@@ -278,11 +278,6 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info, &info };
- /* SB600/700 don't have secondary port wired */
- if ((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) ||
- (pdev->device == PCI_DEVICE_ID_ATI_IXP700_IDE))
- ppi[1] = &ata_dummy_port_info;
-
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
}
@@ -644,14 +644,16 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
- /* enable IRQ on hotplug */
- pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
- if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
- dev_dbg(&pdev->dev,
- "enabling SATA hotplug (0x%x)\n",
- (int) tmp8);
- tmp8 |= SATA_HOTPLUG;
- pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
+ if (board_id == vt6421) {
+ /* enable IRQ on hotplug */
+ pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
+ if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
+ dev_dbg(&pdev->dev,
+ "enabling SATA hotplug (0x%x)\n",
+ (int) tmp8);
+ tmp8 |= SATA_HOTPLUG;
+ pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
+ }
}
/*
Hello, Linus. Two libata fixes. One to disable hotplug on VT6420 which never worked properly. The other reverts an earlier patch which disabled the second port on SB600/700. There were some confusions due to earlier datasheets which incorrectly indicated that the second port is not implemented on both SB600 and 700. Thanks. The following changes since commit 6022c5cadf1a43ca30f431f128daa6163909ad60: ahci: qoriq: correct the sata ecc setting error (2017-03-09 11:55:23 -0500) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git for-4.11-fixes for you to fetch changes up to 3cf864520e877505158f09075794a08abab11bbe: sata_via: Enable hotplug only on VT6421 (2017-04-11 09:12:18 +0900) ---------------------------------------------------------------- Ondrej Zary (1): sata_via: Enable hotplug only on VT6421 Tejun Heo (1): Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700" drivers/ata/pata_atiixp.c | 5 ----- drivers/ata/sata_via.c | 18 ++++++++++-------- 2 files changed, 10 insertions(+), 13 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html