Patchwork [U-Boot,v2] tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII

login
register
mail settings
Submitter Kumar Gala
Date Dec. 9, 2010, 3:52 p.m.
Message ID <1291909974-28636-1-git-send-email-galak@kernel.crashing.org>
Download mbox | patch
Permalink /patch/74916/
State Accepted
Commit 72c96a6802d9b1c949785d1d152f8bc8666c753d
Delegated to: Kumar Gala
Headers show

Comments

Kumar Gala - Dec. 9, 2010, 3:52 p.m.
The following commit:

commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 3 17:52:07 2009 -0600

    tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode

Removed setting Auto-Neg by default, however this is believed to be
proper default configuration for initialization of the TBI interface.

Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
Auto-Neg to be disabled to function properly.

This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
with an SGMII riser card.  We also remove setting
CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
default setting is sufficient for them.

Additionally, we clean up the code a bit to remove an unnecessary second
define.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
---
* Added comments per Peter T's request

 drivers/net/tsec.c            |    9 ++++-----
 include/configs/P1_P2_RDB.h   |    8 --------
 include/configs/xpedite537x.h |   10 ++++++++++
 include/configs/xpedite550x.h |   10 ++++++++++
 4 files changed, 24 insertions(+), 13 deletions(-)
Kumar Gala - Dec. 13, 2010, 3:29 p.m.
On Dec 9, 2010, at 9:52 AM, Kumar Gala wrote:

> The following commit:
> 
> commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4
> Author: Peter Tyser <ptyser@xes-inc.com>
> Date:   Tue Nov 3 17:52:07 2009 -0600
> 
>    tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
> 
> Removed setting Auto-Neg by default, however this is believed to be
> proper default configuration for initialization of the TBI interface.
> 
> Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
> XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
> Auto-Neg to be disabled to function properly.
> 
> This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
> with an SGMII riser card.  We also remove setting
> CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
> default setting is sufficient for them.
> 
> Additionally, we clean up the code a bit to remove an unnecessary second
> define.
> 
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Acked-by: Peter Tyser <ptyser@xes-inc.com>
> Tested-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> * Added comments per Peter T's request
> 
> drivers/net/tsec.c            |    9 ++++-----
> include/configs/P1_P2_RDB.h   |    8 --------
> include/configs/xpedite537x.h |   10 ++++++++++
> include/configs/xpedite550x.h |   10 ++++++++++
> 4 files changed, 24 insertions(+), 13 deletions(-)

applied to 85xx

- k

Patch

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 9b5dd92..77908d1 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -5,7 +5,7 @@ 
  * terms of the GNU Public License, Version 2, incorporated
  * herein by reference.
  *
- * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2010 Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * author Andy Fleming
  *
@@ -292,13 +292,12 @@  static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
 
 /* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */
 #ifndef CONFIG_TSEC_TBICR_SETTINGS
-#define TBICR_SETTINGS ( \
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
 		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
 		| TBICR_FULL_DUPLEX \
 		| TBICR_SPEED1_SET \
 		)
-#else
-#define TBICR_SETTINGS CONFIG_TSEC_TBICR_SETTINGS
 #endif /* CONFIG_TSEC_TBICR_SETTINGS */
 
 /* Configure the TBI for SGMII operation */
@@ -311,7 +310,7 @@  static void tsec_configure_serdes(struct tsec_private *priv)
 	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
 			TBICON_CLK_SELECT);
 	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
-			TBICR_SETTINGS);
+			CONFIG_TSEC_TBICR_SETTINGS);
 }
 
 /* Discover which PHY is attached to the device, and configure it
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index a21afb7..2dfee3d 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -437,14 +437,6 @@  extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
-		TBICR_PHY_RESET \
-		| TBICR_ANEG_ENABLE \
-		| TBICR_FULL_DUPLEX \
-		| TBICR_SPEED1_SET \
-		)
-
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index e0a1fa4..a74766d 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -375,6 +375,16 @@  extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_ETHPRIME		"eTSEC2"
 
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 #define CONFIG_TSEC1		1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 42d1f69..a051913 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -345,6 +345,16 @@  extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_ETHPRIME		"eTSEC2"
 
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 #define CONFIG_TSEC1		1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)