[2/2,v4] dt-bindings: display: imx: entry for AUS mode

Submitted by Martin Kaiser on April 21, 2017, 12:29 p.m.

Details

Message ID 1492777790-12748-1-git-send-email-martin@kaiser.cx
State New
Headers show

Commit Message

Martin Kaiser April 21, 2017, 12:29 p.m.
Allow setting AUS mode for a display from the device tree. Use an
optional boolean property. AUS mode can be set only on imx21 and
compatible chipsets.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Rob Herring <robh@kernel.org>
---
sending this again, I missed the v4 in the Subject line

v4:
   rename the DT property to fsl,aus-mode

v3:
   use a boolean DT property instead of the register value
   separate patches for DT binding and code changes

v2:
   re-sending DT bindings and code changes as one patch

 Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Bartlomiej Zolnierkiewicz April 21, 2017, 2:50 p.m.
On Friday, April 21, 2017 02:29:50 PM Martin Kaiser wrote:
> Allow setting AUS mode for a display from the device tree. Use an
> optional boolean property. AUS mode can be set only on imx21 and
> compatible chipsets.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> Acked-by: Rob Herring <robh@kernel.org>

Patch queued for 4.12, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch hide | download patch | download mbox

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 7a5c0e2..e5a8b36 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -13,6 +13,8 @@  Required nodes:
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value
+	A display node may optionally define
+	- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
 
 Optional properties:
 - lcd-supply: Regulator for LCD supply voltage.