Patchwork [U-Boot,2/4] powerpc/85xx: Removed support for MPC8540EVAL board

login
register
mail settings
Submitter Kumar Gala
Date Dec. 14, 2010, 4:12 a.m.
Message ID <1292299966-8801-2-git-send-email-galak@kernel.crashing.org>
Download mbox | patch
Permalink /patch/75463/
State Accepted
Commit 341d30d4c8ebebd6bdde6365ae26486c91e533c6
Delegated to: Kumar Gala
Headers show

Comments

Kumar Gala - Dec. 14, 2010, 4:12 a.m.
The MPC8540EVAL board is no longer maintained and thus we are removing
support for it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 board/mpc8540eval/Makefile      |   54 ---
 board/mpc8540eval/ddr.c         |   73 ----
 board/mpc8540eval/flash.c       |  894 ---------------------------------------
 board/mpc8540eval/law.c         |   54 ---
 board/mpc8540eval/mpc8540eval.c |  230 ----------
 board/mpc8540eval/tlb.c         |   78 ----
 boards.cfg                      |    5 -
 include/configs/MPC8540EVAL.h   |  362 ----------------
 8 files changed, 0 insertions(+), 1750 deletions(-)
 delete mode 100644 board/mpc8540eval/Makefile
 delete mode 100644 board/mpc8540eval/ddr.c
 delete mode 100644 board/mpc8540eval/flash.c
 delete mode 100644 board/mpc8540eval/law.c
 delete mode 100644 board/mpc8540eval/mpc8540eval.c
 delete mode 100644 board/mpc8540eval/tlb.c
 delete mode 100644 include/configs/MPC8540EVAL.h
Kumar Gala - Jan. 5, 2011, 12:11 a.m.
On Dec 13, 2010, at 10:12 PM, Kumar Gala wrote:

> The MPC8540EVAL board is no longer maintained and thus we are removing
> support for it.
> 
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> board/mpc8540eval/Makefile      |   54 ---
> board/mpc8540eval/ddr.c         |   73 ----
> board/mpc8540eval/flash.c       |  894 ---------------------------------------
> board/mpc8540eval/law.c         |   54 ---
> board/mpc8540eval/mpc8540eval.c |  230 ----------
> board/mpc8540eval/tlb.c         |   78 ----
> boards.cfg                      |    5 -
> include/configs/MPC8540EVAL.h   |  362 ----------------
> 8 files changed, 0 insertions(+), 1750 deletions(-)
> delete mode 100644 board/mpc8540eval/Makefile
> delete mode 100644 board/mpc8540eval/ddr.c
> delete mode 100644 board/mpc8540eval/flash.c
> delete mode 100644 board/mpc8540eval/law.c
> delete mode 100644 board/mpc8540eval/mpc8540eval.c
> delete mode 100644 board/mpc8540eval/tlb.c
> delete mode 100644 include/configs/MPC8540EVAL.h

applied to 85xx

- k

Patch

diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
deleted file mode 100644
index 5eccfab..0000000
--- a/board/mpc8540eval/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@ 
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-y	+= $(BOARD).o
-COBJS-y	+= law.o
-COBJS-y	+= tlb.o
-COBJS-y	+= flash.o
-COBJS-$(CONFIG_FSL_DDR1) += ddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8540eval/ddr.c b/board/mpc8540eval/ddr.c
deleted file mode 100644
index 7850794..0000000
--- a/board/mpc8540eval/ddr.c
+++ /dev/null
@@ -1,73 +0,0 @@ 
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-static void
-get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
-{
-	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
-}
-
-
-unsigned int
-fsl_ddr_get_mem_data_rate(void)
-{
-	return get_ddr_freq(0);
-}
-
-
-void
-fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0 && i == 0) {
-			i2c_address = SPD_EEPROM_ADDRESS;
-		}
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 0;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
deleted file mode 100644
index 9df5bd9..0000000
--- a/board/mpc8540eval/flash.c
+++ /dev/null
@@ -1,894 +0,0 @@ 
-/*
- * (C) Copyright 2003 Motorola Inc.
- *  Xianghua Xiao,(X.Xiao@motorola.com)
- *
- * (C) Copyright 2000, 2001
- *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Add support the Sharp chips on the mpc8260ads.
- * I started with board/ip860/flash.c and made changes I found in
- * the MTD project by David Schleef.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*
- * The variable should be in the flash info structure. Since it
- * is only used in this board specific file it is declared here.
- * In the future I think an endian flag should be part of the
- * flash_info_t structure. (Ron Alder)
- */
-static ulong big_endian = 0;
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_block (flash_info_t *info, uchar * src, ulong dest, ulong cnt);
-static int write_short (flash_info_t *info, ulong dest, ushort data);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static int clear_block_lock_bit(flash_info_t *info, vu_long * addr);
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size;
-	int i;
-
-	/* Init: enable write,
-	 * or we cannot even write flash commands
-	 */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-		/* set the default sector offset */
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-	}
-
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size;
-
-#if !defined(CONFIG_RAM_AS_FLASH)
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-#endif
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
-				break;
-	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
-				break;
-	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
-				break;
-	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
-				break;
-	case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
- /* only deal with 16 bit and 32 bit port width, 16bit chip */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value,va,vb,vc,vd;
-	ulong base = (ulong)addr;
-	ulong sector_offset;
-
-#ifdef DEBUG
-	printf("Check flash at 0x%08x\n",(uint)addr);
-#endif
-	/* Write "Intelligent Identifier" command: read Manufacturer ID */
-	*addr = 0x90909090;
-	udelay(20);
-	asm("sync");
-
-#ifndef CONFIG_SYS_FLASH_CFI
-	printf("Not define CONFIG_SYS_FLASH_CFI\n");
-	return (0);
-#else
-	value = addr[0];
-	va=(value & 0xFF000000)>>24;
-	vb=(value & 0x00FF0000)>>16;
-	vc=(value & 0x0000FF00)>>8;
-	vd=(value & 0x000000FF);
-	if ((va==0) && (vb==0)) {
-		printf("cannot identify Flash\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-	else if ((va==0) && (vb!=0)) {
-		big_endian = 1;
-		info->chipwidth = FLASH_CFI_BY16;
-		if(vb == vd) info->portwidth = FLASH_CFI_32BIT;
-		else info->portwidth = FLASH_CFI_16BIT;
-	}
-	else if ((va!=0) && (vb==0)) {
-		big_endian = 0;
-		info->chipwidth = FLASH_CFI_BY16;
-		if(va == vc) info->portwidth = FLASH_CFI_32BIT;
-		else info->portwidth = FLASH_CFI_16BIT;
-	}
-	else if ((va!=0) && (vb!=0)) {
-		big_endian = 1;		/* no meaning for 8bit chip */
-		info->chipwidth = FLASH_CFI_BY8;
-		if(va == vb) info->portwidth = FLASH_CFI_16BIT;
-		else info->portwidth = FLASH_CFI_8BIT;
-	}
-#ifdef DEBUG
-	switch (info->portwidth) {
-		case FLASH_CFI_8BIT:
-			printf("port width is 8 bit.\n");
-			break;
-		case FLASH_CFI_16BIT:
-			printf("port width is 16 bit, ");
-			break;
-		case FLASH_CFI_32BIT:
-			printf("port width is 32 bit, ");
-			break;
-	}
-	switch (info->chipwidth) {
-		case FLASH_CFI_BY16:
-			printf("chip width is 16 bit, ");
-			switch (big_endian) {
-				case 0:
-					printf("Little Endian.\n");
-					break;
-				case 1:
-					printf("Big Endian.\n");
-					break;
-			}
-			break;
-	}
-#endif
-#endif		/*#ifdef CONFIG_SYS_FLASH_CFI*/
-
-	if (big_endian==0) value = (addr[0] & 0xFF000000) >>8;
-	else value = (addr[0] & 0x00FF0000);
-#ifdef DEBUG
-	printf("manufacturer=0x%x\n",(uint)(value>>16));
-#endif
-	switch (value) {
-	case MT_MANUFACT & 0xFFFF0000:	/* SHARP, MT or => Intel */
-	case INTEL_ALT_MANU & 0xFFFF0000:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		printf("unknown manufacturer: %x\n", (unsigned int)value);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	if (info->portwidth==FLASH_CFI_16BIT) {
-		switch (big_endian) {
-			case 0:
-				value = (addr[0] & 0x0000FF00)>>8;
-				break;
-			case 1:
-				value = (addr[0] & 0x000000FF);
-				break;
-		}
-	}
-	else if (info->portwidth == FLASH_CFI_32BIT) {
-		switch (big_endian) {
-			case 0:
-				value = (addr[1] & 0x0000FF00)>>8;
-				break;
-			case 1:
-				value = (addr[1] & 0x000000FF);
-				break;
-		}
-	}
-
-#ifdef DEBUG
-	printf("deviceID=0x%x\n",(uint)value);
-#endif
-	switch (value) {
-	case (INTEL_ID_28F016S & 0x0000FFFF):
-		info->flash_id += FLASH_28F016SV;
-		info->sector_count = 32;
-		sector_offset = 0x10000;
-		break;				/* => 2 MB		*/
-
-	case (INTEL_ID_28F160S3 & 0x0000FFFF):
-		info->flash_id += FLASH_28F160S3;
-		info->sector_count = 32;
-		sector_offset = 0x10000;
-		break;				/* => 2 MB		*/
-
-	case (INTEL_ID_28F320S3 & 0x0000FFFF):
-		info->flash_id += FLASH_28F320S3;
-		info->sector_count = 64;
-		sector_offset = 0x10000;
-		break;				/* => 4 MB		*/
-
-	case (INTEL_ID_28F640J3A & 0x0000FFFF):
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		sector_offset = 0x20000;
-		break;                          /* => 8 MB             */
-
-	case SHARP_ID_28F016SCL & 0x0000FFFF:
-	case SHARP_ID_28F016SCZ & 0x0000FFFF:
-		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
-		info->sector_count  = 32;
-		sector_offset = 0x10000;
-		break;				/* => 2 MB		*/
-
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	sector_offset = sector_offset * (info->portwidth / info->chipwidth);
-	info->size = info->sector_count * sector_offset;
-
-	/* set up sector start address table */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = base;
-		base += sector_offset;
-		/* don't know how to check sector protection */
-		info->protect[i] = 0;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (vu_long *)info->start[0];
-		*addr = 0xFFFFFF;	/* reset bank to read array mode */
-		asm("sync");
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last, ready, erase_err_status;
-
-	if (big_endian == 1) {
-		ready = 0x0080;
-		erase_err_status = 0x00a0;
-	}
-	else {
-		ready = 0x8000;
-		erase_err_status = 0xa000;
-	}
-	if ((info->portwidth / info->chipwidth)==2) {
-		ready += (ready <<16);
-		erase_err_status += (erase_err_status <<16);
-	}
-
-#ifdef DEBUG
-	printf ("\nReady flag is 0x%lx\nErase error flag is 0x%lx", ready, erase_err_status);
-#endif
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
-	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-#ifdef DEBUG
-	printf("\nFlash Erase:\n");
-#endif
-	/* Make Sure Block Lock Bit is not set. */
-	if(clear_block_lock_bit(info, (vu_long *)(info->start[s_first]))){
-		return 1;
-	}
-
-	/* Start erase on unprotected sectors */
-#if defined(DEBUG)
-	printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
-#endif
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_short *addr16 = (vu_short *)(info->start[sect]);
-			vu_long *addr   = (vu_long *)(info->start[sect]);
-			printf(".");
-			switch (info->portwidth) {
-				case FLASH_CFI_16BIT:
-					asm("sync");
-					last = start = get_timer (0);
-					/* Disable interrupts which might cause a timeout here */
-					flag = disable_interrupts();
-					/* Reset Array */
-					*addr16 = 0xffff;
-					asm("sync");
-					/* Clear Status Register */
-					*addr16 = 0x5050;
-					asm("sync");
-					/* Single Block Erase Command */
-					*addr16 = 0x2020;
-					asm("sync");
-					/* Confirm */
-					*addr16 = 0xD0D0;
-					asm("sync");
-					if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
-					    /* Resume Command, as per errata update */
-					    *addr16 = 0xD0D0;
-					    asm("sync");
-					}
-					/* re-enable interrupts if necessary */
-					if (flag)
-						enable_interrupts();
-					/* wait at least 80us - let's wait 1 ms */
-					*addr16 = 0x7070;
-					udelay (1000);
-					while ((*addr16 & ready) != ready) {
-						if((*addr16 & erase_err_status)== erase_err_status){
-							printf("Error in Block Erase - Lock Bit may be set!\n");
-							printf("Status Register = 0x%X\n", (uint)*addr16);
-							*addr16 = 0xFFFF;	/* reset bank */
-							asm("sync");
-							return 1;
-						}
-						if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-							printf ("Timeout\n");
-							*addr16 = 0xFFFF;	/* reset bank */
-							asm("sync");
-							return 1;
-						}
-						/* show that we're waiting */
-						if ((now - last) > 1000) {	/* every second */
-							putc ('.');
-							last = now;
-						}
-					}
-					/* reset to read mode */
-					*addr16 = 0xFFFF;
-					asm("sync");
-					break;
-				case FLASH_CFI_32BIT:
-					asm("sync");
-					last = start = get_timer (0);
-					/* Disable interrupts which might cause a timeout here */
-					flag = disable_interrupts();
-					/* Reset Array */
-					*addr = 0xffffffff;
-					asm("sync");
-					/* Clear Status Register */
-					*addr = 0x50505050;
-					asm("sync");
-					/* Single Block Erase Command */
-					*addr = 0x20202020;
-					asm("sync");
-					/* Confirm */
-					*addr = 0xD0D0D0D0;
-					asm("sync");
-					if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
-					    /* Resume Command, as per errata update */
-					    *addr = 0xD0D0D0D0;
-					    asm("sync");
-					}
-					/* re-enable interrupts if necessary */
-					if (flag)
-						enable_interrupts();
-					/* wait at least 80us - let's wait 1 ms */
-					*addr = 0x70707070;
-					udelay (1000);
-					while ((*addr & ready) != ready) {
-						if((*addr & erase_err_status)==erase_err_status){
-							printf("Error in Block Erase - Lock Bit may be set!\n");
-							printf("Status Register = 0x%X\n", (uint)*addr);
-							*addr = 0xFFFFFFFF;	/* reset bank */
-							asm("sync");
-							return 1;
-						}
-						if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-							printf ("Timeout\n");
-							*addr = 0xFFFFFFFF;	/* reset bank */
-							asm("sync");
-							return 1;
-						}
-						/* show that we're waiting */
-						if ((now - last) > 1000) {	/* every second */
-							putc ('.');
-							last = now;
-						}
-					}
-					/* reset to read mode */
-					*addr = 0xFFFFFFFF;
-					asm("sync");
-					break;
-			}	/* end switch */
-		}		/* end if */
-	}			/* end for */
-
-	printf ("flash erase done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-#define FLASH_BLOCK_SIZE 32
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data, count, temp;
-/*	ulong temp[FLASH_BLOCK_SIZE/4];*/
-	int i, l, rc;
-
-	count = cnt;
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	cp = wp;
-	/* handle unaligned block bytes , flash block size = 16bytes */
-	wp = (cp+FLASH_BLOCK_SIZE-1) & ~(FLASH_BLOCK_SIZE-1);
-	if ((wp-cp)>=cnt) {
-		if ((rc = write_block(info,src,cp,wp-cp)) !=0)
-			return (rc);
-		src += wp-cp;
-		cnt -= wp-cp;
-	}
-	/* handle aligned block bytes */
-	temp = 0;
-	printf("\n");
-	while ( cnt >= FLASH_BLOCK_SIZE) {
-		if ((rc = write_block(info,src,cp,FLASH_BLOCK_SIZE)) !=0) {
-			return (rc);
-		}
-		src += FLASH_BLOCK_SIZE;
-		cp += FLASH_BLOCK_SIZE;
-		cnt -= FLASH_BLOCK_SIZE;
-		if (((count-cnt)>>10)>temp) {
-			temp=(count-cnt)>>10;
-			printf("\r%lu KB",temp);
-		}
-	}
-	printf("\n");
-	wp = cp;
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-#undef FLASH_BLOCK_SIZE
-
-/*-----------------------------------------------------------------------
- * Write block to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * -1  Error
- */
-static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt)
-{
-	vu_short *baddr, *addr = (vu_short *)dest;
-	ushort data;
-	ulong start, now, xsr,csr, ready;
-	int flag;
-
-	if (cnt==0) return 0;
-	else if(cnt != (cnt& ~1)) return -1;
-
-	/* Check if Flash is (sufficiently) erased */
-	data = * src;
-	data = (data<<8) | *(src+1);
-	if ((*addr & data) != data) {
-		return (2);
-	}
-	if (big_endian == 1) {
-		ready = 0x0080;
-	}
-	else {
-		ready = 0x8000;
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-		do {
-			/* Write Command */
-			*addr = 0xe8e8;
-			asm("sync");
-			xsr = *addr;
-			asm("sync");
-		} while (!(xsr & ready));	/*wait until read */
-		/*write count=BLOCK SIZE -1 */
-		data=(cnt>>1)-1;
-		data=(data<<8)|data;
-		*addr = data;		/* word mode, cnt/2 */
-		asm("sync");
-		baddr = addr;
-		while(cnt) {
-			data = * src++;
-			data = (data<<8) | *src++;
-			asm("sync");
-			*baddr = data;
-			asm("sync");
-			++baddr;
-			cnt = cnt -2;
-		}
-		*addr = 0xd0d0;			/* confirm write */
-		start = get_timer(0);
-		asm("sync");
-		if (flag)
-			enable_interrupts();
-		/* data polling for D7 */
-		flag  = 0;
-		while (((csr = *addr) & ready) != ready) {
-			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				flag = 1;
-				break;
-			}
-		}
-		if (csr & 0x4040) {
-			printf ("CSR indicates write error (%04lx) at %08lx\n",
-				csr, (ulong)addr);
-			flag = 1;
-		}
-		/* Clear Status Registers Command */
-		*addr = 0x5050;
-		asm("sync");
-		/* Reset to read array mode */
-		*addr = 0xFFFF;
-		asm("sync");
-	return (flag);
-}
-
-
-/*-----------------------------------------------------------------------
- * Write a short word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_short (flash_info_t *info, ulong dest, ushort data)
-{
-	vu_short *addr = (vu_short *)dest;
-	ulong start, now, csr, ready;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-		/* Write Command */
-		*addr = 0x1010;
-		start = get_timer (0);
-		asm("sync");
-		/* Write Data */
-		*addr = data;
-		asm("sync");
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-		if (big_endian == 1) {
-			ready = 0x0080;
-		}
-		else {
-			ready = 0x8000;
-		}
-		/* data polling for D7 */
-		flag  = 0;
-		while (((csr = *addr) & ready) != ready) {
-			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				flag = 1;
-				break;
-			}
-		}
-		if (csr & 0x4040) {
-			printf ("CSR indicates write error (%04lx) at %08lx\n",
-				csr, (ulong)addr);
-			flag = 1;
-		}
-		/* Clear Status Registers Command */
-		*addr = 0x5050;
-		asm("sync");
-		/* Reset to read array mode */
-		*addr = 0xFFFF;
-		asm("sync");
-	return (flag);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)dest;
-	ulong start, csr, ready;
-	int flag=0;
-
-	switch (info->portwidth) {
-	case FLASH_CFI_32BIT:
-		/* Check if Flash is (sufficiently) erased */
-		if ((*addr & data) != data) {
-			return (2);
-		}
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		if (big_endian == 1) {
-			ready = 0x0080;
-		}
-		else {
-			ready = 0x8000;
-		}
-		if ((info->portwidth / info->chipwidth)==2) {
-			ready += (ready <<16);
-		}
-		else {
-			ready = ready << 16;
-		}
-		/* Write Command */
-		*addr = 0x10101010;
-		asm("sync");
-		/* Write Data */
-		*addr = data;
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-		/* data polling for D7 */
-		start = get_timer (0);
-		flag  = 0;
-		while (((csr = *addr) & ready) != ready) {
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				flag = 1;
-				break;
-			}
-		}
-		if (csr & 0x40404040) {
-			printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
-			flag = 1;
-		}
-		/* Clear Status Registers Command */
-		*addr = 0x50505050;
-		asm("sync");
-		/* Reset to read array mode */
-		*addr = 0xFFFFFFFF;
-		asm("sync");
-		break;
-	case FLASH_CFI_16BIT:
-		flag = write_short (info, dest,  (unsigned short) (data>>16));
-		if (flag == 0)
-			flag = write_short (info, dest+2,  (unsigned short) (data));
-		break;
-	}
-	return (flag);
-}
-
-/*-----------------------------------------------------------------------
- * Clear Block Lock Bit, returns:
- * 0 - OK
- * 1 - Timeout
- */
-
-static int clear_block_lock_bit(flash_info_t * info, vu_long  * addr)
-{
-	ulong start, now, ready;
-
-	/* Reset Array */
-	*addr = 0xffffffff;
-	asm("sync");
-	/* Clear Status Register */
-	*addr = 0x50505050;
-	asm("sync");
-
-	*addr = 0x60606060;
-	asm("sync");
-	*addr = 0xd0d0d0d0;
-	asm("sync");
-
-
-	if (big_endian == 1) {
-		ready = 0x0080;
-	}
-	else {
-		ready = 0x8000;
-	}
-	if ((info->portwidth / info->chipwidth)==2) {
-		ready += (ready <<16);
-	}
-	else {
-		ready = ready << 16;
-	}
-#ifdef DEBUG
-	printf ("%s: Ready flag is 0x%8lx\n", __FUNCTION__, ready);
-#endif
-	*addr = 0x70707070;	/* read status */
-	start = get_timer (0);
-	while((*addr & ready) != ready){
-		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout on clearing Block Lock Bit\n");
-			*addr = 0xFFFFFFFF;	/* reset bank */
-			asm("sync");
-			return 1;
-		}
-	}
-	return 0;
-}
-
-#endif /* !CONFIG_SYS_NO_FLASH */
diff --git a/board/mpc8540eval/law.c b/board/mpc8540eval/law.c
deleted file mode 100644
index 9926d25..0000000
--- a/board/mpc8540eval/law.c
+++ /dev/null
@@ -1,54 +0,0 @@ 
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(128M) -or- larger
- * f000_0000-f3ff_ffff: PCI(256M)
- * f400_0000-f7ff_ffff: RapidIO(128M)
- * f800_0000-ffff_ffff: localbus(128M)
- *   f800_0000-fbff_ffff: LBC SDRAM(64M)
- *   fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
- *   fdf0_0000-fdff_ffff: CCSRBAR(1M)
- *   fe00_0000-ffff_ffff: Flash(32M)
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- *       Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-struct law_entry law_table[] = {
-#ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
-#endif
-	SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-#ifndef CONFIG_RAM_AS_FLASH
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
deleted file mode 100644
index 054d644..0000000
--- a/board/mpc8540eval/mpc8540eval.c
+++ /dev/null
@@ -1,230 +0,0 @@ 
-/*
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <spd_sdram.h>
-
-long int fixed_sdram (void);
-
-int board_pre_init (void)
-{
-#if defined(CONFIG_PCI)
-	volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
-
-	pci->peer &= 0xffffffdf; /* disable master abort */
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-
-	get_sys_info (&sysinfo);
-
-	printf ("Board: Freescale MPC8540EVAL Board\n");
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor[0] / 1000000);
-	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
-	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
-	if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
-		|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
-		printf ("\tLBC: %lu MHz\n",
-			sysinfo.freqSystemBus / 1000000/(CONFIG_SYS_LBC_LCRR & 0x0f));
-	} else {
-		printf("\tLBC: unknown\n");
-	}
-	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
-	return (0);
-}
-
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if !defined(CONFIG_RAM_AS_FLASH)
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	sys_info_t sysinfo;
-	uint temp_lbcdll = 0;
-#endif
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-
-#if defined(CONFIG_DDR_DLL)
-	uint temp_ddrdll = 0;
-
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	return dram_size;
-#endif
-
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
-	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) {
-		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
-	} else {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
-		udelay(200);
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
-	asm("sync");
-	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
-	asm("sync");
-	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
-	asm("sync");
-	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
-	asm("sync");
-	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
-	asm("sync");
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	asm("sync");
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("sync");
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-		dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	return dram_size;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-long int fixed_sdram (void)
-{
-#ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-#if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-#endif
-	asm("sync;isync;msync");
-	udelay(500);
-#if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
-#else
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-#endif
-	asm("sync; isync; msync");
-	udelay(500);
-#endif
-	return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024);
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-int board_eth_init(bd_t *bis)
-{
-	/*
-	 * This board either has PCI NICs or uses the CPU's TSECs
-	 * pci_eth_init() will return 0 if no NICs found, so in that case
-	 * returning -1 will force cpu_eth_init() to be called.
-	 */
-	int num = pci_eth_init(bis);
-	return (num <= 0 ? -1 : num);
-}
diff --git a/board/mpc8540eval/tlb.c b/board/mpc8540eval/tlb.c
deleted file mode 100644
index 06092f8..0000000
--- a/board/mpc8540eval/tlb.c
+++ /dev/null
@@ -1,78 +0,0 @@ 
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-  #if defined(CONFIG_SYS_FLASH_PORT_WIDTH_16)
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_4M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x400000, CONFIG_SYS_FLASH_BASE + 0x400000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_4M, 1),
-  #else
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_16M, 1),
-  #endif
-
-  #if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 4, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 5, BOOKE_PAGESZ_64M, 1),
-  #endif
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
-  #if defined(CONFIG_RAM_AS_FLASH)
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-  #else
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-  #endif
-		      0, 6, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 9, BOOKE_PAGESZ_16K, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/boards.cfg b/boards.cfg
index ec4f663..34697cc 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -436,11 +436,6 @@  MVBLM7                       powerpc     mpc83xx     mvblm7              matrix_
 SIMPC8313_LP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_LP
 SIMPC8313_SP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_SP
 TQM834x                      powerpc     mpc83xx     tqm834x             tqc
-MPC8540EVAL                  powerpc     mpc85xx     mpc8540eval         -              -           MPC8540EVAL:SYSCLK_66M
-MPC8540EVAL_33               powerpc     mpc85xx     mpc8540eval         -              -           MPC8540EVAL
-MPC8540EVAL_33_slave         powerpc     mpc85xx     mpc8540eval         -              -           MPC8540EVAL:PCI_SLAVE
-MPC8540EVAL_66               powerpc     mpc85xx     mpc8540eval         -              -           MPC8540EVAL:SYSCLK_66M
-MPC8540EVAL_66_slave         powerpc     mpc85xx     mpc8540eval         -              -           MPC8540EVAL:SYSCLK_66M,PCI_SLAVE
 PM854                        powerpc     mpc85xx     pm854
 PM856                        powerpc     mpc85xx     pm856
 sbc8540                      powerpc     mpc85xx     sbc8560             -              -           SBC8540
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
deleted file mode 100644
index a968949..0000000
--- a/include/configs/MPC8540EVAL.h
+++ /dev/null
@@ -1,362 +0,0 @@ 
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Modified by Lunsheng Wang, lunsheng@sohu.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* mpc8540eval board configuration file */
-/* please refer to doc/README.mpc85xxads for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	    /* BOOKE			*/
-#define CONFIG_E500		1	    /* BOOKE e500 family	*/
-#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
-#define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
-#define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff80000
-
-#undef  CONFIG_PCI			    /* pci ethernet support	*/
-#define CONFIG_TSEC_ENET		    /* tsec ethernet support  */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
- * Not availabe for EVAL board
- */
-#undef CONFIG_RAM_AS_FLASH
-
-/* sysclk for MPC8540EVAL */
-#if defined(CONFIG_SYSCLK_66M)
-	/*
-	 * the oscillator on board is 66Mhz
-	 * can also get 66M clock from external PCI
-	 */
-	#define CONFIG_SYS_CLK_FREQ   66000000
-#else
-	#define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
-#undef  CONFIG_BTB			    /* toggle branch predition */
-
-#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
-
-#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time  */
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
-#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
-#endif
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
-#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
-
-#define CONFIG_SYS_SDRAM_SIZE		256             /* DDR is now 256MB     */
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-#else
-#define CONFIG_SYS_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
-#define CONFIG_SYS_BR0_PRELIM          0xf8001801      /* port size 32bit */
-#else /* Boot from real Flash */
-#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
-#define CONFIG_SYS_BR0_PRELIM		0xff801001	/* port size 16bit	*/
-#endif
-
-#define	CONFIG_SYS_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device   */
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
-#define CONFIG_SYS_FLASH_CFI		1
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef  CONFIG_SYS_RAMBOOT
-#endif
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
-
-#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/* local bus definitions */
-#define CONFIG_SYS_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
-#define CONFIG_SYS_OR2_PRELIM		0xfc006901
-#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq divider*/
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-#define CONFIG_SYS_LBC_LSRT		0x20000000
-#define CONFIG_SYS_LBC_MRTPR		0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
-
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
-#else
-#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
-#endif
-#define CONFIG_SYS_OR4_PRELIM          0xffffe1f1
-#define CONFIG_SYS_BCSR                (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-/* General PCI */
-#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCI_MEM_SIZE	0x20000000
-#define CONFIG_SYS_PCI_IO_BASE         0xe2000000
-
-#if defined(CONFIG_PCI)
-#define CONFIG_NET_MULTI
-#undef CONFIG_EEPRO100
-#define CONFIG_TULIP
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-#if !defined(CONFIG_PCI_PNP)
-#define PCI_ENET0_IOADDR      0xe0000000
-#define PCI_ENET0_MEMADDR     0xe0000000
-#define PCI_IDSEL_NUMBER      0x0c	/*slot0->3(IDSEL)=12->15*/
-#endif
-#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0008
-#elif defined(CONFIG_TSEC_ENET)
-#define CONFIG_NET_MULTI	1
-#define CONFIG_MII		1	/* MII PHY management	*/
-#define CONFIG_TSEC1    1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME      "TSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME      "TSEC1"
-#define CONFIG_MPC85XX_FEC      1
-#define CONFIG_HAS_ETH2
-#define CONFIG_MPC85XX_FEC_NAME                "FEC"
-#define TSEC1_PHY_ADDR          7
-#define	TSEC2_PHY_ADDR		4
-#define FEC_PHY_ADDR            2
-#define TSEC1_PHYIDX            0
-#define TSEC2_PHYIDX            0
-#define FEC_PHYIDX              0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define FEC_FLAGS		0
-
-/* Options are: TSEC[0-1], FEC */
-#define CONFIG_ETHPRIME                "TSEC0"
-
-#define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
-#define INTEL_LXT971_PHY	1
-#endif
-
-/* Environment */
-#ifndef CONFIG_SYS_RAMBOOT
-#if defined(CONFIG_RAM_AS_FLASH)
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x100000)
-#define CONFIG_ENV_SIZE		0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#endif
-#define CONFIG_ENV_SIZE		0x2000
-#else
-/* #define CONFIG_SYS_NO_FLASH		1 */	/* Flash is not usable now	*/
-#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*****************************/
-/* Environment Configuration */
-/*****************************/
-/* The mac addresses for all ethernet interface */
-/* NOTE: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR  00:01:af:07:9b:8a
-#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
-#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
-#endif
-
-#define CONFIG_ROOTPATH  /nfsroot
-#define CONFIG_BOOTFILE  your.uImage
-
-#define CONFIG_SERVERIP         192.168.101.1
-#define CONFIG_IPADDR           192.168.101.11
-#define CONFIG_GATEWAYIP        192.168.101.0
-#define CONFIG_NETMASK          255.255.255.0
-
-#define CONFIG_LOADADDR  200000   /* default location for tftp and bootm */
-
-#define CONFIG_HOSTNAME         MPC8540EVAL
-
-#endif	/* __CONFIG_H */