@@ -455,9 +455,9 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
#define __SOFTEN_TEST(h, vec) \
lbz r10,PACASOFTIRQEN(r13); \
- cmpwi r10,IRQ_DISABLE_MASK_LINUX; \
+ andi. r10,r10,IRQ_DISABLE_MASK_LINUX; \
li r10,SOFTEN_VALUE_##vec; \
- beq masked_##h##interrupt
+ bne masked_##h##interrupt
#define _SOFTEN_TEST(h, vec) __SOFTEN_TEST(h, vec)
@@ -30,8 +30,8 @@
/*
* flags for paca->soft_enabled
*/
-#define IRQ_DISABLE_MASK_NONE 1
-#define IRQ_DISABLE_MASK_LINUX 0
+#define IRQ_DISABLE_MASK_NONE 0
+#define IRQ_DISABLE_MASK_LINUX 1
#endif /* CONFIG_PPC64 */
@@ -134,7 +134,7 @@ static inline bool arch_irqs_disabled(void)
_was_enabled = local_paca->soft_enabled; \
local_paca->soft_enabled = IRQ_DISABLE_MASK_LINUX;\
local_paca->irq_happened |= PACA_IRQ_HARD_DIS; \
- if (_was_enabled == IRQ_DISABLE_MASK_NONE) \
+ if (!(_was_enabled & IRQ_DISABLE_MASK_LINUX)) \
trace_hardirqs_off(); \
} while(0)
@@ -132,8 +132,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
*/
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG)
lbz r10,PACASOFTIRQEN(r13)
- xori r10,r10,IRQ_DISABLE_MASK_NONE
-1: tdnei r10,0
+1: tdnei r10,IRQ_DISABLE_MASK_NONE
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
@@ -1010,7 +1009,7 @@ _GLOBAL(enter_rtas)
* check it with the asm equivalent of WARN_ON
*/
lbz r0,PACASOFTIRQEN(r13)
-1: tdnei r0,IRQ_DISABLE_MASK_LINUX
+1: tdeqi r0,IRQ_DISABLE_MASK_NONE
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
@@ -276,6 +276,16 @@ int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
if (regno == PT_DSCR)
return get_user_dscr(task, data);
+ /*
+ * softe copies paca->soft_enabled variable state. Since soft_enabled is
+ * no more used as a flag, lets force usr to alway see the softe value as 1
+ * which means interrupts are not soft disabled.
+ */
+ if (regno == PT_SOFTE) {
+ *data = 1;
+ return 0;
+ }
+
if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) {
*data = ((unsigned long *)task->thread.regs)[regno];
return 0;
@@ -138,12 +138,20 @@ static inline int save_general_regs(struct pt_regs *regs,
{
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i;
+ /* Force usr to alway see softe as 1 (interrupts enabled) */
+ elf_greg_t64 softe = 0x1;
WARN_ON(!FULL_REGS(regs));
for (i = 0; i <= PT_RESULT; i ++) {
if (i == 14 && !FULL_REGS(regs))
i = 32;
+ if ( i == PT_SOFTE) {
+ if(__put_user((unsigned int)softe, &frame->mc_gregs[i]))
+ return -EFAULT;
+ else
+ continue;
+ }
if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i]))
return -EFAULT;
}
@@ -110,6 +110,8 @@ static long setup_sigcontext(struct sigcontext __user *sc,
struct pt_regs *regs = tsk->thread.regs;
unsigned long msr = regs->msr;
long err = 0;
+ /* Force usr to alway see softe as 1 (interrupts enabled) */
+ unsigned long softe = 0x1;
BUG_ON(tsk != current);
@@ -169,6 +171,7 @@ static long setup_sigcontext(struct sigcontext __user *sc,
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
+ err |= __put_user(softe, &sc->gp_regs[PT_SOFTE]);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
if (set != NULL)
"paca->soft_enabled" is used as a flag to mask some of interrupts. Currently supported flags values and their details: soft_enabled MSR[EE] 0 0 Disabled (PMI and HMI not masked) 1 1 Enabled "paca->soft_enabled" is initialized to 1 to make the interripts as enabled. arch_local_irq_disable() will toggle the value when interrupts needs to disbled. At this point, the interrupts are not actually disabled, instead, interrupt vector has code to check for the flag and mask it when it occurs. By "mask it", it update interrupt paca->irq_happened and return. arch_local_irq_restore() is called to re-enable interrupts, which checks and replays interrupts if any occured. Now, as mentioned, current logic doesnot mask "performance monitoring interrupts" and PMIs are implemented as NMI. But this patchset depends on local_irq_* for a successful local_* update. Meaning, mask all possible interrupts during local_* update and replay them after the update. So the idea here is to reserve the "paca->soft_enabled" logic. New values and details: soft_enabled MSR[EE] 1 0 Disabled (PMI and HMI not masked) 0 1 Enabled Reason for the this change is to create foundation for a third mask value "0x2" for "soft_enabled" to add support to mask PMIs. When ->soft_enabled is set to a value "3", PMI interrupts are mask and when set to a value of "1", PMI are not mask. With this patch also extends soft_enabled interrupt disable mask. Patch also fixes the ptrace call to force the user to see the softe value to be alway 1. Reason being, even though userspace has no business knowing about softe, it is part of pt_regs. Like-wise in signal context Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> --- arch/powerpc/include/asm/exception-64s.h | 4 ++-- arch/powerpc/include/asm/hw_irq.h | 6 +++--- arch/powerpc/kernel/entry_64.S | 5 ++--- arch/powerpc/kernel/ptrace.c | 10 ++++++++++ arch/powerpc/kernel/signal_32.c | 8 ++++++++ arch/powerpc/kernel/signal_64.c | 3 +++ 6 files changed, 28 insertions(+), 8 deletions(-)