| Message ID | 20170424215022.30382-2-eric@anholt.net |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 04/24/2017 02:50 PM, Eric Anholt wrote: > Cygnus is a small family of SoCs, of which we currently have > devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the > same as 58xx, just requiring a tiny bit of setup that was previously > missing. > > Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Minor comment in line On 17-04-24 02:50 PM, Eric Anholt wrote: > Cygnus is a small family of SoCs, of which we currently have > devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the > same as 58xx, just requiring a tiny bit of setup that was previously > missing. > > Signed-off-by: Eric Anholt <eric@anholt.net> > --- > Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ > drivers/net/dsa/b53/b53_srab.c | 2 ++ > 2 files changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt > index d6c6e41648d4..49c93d3c0839 100644 > --- a/Documentation/devicetree/bindings/net/dsa/b53.txt > +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt > @@ -29,6 +29,9 @@ Required properties: > "brcm,bcm58625-srab" > "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string > > + For the BCM11360 SoC, must be: > + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string > + place in alphabetical order in the doc? > For the BCM63xx/33xx SoCs with an integrated switch, must be one of: > "brcm,bcm3384-switch" > "brcm,bcm6328-switch" > diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c > index 8a62b6a69703..c37ffd1b6833 100644 > --- a/drivers/net/dsa/b53/b53_srab.c > +++ b/drivers/net/dsa/b53/b53_srab.c > @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { > { .compatible = "brcm,bcm53018-srab" }, > { .compatible = "brcm,bcm53019-srab" }, > { .compatible = "brcm,bcm5301x-srab" }, > + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, > @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { > { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, > + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { /* sentinel */ }, > }; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eric A comment on the Device ID. On 17-04-24 02:50 PM, Eric Anholt wrote: > Cygnus is a small family of SoCs, of which we currently have > devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the > same as 58xx, just requiring a tiny bit of setup that was previously > missing. > > Signed-off-by: Eric Anholt <eric@anholt.net> > --- > Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ > drivers/net/dsa/b53/b53_srab.c | 2 ++ > 2 files changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt > index d6c6e41648d4..49c93d3c0839 100644 > --- a/Documentation/devicetree/bindings/net/dsa/b53.txt > +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt > @@ -29,6 +29,9 @@ Required properties: > "brcm,bcm58625-srab" > "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string > > + For the BCM11360 SoC, must be: > + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string > + > For the BCM63xx/33xx SoCs with an integrated switch, must be one of: > "brcm,bcm3384-switch" > "brcm,bcm6328-switch" > diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c > index 8a62b6a69703..c37ffd1b6833 100644 > --- a/drivers/net/dsa/b53/b53_srab.c > +++ b/drivers/net/dsa/b53/b53_srab.c > @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { > { .compatible = "brcm,bcm53018-srab" }, > { .compatible = "brcm,bcm53019-srab" }, > { .compatible = "brcm,bcm5301x-srab" }, > + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, > @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { > { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, > + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, The device ID should be 0xd300. This is the actual value read from the switch regs. This also requires an entry in the 'b53_switch_chips' structure in b53_common.c. > { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, > { /* sentinel */ }, > }; Other wise this patch set looks good. I was testing a similar change (except for the above, which doesn't affect the functionality) to get the switch working and it works. Thanks Arun -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/24/2017 04:03 PM, Arun Parameswaran wrote: > Hi Eric > > A comment on the Device ID. > > > On 17-04-24 02:50 PM, Eric Anholt wrote: >> Cygnus is a small family of SoCs, of which we currently have >> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the >> same as 58xx, just requiring a tiny bit of setup that was previously >> missing. >> >> Signed-off-by: Eric Anholt <eric@anholt.net> >> --- >> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ >> drivers/net/dsa/b53/b53_srab.c | 2 ++ >> 2 files changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt >> index d6c6e41648d4..49c93d3c0839 100644 >> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt >> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt >> @@ -29,6 +29,9 @@ Required properties: >> "brcm,bcm58625-srab" >> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string >> >> + For the BCM11360 SoC, must be: >> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string >> + >> For the BCM63xx/33xx SoCs with an integrated switch, must be one of: >> "brcm,bcm3384-switch" >> "brcm,bcm6328-switch" >> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c >> index 8a62b6a69703..c37ffd1b6833 100644 >> --- a/drivers/net/dsa/b53/b53_srab.c >> +++ b/drivers/net/dsa/b53/b53_srab.c >> @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { >> { .compatible = "brcm,bcm53018-srab" }, >> { .compatible = "brcm,bcm53019-srab" }, >> { .compatible = "brcm,bcm5301x-srab" }, >> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { >> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, > The device ID should be 0xd300. This is the actual value read from the switch regs. > This also requires an entry in the 'b53_switch_chips' structure in b53_common.c. These are not real ID numbers, these are values that indicate the generation of the switch being embedded into the SoC. Within b53_common.c we don't have to differentiate a Starfighter 2 embedded in BCM11360, NSP, or 7445 or 7278, which is why using 58XX_DEVICE_ID should be good enough. >> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> { /* sentinel */ }, >> }; > Other wise this patch set looks good. > > I was testing a similar change (except for the above, which doesn't > affect the functionality) to get the switch working and it works. > > Thanks > Arun >
On 17-04-24 04:07 PM, Florian Fainelli wrote: > On 04/24/2017 04:03 PM, Arun Parameswaran wrote: >> Hi Eric >> >> A comment on the Device ID. >> >> >> On 17-04-24 02:50 PM, Eric Anholt wrote: >>> Cygnus is a small family of SoCs, of which we currently have >>> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the >>> same as 58xx, just requiring a tiny bit of setup that was previously >>> missing. >>> >>> Signed-off-by: Eric Anholt <eric@anholt.net> >>> --- >>> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ >>> drivers/net/dsa/b53/b53_srab.c | 2 ++ >>> 2 files changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt >>> index d6c6e41648d4..49c93d3c0839 100644 >>> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt >>> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt >>> @@ -29,6 +29,9 @@ Required properties: >>> "brcm,bcm58625-srab" >>> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string >>> >>> + For the BCM11360 SoC, must be: >>> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string >>> + >>> For the BCM63xx/33xx SoCs with an integrated switch, must be one of: >>> "brcm,bcm3384-switch" >>> "brcm,bcm6328-switch" >>> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c >>> index 8a62b6a69703..c37ffd1b6833 100644 >>> --- a/drivers/net/dsa/b53/b53_srab.c >>> +++ b/drivers/net/dsa/b53/b53_srab.c >>> @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { >>> { .compatible = "brcm,bcm53018-srab" }, >>> { .compatible = "brcm,bcm53019-srab" }, >>> { .compatible = "brcm,bcm5301x-srab" }, >>> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { >>> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, >> The device ID should be 0xd300. This is the actual value read from the switch regs. >> This also requires an entry in the 'b53_switch_chips' structure in b53_common.c. > These are not real ID numbers, these are values that indicate the > generation of the switch being embedded into the SoC. Within > b53_common.c we don't have to differentiate a Starfighter 2 embedded in > BCM11360, NSP, or 7445 or 7278, which is why using 58XX_DEVICE_ID should > be good enough. Ok. Thanks. I was under the impression, that these id's could be used in the b53_switch_detect() API to auto detect the switch. In that API, the switch ID is read from the Management page register. >>> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> { /* sentinel */ }, >>> }; >> Other wise this patch set looks good. >> >> I was testing a similar change (except for the above, which doesn't >> affect the functionality) to get the switch working and it works. >> >> Thanks >> Arun >> > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/24/2017 04:15 PM, Arun Parameswaran wrote: > > > On 17-04-24 04:07 PM, Florian Fainelli wrote: >> On 04/24/2017 04:03 PM, Arun Parameswaran wrote: >>> Hi Eric >>> >>> A comment on the Device ID. >>> >>> >>> On 17-04-24 02:50 PM, Eric Anholt wrote: >>>> Cygnus is a small family of SoCs, of which we currently have >>>> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the >>>> same as 58xx, just requiring a tiny bit of setup that was previously >>>> missing. >>>> >>>> Signed-off-by: Eric Anholt <eric@anholt.net> >>>> --- >>>> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ >>>> drivers/net/dsa/b53/b53_srab.c | 2 ++ >>>> 2 files changed, 5 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt >>>> index d6c6e41648d4..49c93d3c0839 100644 >>>> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt >>>> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt >>>> @@ -29,6 +29,9 @@ Required properties: >>>> "brcm,bcm58625-srab" >>>> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string >>>> >>>> + For the BCM11360 SoC, must be: >>>> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string >>>> + >>>> For the BCM63xx/33xx SoCs with an integrated switch, must be one of: >>>> "brcm,bcm3384-switch" >>>> "brcm,bcm6328-switch" >>>> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c >>>> index 8a62b6a69703..c37ffd1b6833 100644 >>>> --- a/drivers/net/dsa/b53/b53_srab.c >>>> +++ b/drivers/net/dsa/b53/b53_srab.c >>>> @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { >>>> { .compatible = "brcm,bcm53018-srab" }, >>>> { .compatible = "brcm,bcm53019-srab" }, >>>> { .compatible = "brcm,bcm5301x-srab" }, >>>> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { >>>> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>>> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, >>> The device ID should be 0xd300. This is the actual value read from the switch regs. >>> This also requires an entry in the 'b53_switch_chips' structure in b53_common.c. >> These are not real ID numbers, these are values that indicate the >> generation of the switch being embedded into the SoC. Within >> b53_common.c we don't have to differentiate a Starfighter 2 embedded in >> BCM11360, NSP, or 7445 or 7278, which is why using 58XX_DEVICE_ID should >> be good enough. > Ok. Thanks. > > I was under the impression, that these id's could be used in the b53_switch_detect() > API to auto detect the switch. In that API, the switch ID is read from the > Management page register. For external switches that is the case, but for internal/integrated switches, the ID is not always representative of the switch. This is why the choice of a chip-type ID was used here while adding support for NSP to the b53 driver.
Scott Branden <scott.branden@broadcom.com> writes: > Minor comment in line > > On 17-04-24 02:50 PM, Eric Anholt wrote: >> Cygnus is a small family of SoCs, of which we currently have >> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the >> same as 58xx, just requiring a tiny bit of setup that was previously >> missing. >> >> Signed-off-by: Eric Anholt <eric@anholt.net> >> --- >> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ >> drivers/net/dsa/b53/b53_srab.c | 2 ++ >> 2 files changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt >> index d6c6e41648d4..49c93d3c0839 100644 >> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt >> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt >> @@ -29,6 +29,9 @@ Required properties: >> "brcm,bcm58625-srab" >> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string >> >> + For the BCM11360 SoC, must be: >> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string >> + > place in alphabetical order in the doc? Moved it above BCM5310x now. I hope that's what you meant.
On 17-04-24 04:54 PM, Eric Anholt wrote: > Scott Branden <scott.branden@broadcom.com> writes: > >> Minor comment in line >> >> On 17-04-24 02:50 PM, Eric Anholt wrote: >>> Cygnus is a small family of SoCs, of which we currently have >>> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the >>> same as 58xx, just requiring a tiny bit of setup that was previously >>> missing. >>> >>> Signed-off-by: Eric Anholt <eric@anholt.net> >>> --- >>> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ >>> drivers/net/dsa/b53/b53_srab.c | 2 ++ >>> 2 files changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt >>> index d6c6e41648d4..49c93d3c0839 100644 >>> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt >>> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt >>> @@ -29,6 +29,9 @@ Required properties: >>> "brcm,bcm58625-srab" >>> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string >>> >>> + For the BCM11360 SoC, must be: >>> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string >>> + >> place in alphabetical order in the doc? > > Moved it above BCM5310x now. I hope that's what you meant. > Yes, sorry for not being more clear. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello! On 4/25/2017 12:50 AM, Eric Anholt wrote: > Cygnus is a small family of SoCs, of which we currently have > devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the > same as 58xx, just requiring a tiny bit of setup that was previously > missing. > > Signed-off-by: Eric Anholt <eric@anholt.net> > --- > Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ > drivers/net/dsa/b53/b53_srab.c | 2 ++ > 2 files changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt > index d6c6e41648d4..49c93d3c0839 100644 > --- a/Documentation/devicetree/bindings/net/dsa/b53.txt > +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt > @@ -29,6 +29,9 @@ Required properties: > "brcm,bcm58625-srab" > "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string > > + For the BCM11360 SoC, must be: > + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string Missing closing quote here and above? [...] MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index d6c6e41648d4..49c93d3c0839 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -29,6 +29,9 @@ Required properties: "brcm,bcm58625-srab" "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string + For the BCM11360 SoC, must be: + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string + For the BCM63xx/33xx SoCs with an integrated switch, must be one of: "brcm,bcm3384-switch" "brcm,bcm6328-switch" diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c index 8a62b6a69703..c37ffd1b6833 100644 --- a/drivers/net/dsa/b53/b53_srab.c +++ b/drivers/net/dsa/b53/b53_srab.c @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = { { .compatible = "brcm,bcm53018-srab" }, { .compatible = "brcm,bcm53019-srab" }, { .compatible = "brcm,bcm5301x-srab" }, + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID }, @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = { { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID }, + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID }, { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID }, { /* sentinel */ }, };
Cygnus is a small family of SoCs, of which we currently have devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the same as 58xx, just requiring a tiny bit of setup that was previously missing. Signed-off-by: Eric Anholt <eric@anholt.net> --- Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++ drivers/net/dsa/b53/b53_srab.c | 2 ++ 2 files changed, 5 insertions(+)