diff mbox

[v4,2/4] mvebu: xp: Add PWM properties to .dtsi files

Message ID 20170327194301.1104-3-ralph.sennhauser@gmail.com
State New
Headers show

Commit Message

Ralph Sennhauser March 27, 2017, 7:42 p.m. UTC
From: Andrew Lunn <andrew@lunn.ch>

Add properties to the GPIO nodes to allow them to be also used as PWM
lines.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser:
  * Use new compatible string marvell,armada-370-xp-gpio
  * Add missing reg-names / #pwm-cell properties to armada-xp-mv78260.dtsi
    'gpio1' node]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
 arch/arm/boot/dts/armada-370.dtsi        | 16 +++++++++++-----
 arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++++++----
 arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +++++++++++-----
 arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +++++++++++-----
 4 files changed, 43 insertions(+), 19 deletions(-)

Comments

Gregory CLEMENT March 30, 2017, 3:45 p.m. UTC | #1
Hi Ralph,
 
 On lun., mars 27 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:

The title should start by ARM: dts: mvebu:

If there is no need to have a v5 then I wil take care of modifying the
title while applying it.


> From: Andrew Lunn <andrew@lunn.ch>
>
> Add properties to the GPIO nodes to allow them to be also used as PWM
> lines.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> URL: https://patchwork.ozlabs.org/patch/427294/
> [Ralph Sennhauser:
>   * Use new compatible string marvell,armada-370-xp-gpio
>   * Add missing reg-names / #pwm-cell properties to armada-xp-mv78260.dtsi
>     'gpio1' node]
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> ---
>  arch/arm/boot/dts/armada-370.dtsi        | 16 +++++++++++-----
>  arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++++++----
>  arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +++++++++++-----
>  arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +++++++++++-----
>  4 files changed, 43 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index cc011c8..e30b076 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -137,29 +137,35 @@
>  			};
>  
>  			gpio0: gpio@18100 {
> -				compatible = "marvell,orion-gpio";
> -				reg = <0x18100 0x40>;
> +				compatible = "marvell,armada-370-xp-gpio";

I think we should keep the "marvell,orion-gpio" too because the hardware
is still compatible with it. Morever it will allow to use a recent dtb
with an old kernel.


> +				reg = <0x18100 0x40>, <0x181c0 0x08>;
> +				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
>  				#gpio-cells = <2>;
> +				#pwm-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
>  				interrupts = <82>, <83>, <84>, <85>;
> +				clocks = <&coreclk 0>;
>  			};
>  
>  			gpio1: gpio@18140 {
> -				compatible = "marvell,orion-gpio";
> -				reg = <0x18140 0x40>;
> +				compatible = "marvell,armada-370-xp-gpio";

Same here and for all the others...

Thanks,

Gregory
Ralph Sennhauser March 30, 2017, 4:14 p.m. UTC | #2
On Thu, 30 Mar 2017 17:45:08 +0200
Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> Hi Ralph,
>  
>  On lun., mars 27 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com>
> wrote:
> 
> The title should start by ARM: dts: mvebu:
> 
> If there is no need to have a v5 then I wil take care of modifying the
> title while applying it.

Noted.

> 
> 
> > From: Andrew Lunn <andrew@lunn.ch>
> >
> > Add properties to the GPIO nodes to allow them to be also used as
> > PWM lines.
> >
> > Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> > URL: https://patchwork.ozlabs.org/patch/427294/
> > [Ralph Sennhauser:
> >   * Use new compatible string marvell,armada-370-xp-gpio
> >   * Add missing reg-names / #pwm-cell properties to
> > armada-xp-mv78260.dtsi 'gpio1' node]
> > Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> > ---
> >  arch/arm/boot/dts/armada-370.dtsi        | 16 +++++++++++-----
> >  arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++++++----
> >  arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +++++++++++-----
> >  arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +++++++++++-----
> >  4 files changed, 43 insertions(+), 19 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/armada-370.dtsi
> > b/arch/arm/boot/dts/armada-370.dtsi index cc011c8..e30b076 100644
> > --- a/arch/arm/boot/dts/armada-370.dtsi
> > +++ b/arch/arm/boot/dts/armada-370.dtsi
> > @@ -137,29 +137,35 @@
> >  			};
> >  
> >  			gpio0: gpio@18100 {
> > -				compatible = "marvell,orion-gpio";
> > -				reg = <0x18100 0x40>;
> > +				compatible =
> > "marvell,armada-370-xp-gpio";  
> 
> I think we should keep the "marvell,orion-gpio" too because the
> hardware is still compatible with it. Morever it will allow to use a
> recent dtb with an old kernel.

And it will remain compatible. Apart from not collecting compatible
strings there is no reason to drop them right now, so will add them back
for a (possible) v5.

Thanks
Ralph
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index cc011c8..e30b076 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -137,29 +137,35 @@ 
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <2>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 07c5090..429ac10 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -202,25 +202,31 @@ 
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <17>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 64e936a..333c470 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -285,29 +285,35 @@ 
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index d1383dd..2ff825d 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -323,29 +323,35 @@ 
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;