@@ -341,6 +341,10 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2e-evm.dtb \
keystone-k2g-evm.dtb
+dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
+ logicpd-torpedo-37xx-devkit.dtb \
+ logicpd-som-lv-37xx-devkit.dts
+
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
new file mode 100644
@@ -0,0 +1,19 @@
+Summary
+=======
+
+The source for omap3som encompases the DM3730 SOM-LV and DM3730 Torpedo platforms.
+
+By default, the Torpedo Device Tree is integrated into U-Boot,but the MMC controller, GPIO and I2C controllers are the same, so for the purposes of loading U-Boot, it should be sufficient. However this will display the Model as "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit" upon boot.
+
+The actual board remains autodetected and the Board will read "DM37xx SOM LV" when used on the DM37 SOM-LV. The device tree loaded with Linux is also correct.
+
+Integrating the SOM-LV Device Tree into U-Boot
+==============================================
+
+This step is optional, but should you want to change the default to the SOM-LV, locate the configs/omap3_logic_defconfig file and make the following change.
+
+ CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit"
+
+ make distclean
+ make omap3_logic_defconfig
+
@@ -36,16 +36,8 @@
DECLARE_GLOBAL_DATA_PTR;
-#define CONTROL_WKUP_CTRL 0x48002a5c
-#define GPIO_IO_PWRDNZ (1 << 6)
-#define PBIASLITEVMODE1 (1 << 8)
-
-/*
- * two dimensional array of strucures containining board name and Linux
- * machine IDs; row it selected based on CPU column is slected based
- * on hsusb0_data5 pin having a pulldown resistor
- */
-
+/* This is only needed until SPL gets OF support */
+#ifdef CONFIG_SPL_BUILD
static const struct ns16550_platdata omap3logic_serial = {
.base = OMAP34XX_UART1,
.reg_shift = 2,
@@ -57,7 +49,13 @@ U_BOOT_DEVICE(omap3logic_uart) = {
"ns16550_serial",
&omap3logic_serial
};
+#endif
+/*
+ * two dimensional array of strucures containining board name and Linux
+ * machine IDs; row it selected based on CPU column is slected based
+ * on hsusb0_data5 pin having a pulldown resistor
+ */
static struct board_id {
char *name;
int machine_id;
@@ -3,6 +3,8 @@ CONFIG_OMAP34XX=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_OMAP3_LOGIC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
+CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
@@ -36,6 +38,11 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_OMAP36XX_PINS=y
CONFIG_SYS_NS16550=y
@@ -46,4 +53,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="TI"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_OF_LIBFDT=y
@@ -17,12 +17,28 @@
#include <configs/ti_omap3_common.h>
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Disable MMC DM for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#undef CONFIG_DM_MMC
+#undef OMAP_HSMMC_USE_GPIO
+
+/* select serial console configuration for SPL */
+#undef CONFIG_CONS_INDEX
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
+#endif
+
+
/*
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
* order to allow for BCH8 to fit in.
*/
#undef CONFIG_SPL_TEXT_BASE
+#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
@@ -34,16 +50,11 @@
/* Hardware drivers */
/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_4 /* GPIO 96..128 is in GPIO bank 4 */
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
#define CONFIG_USB_OMAP3
-/* select serial console configuration */
-#undef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
-#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */
-
/* commands to include */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_MTDPARTS
@@ -52,8 +63,6 @@
/* I2C */
#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */
-#define EXPANSION_EEPROM_I2C_BUS 2 /* I2C Bus for AT24C64 */
-#define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID
/* USB */
#define CONFIG_USB_MUSB_OMAP2PLUS
This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions