new file mode 100644
@@ -0,0 +1,8 @@
+setenv fdt_high ffffffff
+
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-zero.dtb
+
+bootz $kernel_addr_r - $fdt_addr_r
new file mode 100644
@@ -0,0 +1,36 @@
+# Minimal SD card image for the OrangePi PC
+#
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "sun8i-h2-plus-orangepi-zero.dtb",
+ "boot.scr"
+ }
+ }
+ size = 10M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
new file mode 100644
@@ -0,0 +1,17 @@
+# spidev
+CONFIG_SPI_SPIDEV=y
+
+# spi nor
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_M25P80=y
+
+# wireless core
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_CFG80211_WEXT=y
+
+# wireless drivers
+CONFIG_WLAN=y
new file mode 100644
@@ -0,0 +1,32 @@
+From d06068f474e029bbde7348108c509cc63d6aa196 Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 19 May 2017 23:39:48 +0300
+Subject: [PATCH 1/2] ARM: dts: orange-pi-zero: interrupt triggering for XR819
+ WiFi chip
+
+Specify interrupt triggering for XR819 SDIO WiFi chip
+on orange-pi-zero board.
+
+For more details see: http://linux-sunxi.org/Wifi#Allwinner
+
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+index b7ca916d871d..6510d22deed3 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+@@ -125,6 +125,8 @@
+ */
+ xr819: sdio_wifi@1 {
+ reg = <1>;
++ interrupt-parent = <&pio>;
++ interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+--
+2.11.0
+
new file mode 100644
@@ -0,0 +1,42 @@
+From f6ea4149cb1093a32a574a12496cbdbf3adbff93 Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Sat, 20 May 2017 11:24:26 +0300
+Subject: [PATCH 2/2] ARM: dts: orange-pi-zero: enable SPI NOR
+
+Enable SPI NOR on orange-pi-zero board.
+
+For more information see:
+- http://linux-sunxi.org/Orange_Pi_Zero#SPI_NOR_flash
+
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+index 6510d22deed3..119f529e6d22 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+@@ -160,3 +160,19 @@
+ /* USB VBUS is always on */
+ status = "okay";
+ };
++
++&spi0 {
++ status = "okay";
++
++ flash@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "mxicy,mx25l1606e", "winbond,w25q128";
++ reg = <0>;
++ spi-max-frequency = <40000000>;
++
++ partition@00000000 {
++ reg = <0x00000000 0x200000>; /* 2Mb */
++ };
++ };
++};
+--
+2.11.0
+
new file mode 100644
@@ -0,0 +1,42 @@
+From 5487218257a40c24aa0960f323ccfbd3793ab560 Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Sat, 20 May 2017 15:36:51 +0300
+Subject: [PATCH 3/3] ARM: dts: orange-pi-zero: enable spidev
+
+On orange-pi-zero board SPI1 pins are accessible via GPIO expansion port.
+This patch enables spidev driver for SPI1.
+
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+index 119f529e6d22..da83d92201df 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+@@ -59,6 +59,7 @@
+ serial0 = &uart0;
+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet1 = &xr819;
++ spi1 = &spi1;
+ };
+
+ chosen {
+@@ -176,3 +177,13 @@
+ };
+ };
+ };
++
++&spi1 {
++ status = "okay";
++
++ spidev@0 {
++ compatible = "rohm,dh2228fv";
++ reg = <0>;
++ spi-max-frequency = <10000000>;
++ };
++};
+--
+2.11.0
+
new file mode 120000
@@ -0,0 +1 @@
+../post-build.sh
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+../post-image.sh
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,29 @@
+OrangePi Zero
+
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the OrangePi Zero. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+How to build it
+===============
+
+Configure Buildroot:
+
+ $ make orangepi_zero_defconfig
+
+Compile everything and build the SD card image:
+
+ $ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
new file mode 100644
@@ -0,0 +1,42 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_FPU_VFPV4=y
+BR2_GLOBAL_PATCH_DIR="board/orangepi/orangepi-zero/patches"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
+BR2_TARGET_GENERIC_HOSTNAME="OrangePi_Zero"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi Zero"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-zero/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/orangepi/orangepi-zero/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-orangepi-zero"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero/linux-extras.config"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.03"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+
+# wireless support
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+
+# spi flash support
+BR2_PACKAGE_MTD=y
Board support package includes the following components: - mainline kernel v4.11 - mainline u-boot v2017.03 - extra kernel config options and dts patches to enable SPI NOR and spidev More details about this board are available here: - http://linux-sunxi.org/Orange_Pi_Zero Note that at the moment networking is not supported right out of the box. Ethernet submission to mainline kernel is a work in progress, see the latest dwmac-sun8i branches at https://github.com/montjoie/linux On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless driver available at https://github.com/fifteenhex/xradio Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> --- board/orangepi/orangepi-zero/boot.cmd | 8 +++++ board/orangepi/orangepi-zero/genimage.cfg | 36 +++++++++++++++++++ board/orangepi/orangepi-zero/linux-extras.config | 17 +++++++++ ...orange-pi-zero-interrupt-triggering-xr819.patch | 32 +++++++++++++++++ ...002-ARM-dts-orange-pi-zero-enable-spi-nor.patch | 42 ++++++++++++++++++++++ ...0003-ARM-dts-orange-pi-zero-enable-spidev.patch | 42 ++++++++++++++++++++++ board/orangepi/orangepi-zero/post-build.sh | 1 + board/orangepi/orangepi-zero/post-image.sh | 1 + board/orangepi/orangepi-zero/readme.txt | 29 +++++++++++++++ configs/orangepi_zero_defconfig | 42 ++++++++++++++++++++++ 10 files changed, 250 insertions(+) create mode 100644 board/orangepi/orangepi-zero/boot.cmd create mode 100644 board/orangepi/orangepi-zero/genimage.cfg create mode 100644 board/orangepi/orangepi-zero/linux-extras.config create mode 100644 board/orangepi/orangepi-zero/patches/linux/0001-ARM-dts-orange-pi-zero-interrupt-triggering-xr819.patch create mode 100644 board/orangepi/orangepi-zero/patches/linux/0002-ARM-dts-orange-pi-zero-enable-spi-nor.patch create mode 100644 board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-spidev.patch create mode 120000 board/orangepi/orangepi-zero/post-build.sh create mode 120000 board/orangepi/orangepi-zero/post-image.sh create mode 100644 board/orangepi/orangepi-zero/readme.txt create mode 100644 configs/orangepi_zero_defconfig