
 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		unsigned int max_hz, unsigned int mode)
 {
 	struct bfin_spi_slave *bss;
-	ulong sclk;
 	u32 mmr_base;
-	u32 baud;
 
 	if (!spi_cs_is_valid(bus, cs))
 		return NULL;
@@ -166,16 +182,6 @@  struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		default: return NULL;
 	}
 
-	sclk = get_sclk();
-	baud = sclk / (2 * max_hz);
-	/* baud should be rounded up */
-	if (sclk % (2 * max_hz))
-		baud += 1;
-	if (baud < 2)
-		baud = 2;
-	else if (baud > (u16)-1)
-		baud = -1;
-
 	bss = malloc(sizeof(*bss));
 	if (!bss)
 		return NULL;
@@ -187,8 +193,8 @@  struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	if (mode & SPI_CPHA) bss->ctl |= CPHA;
 	if (mode & SPI_CPOL) bss->ctl |= CPOL;
 	if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF;
-	bss->baud = baud;
 	bss->flg = mode & SPI_CS_HIGH ? 1 : 0;
+	spi_set_speed(&bss->slave, max_hz);
 
 	debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__,
 		bus, cs, mmr_base, bss->ctl, baud, bss->flg);