@@ -174,7 +174,7 @@ throw " | " unreachable " | " prohibit " | " blackhole " | " nat " ]"
.ti -8
.IR ENCAP " := [ "
-.IR MPLS " | " IP | " BPF " ] "
+.IR MPLS " | " IP " | " BPF " | " SEG6 " ] "
.ti -8
.IR ENCAP_MPLS " := "
@@ -193,7 +193,6 @@ throw " | " unreachable " | " prohibit " | " blackhole " | " nat " ]"
.B ttl
.IR TTL " ]"
-
.ti -8
.IR ENCAP_BPF " := "
.BR bpf " [ "
@@ -206,6 +205,16 @@ throw " | " unreachable " | " prohibit " | " blackhole " | " nat " ]"
.B headroom
.IR SIZE " ]"
+.ti -8
+.IR ENCAP_SEG6 " := "
+.B seg6
+.BR mode " [ "
+.BR encap " | " inline " ] "
+.B segs
+.IR SEGMENTS " [ "
+.B hmac
+.IR KEYID " ]"
+
.SH DESCRIPTION
.B ip route
is used to manipulate entries in the kernel routing tables.
@@ -652,6 +661,8 @@ is a string specifying the supported encapsulation type. Namely:
.BI bpf
- Execution of BPF program
.sp
+.BI seg6
+- encapsulation type IPv6 Segment Routing
.in -8
.I ENCAPHDR
@@ -703,6 +714,25 @@ is a set of encapsulation attributes specific to the
.in -2
.sp
+.B seg6
+.in +2
+.B mode inline
+- Directly insert Segment Routing Header after IPv6 header
+.sp
+
+.B mode encap
+- Encapsulate packet in an outer IPv6 header with SRH
+.sp
+
+.I SEGMENTS
+- List of comma-separated IPv6 addresses
+.sp
+
+.I KEYID
+- Numerical value in decimal representation. See \fBip-sr\fR(8).
+.in -2
+.sp
+
.in -8
.TP
@@ -986,6 +1016,11 @@ ip route add 10.1.1.0/30 encap mpls 200/300 via 10.1.1.1 dev eth0
.RS 4
Adds an ipv4 route with mpls encapsulation attributes attached to it.
.RE
+.PP
+ip -6 route add 2001:db8:1::/64 encap seg6 mode encap segs 2001:db8:42::1,2001:db8:ffff::2 dev eth0
+.RS 4
+Adds an IPv6 route with SRv6 encapsulation and two segments attached.
+.RE
.SH SEE ALSO
.br
.BR ip (8)
new file mode 100644
@@ -0,0 +1,58 @@
+.TH IP\-SR 8 "14 Apr 2017" "iproute2" "Linux"
+.SH "NAME"
+ip-sr \- IPv6 Segment Routing management
+.SH SYNOPSIS
+.sp
+.ad l
+.in +8
+.ti -8
+.B ip sr
+.RI " { " COMMAND " | "
+.BR help " }"
+.sp
+.ti -8
+
+.ti -8
+.B ip sr hmac show
+
+.ti -8
+.B ip sr hmac set
+.I KEYID ALGO
+
+.ti -8
+.B ip sr tunsrc show
+
+.ti -8
+.B ip sr tunsrc set
+.I ADDRESS
+
+.SH DESCRIPTION
+The \fBip sr\fR command is used to configure IPv6 Segment Routing (SRv6)
+internal parameters.
+.PP
+Those parameters include the mapping between an HMAC key ID and its associated
+hashing algorithm and secret, and the IPv6 address to use as source for encapsulated
+packets.
+.PP
+The \fBip sr hmac set\fR command prompts for a passphrase that will be used as the
+HMAC secret for the corresponding key ID. A blank passphrase removes the mapping.
+The currently supported algorithms for \fIALGO\fR are \fBsha1\fR and \fBsha256\fR.
+.PP
+If the tunnel source is set to the address :: (which is the default), then an address
+of the egress interface will be selected. As this operation may hinder performances,
+it is recommended to set a non-default address.
+
+.SH EXAMPLES
+.PP
+.SS Configure an HMAC mapping for key ID 42 and hashing algorithm SHA-256
+.nf
+# ip sr hmac set 42 sha256
+.PP
+.SS Set the tunnel source address to 2001:db8::1
+.nf
+# ip sr tunsrc set 2001:db8::1
+.SH SEE ALSO
+.br
+.BR ip-route (8)
+.SH AUTHOR
+David Lebrun <david.lebrun@uclouvain.be>
This patch adds information about seg6 encapsulation in the ip-route manual, as well as the ip-sr manual page. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> --- man/man8/ip-route.8.in | 39 +++++++++++++++++++++++++++++++-- man/man8/ip-sr.8 | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 95 insertions(+), 2 deletions(-) create mode 100644 man/man8/ip-sr.8