@@ -18,6 +18,15 @@ config BOOTSTAGE
Calls to show_boot_progress() will also result in log entries but
these will not have names.
+config SPL_BOOTSTAGE
+ bool "Boot timing and reported in SPL"
+ depends on BOOTSTAGE
+ help
+ Enable recording of boot time in SPL. To make this visible to U-Boot
+ proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+ information when SPL finishes and load it when U-Boot proper starts
+ up.
+
config BOOTSTAGE_REPORT
bool "Display a detailed boot timing report before booting the OS"
depends on BOOTSTAGE
@@ -65,7 +65,6 @@ obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
# others
-obj-$(CONFIG_BOOTSTAGE) += bootstage.o
obj-$(CONFIG_CONSOLE_MUX) += iomux.o
obj-$(CONFIG_MTD_NOR_FLASH) += flash.o
obj-$(CONFIG_CMD_KGDB) += kgdb.o kgdb_stubs.o
@@ -89,6 +88,8 @@ obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o
endif # !CONFIG_SPL_BUILD
+obj-$(CONFIG_$(SPL_)BOOTSTAGE) += bootstage.o
+
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o
obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
@@ -704,11 +704,26 @@ static int jump_to_copy(void)
/* Record the board_init_f() bootstage (after arch_cpu_init()) */
static int initf_bootstage(void)
{
+#if defined(CONFIG_SPL_BOOTSTAGE) && defined(CONFIG_BOOTSTAGE_STASH)
+ bool from_spl = true;
+#else
+ bool from_spl = false;
+#endif
int ret;
- ret = bootstage_init(true);
+ ret = bootstage_init(!from_spl);
if (ret)
return ret;
+ if (from_spl) {
+ const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR,
+ CONFIG_BOOTSTAGE_STASH_SIZE);
+
+ ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE);
+ if (ret && ret != -ENOENT) {
+ debug("Failed to unstash bootstage: err=%d\n", ret);
+ return ret;
+ }
+ }
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
@@ -232,6 +232,13 @@ static int spl_common_init(bool setup_malloc)
gd->malloc_ptr = 0;
}
#endif
+ ret = bootstage_init(true);
+ if (ret) {
+ debug("%s: Failed to set up bootstage: ret=%d\n", __func__,
+ ret);
+ return ret;
+ }
+ bootstage_mark_name(BOOTSTAGE_ID_START_SPL, "spl");
if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
ret = fdtdec_setup();
if (ret) {
@@ -240,8 +247,10 @@ static int spl_common_init(bool setup_malloc)
}
}
if (IS_ENABLED(CONFIG_SPL_DM)) {
+ bootstage_start(BOOTSTATE_ID_ACCUM_DM_SPL, "dm_spl");
/* With CONFIG_SPL_OF_PLATDATA, bring in all devices */
ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA));
+ bootstage_accum(BOOTSTATE_ID_ACCUM_DM_SPL);
if (ret) {
debug("dm_init_and_scan() returned error %d\n", ret);
return ret;
@@ -421,6 +430,15 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
}
debug("loaded - jumping to U-Boot...\n");
+#ifdef CONFIG_BOOTSTAGE_STASH
+ int ret;
+
+ bootstage_mark_name(BOOTSTAGE_ID_END_SPL, "end_spl");
+ ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR,
+ CONFIG_BOOTSTAGE_STASH_SIZE);
+ if (ret)
+ debug("Failed to stash bootstage: err=%d\n", ret);
+#endif
spl_board_prepare_for_boot();
jump_to_image_no_args(&spl_image);
}
@@ -177,6 +177,7 @@ enum bootstage_id {
*/
BOOTSTAGE_ID_AWAKE,
BOOTSTAGE_ID_START_SPL,
+ BOOTSTAGE_ID_END_SPL,
BOOTSTAGE_ID_START_UBOOT_F,
BOOTSTAGE_ID_START_UBOOT_R,
BOOTSTAGE_ID_USB_START,
@@ -200,6 +201,7 @@ enum bootstage_id {
BOOTSTAGE_ID_ACCUM_SPI,
BOOTSTAGE_ID_ACCUM_DECOMP,
BOOTSTAGE_ID_FPGA_INIT,
+ BOOTSTATE_ID_ACCUM_DM_SPL,
BOOTSTATE_ID_ACCUM_DM_F,
BOOTSTATE_ID_ACCUM_DM_R,
@@ -228,8 +230,14 @@ ulong timer_get_boot_us(void);
void show_boot_progress(int val);
#endif
-#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \
- !defined(USE_HOSTCC)
+#if !defined(USE_HOSTCC)
+#if CONFIG_IS_ENABLED(BOOTSTAGE)
+#define ENABLE_BOOTSTAGE
+#endif
+#endif
+
+#ifdef ENABLE_BOOTSTAGE
+
/* This is the full bootstage implementation */
/**
@@ -420,7 +428,8 @@ static inline int bootstage_init(bool first)
{
return 0;
}
-#endif /* CONFIG_BOOTSTAGE */
+
+#endif /* ENABLE_BOOTSTAGE */
/* Helper macro for adding a bootstage to a line of code */
#define BOOTSTAGE_MARKER() \
At present bootstage only supports U-Boot proper. But SPL can also consume boot time so it is useful to have the record start there. Add bootstage support to SPL. Also support stashing the timing information when SPL finishes so that it can be picked up and reported by U-Boot proper. This provides a full boot time record, excluding only the time taken by the boot ROM. Signed-off-by: Simon Glass <sjg@chromium.org> --- common/Kconfig | 9 +++++++++ common/Makefile | 3 ++- common/board_f.c | 17 ++++++++++++++++- common/spl/spl.c | 18 ++++++++++++++++++ include/bootstage.h | 15 ++++++++++++--- 5 files changed, 57 insertions(+), 5 deletions(-)