diff mbox

[U-Boot,04/15] powerpc/85xx: Rework MPC8544DS pci_init_board to use common FSL PCIe code

Message ID 1292629858-10233-4-git-send-email-galak@kernel.crashing.org
State Accepted
Delegated to: Kumar Gala
Headers show

Commit Message

Kumar Gala Dec. 17, 2010, 11:50 p.m. UTC 
Remove duplicated code in MPC8544DS board and utliize the common
fsl_pcie_init_ctrl().  We also now dynamically setup the LAWs for PCI
controllers based on which PCIe controllers are enabled.

We don't use the full fsl_pcie_init_ctrl() since we have to handle PCIE3
specially to setup the additional memory map region and we utilize a
single LAW to cover the controller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 board/freescale/mpc8544ds/law.c       |   10 +---
 board/freescale/mpc8544ds/mpc8544ds.c |  110 +++++++++++----------------------
 2 files changed, 37 insertions(+), 83 deletions(-)

Comments

Kumar Gala Jan. 9, 2011, 8:47 p.m. UTC | #1 
On Dec 17, 2010, at 5:50 PM, Kumar Gala wrote:

> Remove duplicated code in MPC8544DS board and utliize the common
> fsl_pcie_init_ctrl().  We also now dynamically setup the LAWs for PCI
> controllers based on which PCIe controllers are enabled.
> 
> We don't use the full fsl_pcie_init_ctrl() since we have to handle PCIE3
> specially to setup the additional memory map region and we utilize a
> single LAW to cover the controller.
> 
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> board/freescale/mpc8544ds/law.c       |   10 +---
> board/freescale/mpc8544ds/mpc8544ds.c |  110 +++++++++++----------------------
> 2 files changed, 37 insertions(+), 83 deletions(-)

applied to 85xx, fixed commit typo s/utliize/utilize/

- k
diff mbox

Patch

diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
index 3d308c8..59e03fc 100644
--- a/board/freescale/mpc8544ds/law.c
+++ b/board/freescale/mpc8544ds/law.c
@@ -1,5 +1,5 @@ 
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008, 2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -28,15 +28,7 @@ 
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
 	SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	/* contains both PCIE3 MEM & IO space */
-	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 2b6900c..908077f 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -89,26 +89,28 @@  initdram(int board_type)
 static struct pci_controller pci1_hose;
 #endif
 
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
 #ifdef CONFIG_PCIE3
 static struct pci_controller pcie3_hose;
 #endif
 
+static const char *slot_names[] = {
+	[PCIE1] = "Slot 2",
+	[PCIE2] = "Slot 1",
+	[PCIE3] = "ULI",
+};
+ 
+const char *board_serdes_name(enum srds_prtcl device)
+{
+	return slot_names[device];
+}
+
 void pci_init_board(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	struct fsl_pci_info pci_info[4];
+	struct fsl_pci_info pci_info;
 	u32 devdisr, pordevsr, io_sel;
 	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
 	int first_free_busno = 0;
-	int num = 0;
 
 	int pcie_ep, pcie_configured;
 
@@ -125,9 +127,12 @@  void pci_init_board(void)
 	pcie_configured = is_serdes_configured(PCIE3);
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
-		SET_STD_PCIE_INFO(pci_info[num], 3);
-		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
+		/* contains both PCIE3 MEM & IO space */
+		set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M,
+				LAW_TRGT_IF_PCIE_3);
+		SET_STD_PCIE_INFO(pci_info, 3);
+		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info.regs);
+
 		/* outbound memory */
 		pci_set_region(&pcie3_hose.regions[0],
 			       CONFIG_SYS_PCIE3_MEM_BUS2,
@@ -136,11 +141,11 @@  void pci_init_board(void)
 			       PCI_REGION_MEM);
 
 		pcie3_hose.region_count = 1;
-#endif
+
 		printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
 			pcie_ep ? "Endpoint" : "Root Complex",
-			pci_info[num].regs);
-		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+			pci_info.regs);
+		first_free_busno = fsl_pci_init_port(&pci_info,
 					&pcie3_hose, first_free_busno);
 
 		/*
@@ -157,64 +162,17 @@  void pci_init_board(void)
 #endif
 
 #ifdef CONFIG_PCIE1
-	pcie_configured = is_serdes_configured(PCIE1);
-
-	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-		SET_STD_PCIE_INFO(pci_info[num], 1);
-		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
-		/* outbound memory */
-		pci_set_region(&pcie1_hose.regions[0],
-			       CONFIG_SYS_PCIE1_MEM_BUS2,
-			       CONFIG_SYS_PCIE1_MEM_PHYS2,
-			       CONFIG_SYS_PCIE1_MEM_SIZE2,
-			       PCI_REGION_MEM);
-
-		pcie1_hose.region_count = 1;
-#endif
-		printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
-
-		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
-	} else {
-		printf("PCIE1: disabled\n");
-	}
-
-	puts("\n");
+	SET_STD_PCIE_INFO(pci_info, 1);
+	first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE1, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
+	setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE2
-	pcie_configured = is_serdes_configured(PCIE2);
-
-	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
-		SET_STD_PCIE_INFO(pci_info[num], 2);
-		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
-		/* outbound memory */
-		pci_set_region(&pcie2_hose.regions[0],
-			       CONFIG_SYS_PCIE2_MEM_BUS2,
-			       CONFIG_SYS_PCIE2_MEM_PHYS2,
-			       CONFIG_SYS_PCIE2_MEM_SIZE2,
-			       PCI_REGION_MEM);
-
-		pcie2_hose.region_count = 1;
-#endif
-		printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
-			pcie_ep ? "Endpoint" : "Root Complex",
-			pci_info[num].regs);
-		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie2_hose, first_free_busno);
-	} else {
-		printf("PCIE2: disabled\n");
-	}
-
-	puts("\n");
+	SET_STD_PCIE_INFO(pci_info, 2);
+	first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE2, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
+	setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
 #endif
 
 #ifdef CONFIG_PCI1
@@ -224,8 +182,13 @@  void pci_init_board(void)
 	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-		SET_STD_PCI_INFO(pci_info[num], 1);
-		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+		SET_STD_PCI_INFO(pci_info, 1);
+		set_next_law(pci_info.mem_phys,
+			law_size_bits(pci_info.mem_size), pci_info.law);
+		set_next_law(pci_info.io_phys,
+			law_size_bits(pci_info.io_size), pci_info.law);
+
+		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
 		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
@@ -233,9 +196,9 @@  void pci_init_board(void)
 			pci_clk_sel ? "sync" : "async",
 			pci_agent ? "agent" : "host",
 			pci_arb ? "arbiter" : "external-arbiter",
-			pci_info[num].regs);
+			pci_info.regs);
 
-		first_free_busno = fsl_pci_init_port(&pci_info[num++],
+		first_free_busno = fsl_pci_init_port(&pci_info,
 					&pci1_hose, first_free_busno);
 	} else {
 		printf("PCI: disabled\n");
@@ -247,7 +210,6 @@  void pci_init_board(void)
 #endif
 }
 
-
 int last_stage_init(void)
 {
 	return 0;