diff mbox

[U-Boot,v4,6/6] board: sama5d3_xplained: enable early debug UART

Message ID 20170324011446.3713-7-wenyou.yang@atmel.com
State Superseded
Delegated to: Simon Glass
Headers show

Commit Message

Wenyou Yang March 24, 2017, 1:14 a.m. UTC
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v4: None
Changes in v3:
 - Convert the macb to support DM and clean up macb init code.
 - Remain the SPI speed macros.
 - Update the config options for SPL.
 - Update the commit log.
 - Remove the unneeded dbgu init during board_early_init_f stage.
 - Use CONFIG_DEBUG_UART_CLOCK as the input clock for the early
   debug uart.
 - Drop [PATCH] configs: sama5d3_xplained: move CONFIG_SYS_NO_FLASH
   to defconfig.
 - Rebase on v2017.03.

Changes in v2:
 - rebase on the patch set:
        [PATCH v3 0/8] board: sama5d4: convert boards to support DM/DT
        http://lists.denx.de/pipermail/u-boot/2017-February/280506.html

 board/atmel/sama5d3_xplained/sama5d3_xplained.c | 13 ++++++++++++-
 configs/sama5d3_xplained_mmc_defconfig          |  6 ++++++
 configs/sama5d3_xplained_nandflash_defconfig    |  6 ++++++
 3 files changed, 24 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index f2f5506adc..21f332b382 100644
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -12,6 +12,7 @@ 
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
+#include <debug_uart.h>
 #include <spl.h>
 #include <asm/arch/atmel_mpddrc.h>
 #include <asm/arch/at91_wdt.h>
@@ -65,12 +66,22 @@  static void sama5d3_xplained_mci0_hw_init(void)
 }
 #endif
 
-int board_early_init_f(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
 {
 	at91_seriald_hw_init();
+}
+#endif
 
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
 	return 0;
 }
+#endif
 
 int board_init(void)
 {
diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index 921b6a2112..d28d1d9a33 100644
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -54,6 +54,12 @@  CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index 042f6a78e7..8cc8169de5 100644
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -51,6 +51,12 @@  CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y