diff mbox

[RFC/RFT,07/18] ARM: PCI: orion5x: Convert PCI scan API to pci_scan_root_bus_bridge()

Message ID 20170426161335.GA12240@red-moon
State Not Applicable
Headers show

Commit Message

Lorenzo Pieralisi April 26, 2017, 4:13 p.m. UTC 
On Wed, Apr 26, 2017 at 05:12:57PM +0200, Andrew Lunn wrote:
> On Wed, Apr 26, 2017 at 12:17:58PM +0100, Lorenzo Pieralisi wrote:
> > The introduction of pci_scan_root_bus_bridge() provides a PCI core
> > API to scan a PCI root bus backed by an already initialized
> > struct pci_host_bridge object, which simplifies the bus scan
> > interface and makes the PCI scan root bus interface easier to
> > generalize as members are added to the struct pci_host_bridge().
> > 
> > Convert ARM orion5x platform code to pci_scan_root_bus_bridge() to
> > improve the PCI root bus scanning interface.
> 
> Hi Lorenzo
> 
> Maybe there is something not right here.
> 
> With plain 4.11-rc7 i get:
> 
> root@orion5x:~# lspci -v
> 0000:00:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
>         Subsystem: Marvell Technology Group Ltd. Device 11ab
>         Flags: bus master, fast devsel, latency 0, IRQ 12
>         Memory at <ignored> (64-bit, prefetchable)
>         Capabilities: [40] Power Management version 2
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Capabilities: [60] Express Root Port (Slot-), MSI 00
> 
> 0001:01:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
>         Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 0
>         BIST result: 00
>         Memory at <unassigned> (64-bit, prefetchable)
>         Memory at <ignored> (64-bit, prefetchable)
>         Memory at <ignored> (64-bit, non-prefetchable)
>         Expansion ROM at <ignored> [disabled]
>         Capabilities: [40] Power Management version 2
>         Capabilities: [48] Vital Product Data
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Capabilities: [60] PCI-X non-bridge device
>         Capabilities: [68] CompactPCI hot-swap <?>
> 
> However, with your patches applied i get:
> 
> 0000:00:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
>         Subsystem: Marvell Technology Group Ltd. Device 11ab
>         Flags: bus master, fast devsel, latency 0
>         Memory at <ignored> (64-bit, prefetchable)
>         Capabilities: [40] Power Management version 2
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Capabilities: [60] Express Root Port (Slot-), MSI 00
> 
> 0001:01:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
>         Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 0
>         BIST result: 00
>         Memory at <unassigned> (64-bit, prefetchable)
>         Memory at <ignored> (64-bit, prefetchable)
>         Memory at <ignored> (64-bit, non-prefetchable)
>         Expansion ROM at <ignored> [disabled]
>         Capabilities: [40] Power Management version 2
>         Capabilities: [48] Vital Product Data
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Capabilities: [60] PCI-X non-bridge device
>         Capabilities: [68] CompactPCI hot-swap <?>
> 
> Note that IRQ 12 has disappeared from Flags: on 0000:00:00.0.

Thank you for testing it, that's exactly what we need.

To check if the plumbing is working (ie to check I have not messed
up the bus scan API rework), mind testing the patch below please
and report back (it applies on top of this series) ?

Thanks !
Lorenzo

-- >8 --

Comments

Andrew Lunn April 26, 2017, 6:53 p.m. UTC | #1 
> > Note that IRQ 12 has disappeared from Flags: on 0000:00:00.0.
> 
> Thank you for testing it, that's exactly what we need.
> 
> To check if the plumbing is working (ie to check I have not messed
> up the bus scan API rework), mind testing the patch below please
> and report back (it applies on top of this series) ?

0000:00:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
        Subsystem: Marvell Technology Group Ltd. Device 11ab
        Flags: bus master, fast devsel, latency 0, IRQ 12

The interrupt is back with this patch.

    Andrew
Lorenzo Pieralisi April 27, 2017, 10:40 a.m. UTC | #2 
On Wed, Apr 26, 2017 at 08:53:48PM +0200, Andrew Lunn wrote:
> > > Note that IRQ 12 has disappeared from Flags: on 0000:00:00.0.
> > 
> > Thank you for testing it, that's exactly what we need.
> > 
> > To check if the plumbing is working (ie to check I have not messed
> > up the bus scan API rework), mind testing the patch below please
> > and report back (it applies on top of this series) ?
> 
> 0000:00:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
>         Subsystem: Marvell Technology Group Ltd. Device 11ab
>         Flags: bus master, fast devsel, latency 0, IRQ 12
> 
> The interrupt is back with this patch.

Ok the IRQ allocation works then, the difference is when the mapping
is called, original patch series moves the IRQ allocation to device
probe time (that's why IRQ does not show up, there is no matching
driver in the kernel for the PCI device above), with the additional
patch the IRQ allocation is done when the PCI device is added.

It is a user visible change, not sure though if that's a real issue,
that's exactly the reason why I posted this series, to find out
and converge.

Thanks !
Lorenzo
diff mbox

Patch

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 4632fa4..afa7271 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -400,8 +400,6 @@  static int pci_device_probe(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = to_pci_driver(dev->driver);
 
-	pci_assign_irq(pci_dev);
-
 	error = pcibios_alloc_irq(pci_dev);
 	if (error < 0)
 		return error;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index de259f3..dc9a1b6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1967,6 +1967,8 @@  void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	ret = pcibios_add_device(dev);
 	WARN_ON(ret < 0);
 
+	pci_assign_irq(dev);
+
 	/* Setup MSI irq domain */
 	pci_set_msi_domain(dev);