diff mbox

[v3] PPC4xx: Adding PCI(E) MSI support

Message ID 1291426393-1429-1-git-send-email-tmarri@apm.com (mailing list archive)
State Superseded
Delegated to: Josh Boyer
Headers show

Commit Message

Tirumala Marri Dec. 4, 2010, 1:33 a.m. UTC
From: Tirumala Marri <tmarri@apm.com>

This patch adds MSI support for 440SPe, 460Ex, 460Sx and 405Ex.

Signed-off-by: Tirumala R Marri <tmarri@apm.com>
---
v3:
 * Rebased to Josh next tree
 * Cleanup and remove some unwanted log msg.
 * Remove list member and its references.
 * Keep msi_data local reference.
v2:
  * Remove or add blank lines at appropriate places.
  * Added BITMAP as it is easy to request and free the MSIs
  * Removed UPPER_4BITS_OF36BIT & LOWER_32BITS_OF36BIT;
  * Remove unused feature variable.
  * Remove initialization of "virq".
  * remove static int_no varaible and replace with bitmap.
  * Eliminated reading count from DTS tree and added a macro.
  * Remove printK.
  * Remove else in setup_irqs.
  * Free interrupts in teardown_msi_interrupts().
  * Print contraints in check_device().
  * Replace ioremap with of_iomap().
  * Use msi_data in setup_pcieh_hw().
  * Don't unmap in the setup_pcieh_hw().
  * don't use WARN_ON.
  * Remove ppc4xx_msi_ids[].
---
 arch/powerpc/boot/dts/canyonlands.dts |   18 ++
 arch/powerpc/boot/dts/katmai.dts      |   18 ++
 arch/powerpc/boot/dts/kilauea.dts     |   28 +++
 arch/powerpc/boot/dts/redwood.dts     |   20 +++
 arch/powerpc/platforms/40x/Kconfig    |    2 +
 arch/powerpc/platforms/44x/Kconfig    |    6 +
 arch/powerpc/sysdev/Kconfig           |    7 +
 arch/powerpc/sysdev/Makefile          |    1 +
 arch/powerpc/sysdev/ppc4xx_msi.c      |  291 +++++++++++++++++++++++++++++++++
 9 files changed, 391 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/sysdev/ppc4xx_msi.c

Comments

Philipp Ittershagen Dec. 4, 2010, 10:02 a.m. UTC | #1
Hi,

a few nitpicks here. I don't have any clue about MSI, but I have seen
some code-style related issues.

On 12/04/2010 02:33 AM, tmarri@apm.com wrote:
> +static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> +	int err = 0;
> +	int int_no = -ENOMEM;
> +	unsigned int virq;
> +	struct msi_msg msg;
> +	struct msi_desc *entry;
> +	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
> +
> +	list_for_each_entry(entry, &dev->msi_list, list) {
> +		int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
> +		if(int_no >= 0)
> +			break;
> +		if(int_no < 0) {
> +

Empty line here not needed.

> +			err = int_no;
> +			pr_debug("%s: fail allocating msi interrupt\n",
> +					__func__);
> +		}
> +		virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
> +		if (virq == NO_IRQ) {
> +			dev_err(&dev->dev, "%s: fail mapping irq\n", __func__);
> +			msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1);
> +			err = -ENOSPC;
> +			goto out_free;
> +		}
> +		msi_data->msi_virqs[int_no] = virq;
> +		set_irq_data(virq, (void *)int_no);
> +		dev_dbg(&dev->dev, "%s: virq = %d \n", __func__, virq);
> +
> +		/* Setup msi address space */
> +		msg.address_hi = msi_data->msi_addr_hi;
> +		msg.address_lo = msi_data->msi_addr_lo;
> +
> +		set_irq_msi(virq, entry);
> +		msg.data = int_no;
> +		write_msi_msg(virq, &msg);
> +	}
> +
> +out_free:
> +	return err;
> +}

You don't really need the goto-style here, because you have nothing to
clean up when returning. You could instead return directly and save some
lines, because you don't have to assign err and then use goto all the time.


> +
> +void ppc4xx_teardown_msi_irqs(struct pci_dev *dev)
> +{
> +	struct msi_desc *entry;
> +	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
> +
> +	dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n");
> +
> +	list_for_each_entry(entry, &dev->msi_list, list) {
> +		if (entry->irq == NO_IRQ)
> +			continue;
> +		set_irq_msi(entry->irq, NULL);
> +		msi_bitmap_free_hwirqs(&msi_data->bitmap,
> +				virq_to_hw(entry->irq), 1);
> +		irq_dispose_mapping(entry->irq);
> +	}
> +
> +	return;

This return is not needed.


> +static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
> +				 struct resource res, struct ppc4xx_msi *msi)
> +{
> +	const u32 *msi_data;
> +	const u32 *msi_mask;
> +	const u32 *sdr_addr;
> +	int err = 0;
> +	dma_addr_t msi_phys;
> +	void *msi_virt;
> +
> +	sdr_addr = of_get_property(dev->dev.of_node, "sdr-base", NULL);
> +	if (!sdr_addr)
> +		return -1;
> +
> +	SDR0_WRITE(sdr_addr, (u64)res.start >> 32);	 /*HIGH addr */
> +	SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */
> +
> +
> +	msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi");
> +	if (msi->msi_dev) {
> +		err = -ENODEV;
> +		goto error_out;
> +	}
> +	msi->msi_regs = of_iomap(msi->msi_dev, 0);
> +	if (!msi->msi_regs) {
> +		dev_err(&dev->dev, "of_iomap problem failed\n");
> +		return -ENOMEM;
> +	}

You directly return here and in all other bad cases this function
covers, you use the goto-style (which you don't really need here,
because there is no cleanup to do in case of a failure). Better use a
consistent way for returning.


> +	msi_data = of_get_property(dev->dev.of_node, "msi-data", NULL);
> +	if (!msi_data) {
> +		err = -1;
> +		goto error_out;
> +	}
> +
> +	msi_mask = of_get_property(dev->dev.of_node, "msi-mask", NULL);
> +	if (!msi_mask) {
> +		err = -1;
> +		goto error_out;
> +	}
> +
> +	/* Program MSI Expected data and Mask bits */
> +	out_be32(msi->msi_regs + PEIH_MSIED, *msi_data);
> +	out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask);
> +
> +	return err;
> +error_out:
> +	return err;
> +}

This was already mentioned by Josh Boyer.

> +
> +static int ppc4xx_of_msi_remove(struct platform_device *dev)
> +{
> +	struct ppc4xx_msi *msi = dev->dev.platform_data;
> +	int i;
> +	int virq;
> +
> +	for(i = 0; i < NR_MSI_IRQS; i++) {
> +		virq = msi->msi_virqs[i];
> +		if (virq != NO_IRQ)
> +			irq_dispose_mapping(virq);
> +	}
> +
> +	if (msi->bitmap.bitmap)
> +		msi_bitmap_free(&msi->bitmap);
> +	iounmap(msi->msi_regs);
> +	of_node_put(msi->msi_dev);
> +	kfree(msi);
> +
> +	return 0;
> +}
> +
> +static int __devinit ppc4xx_msi_probe(struct platform_device *dev,
> +				      const struct of_device_id *match)
> +{
> +	struct ppc4xx_msi *msi;
> +	struct resource res;
> +	int err = 0;
> +
> +	msi = &ppc4xx_msi;/*keep the msi data for further use*/
> +
> +	dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n");
> +
> +	msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL);
> +	if (!msi) {
> +		dev_err(&dev->dev, "No memory for MSI structure\n");
> +		err = -ENOMEM;
> +		goto error_out;
> +	}
> +	dev->dev.platform_data = msi;
> +
[...]
> +
> +error_out:
> +	ppc4xx_of_msi_remove(dev);
> +	return err;
> +}

If this function fails on allocating memory, you don't have to remove
your device because it was not created and therefore the expected
resources are not available in your *_remove function.



Hope this helps!


   Philipp
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 5b27a4b..5142a4a 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -506,5 +506,23 @@ 
 				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <3>;
+			interrupts = <0 1 2 3>;
+			interrupt-parent = <&UIC3>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC3 0x18 1
+					1 &UIC3 0x19 1
+					2 &UIC3 0x1A 1
+					3 &UIC3 0x1B 1>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 7c3be5e..f913dbe 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -442,6 +442,24 @@ 
 				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
+		MSI: ppc4xx-msi@400300000 {
+				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+				reg = < 0x4 0x00300000 0x100>;
+				sdr-base = <0x3B0>;
+				msi-data = <0x00000000>;
+				msi-mask = <0x44440000>;
+				interrupt-count = <3>;
+				interrupts =<0 1 2 3>;
+				interrupt-parent = <&UIC0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &UIC0 0xC 1
+					1 &UIC0 0x0D 1
+					2 &UIC0 0x0E 1
+					3 &UIC0 0x0F 1>;
+		};
+
 		I2O: i2o@400100000 {
 			compatible = "ibm,i2o-440spe";
 			reg = <0x00000004 0x00100000 0x100>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 89edb16..1613d6e 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -403,5 +403,33 @@ 
 				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0x0 0xEF620000 0x100>;
+			sdr-base = <0x4B0>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <12>;
+			interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>;
+			interrupt-parent = <&UIC2>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC2 0x10 1
+					1 &UIC2 0x11 1
+					2 &UIC2 0x12 1
+					2 &UIC2 0x13 1
+					2 &UIC2 0x14 1
+					2 &UIC2 0x15 1
+					2 &UIC2 0x16 1
+					2 &UIC2 0x17 1
+					2 &UIC2 0x18 1
+					2 &UIC2 0x19 1
+					2 &UIC2 0x1A 1
+					2 &UIC2 0x1B 1
+					2 &UIC2 0x1C 1
+					3 &UIC2 0x1D 1>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index 81636c0..d86a3a4 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -358,8 +358,28 @@ 
 				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
+		MSI: ppc4xx-msi@400300000 {
+				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+				reg = < 0x4 0x00300000 0x100
+					0x4 0x00300000 0x100>;
+				sdr-base = <0x3B0>;
+				msi-data = <0x00000000>;
+				msi-mask = <0x44440000>;
+				interrupt-count = <3>;
+				interrupts =<0 1 2 3>;
+				interrupt-parent = <&UIC0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &UIC0 0xC 1
+					1 &UIC0 0x0D 1
+					2 &UIC0 0x0E 1
+					3 &UIC0 0x0F 1>;
+		};
+
 	};
 
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index b721764..92aeee6 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -57,6 +57,8 @@  config KILAUEA
 	select 405EX
 	select PPC40x_SIMPLE
 	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select 4xx_MSI
 	help
 	  This option enables support for the AMCC PPC405EX evaluation board.
 
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0f979c5..3836353 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -74,6 +74,8 @@  config KATMAI
 	select 440SPe
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select 4xx_MSI
 	help
 	  This option enables support for the AMCC PPC440SPe evaluation board.
 
@@ -119,6 +121,8 @@  config CANYONLANDS
 	select 460EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select 4xx_MSI
 	select IBM_NEW_EMAC_RGMII
 	select IBM_NEW_EMAC_ZMII
 	help
@@ -145,6 +149,8 @@  config REDWOOD
 	select 460SX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select 4xx_MSI
 	help
 	  This option enables support for the AMCC PPC460SX Redwood board.
 
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 3965828..32f5a40 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -7,8 +7,15 @@  config PPC4xx_PCI_EXPRESS
 	depends on PCI && 4xx
 	default n
 
+config 4xx_MSI
+	bool
+	depends on PCI_MSI
+	depends on PCI && 4xx
+	default n
+
 config PPC_MSI_BITMAP
 	bool
 	depends on PCI_MSI
 	default y if MPIC
 	default y if FSL_PCI
+	default y if 4xx_MSI
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9c29734..2ca7737 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -41,6 +41,7 @@  obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
+obj-$(CONFIG_4xx_MSI)          += ppc4xx_msi.o
 obj-$(CONFIG_PPC4xx_CPM)	+= ppc4xx_cpm.o
 obj-$(CONFIG_PPC4xx_GPIO)	+= ppc4xx_gpio.o
 
diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
new file mode 100644
index 0000000..d60f949
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_msi.c
@@ -0,0 +1,291 @@ 
+/*
+ * Adding PCI-E MSI support for PPC4XX SoCs.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Authors: 	Tirumala R Marri <tmarri@apm.com>
+ * 		Feng Kan <fkan@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <boot/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/msi_bitmap.h>
+
+#define PEIH_TERMADH	0x00
+#define PEIH_TERMADL	0x08
+#define PEIH_MSIED	0x10
+#define PEIH_MSIMK	0x18
+#define PEIH_MSIASS	0x20
+#define PEIH_FLUSH0	0x30
+#define PEIH_FLUSH1	0x38
+#define PEIH_CNTRST	0x48
+#define NR_MSI_IRQS	4
+
+struct ppc4xx_msi {
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	int msi_virqs[NR_MSI_IRQS];
+	struct msi_bitmap bitmap;
+	struct device_node *msi_dev;
+};
+
+static struct ppc4xx_msi ppc4xx_msi;
+
+static int ppc4xx_msi_init_allocator(struct platform_device *dev,
+		struct ppc4xx_msi *msi_data)
+{
+	int err;
+
+	err = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
+			      dev->dev.of_node);
+	if (err)
+		return err;
+
+	err = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
+	if (err < 0) {
+		msi_bitmap_free(&msi_data->bitmap);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	int err = 0;
+	int int_no = -ENOMEM;
+	unsigned int virq;
+	struct msi_msg msg;
+	struct msi_desc *entry;
+	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+		if(int_no >= 0)
+			break;
+		if(int_no < 0) {
+
+			err = int_no;
+			pr_debug("%s: fail allocating msi interrupt\n",
+					__func__);
+		}
+		virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
+		if (virq == NO_IRQ) {
+			dev_err(&dev->dev, "%s: fail mapping irq\n", __func__);
+			msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1);
+			err = -ENOSPC;
+			goto out_free;
+		}
+		msi_data->msi_virqs[int_no] = virq;
+		set_irq_data(virq, (void *)int_no);
+		dev_dbg(&dev->dev, "%s: virq = %d \n", __func__, virq);
+
+		/* Setup msi address space */
+		msg.address_hi = msi_data->msi_addr_hi;
+		msg.address_lo = msi_data->msi_addr_lo;
+
+		set_irq_msi(virq, entry);
+		msg.data = int_no;
+		write_msi_msg(virq, &msg);
+	}
+
+out_free:
+	return err;
+}
+
+void ppc4xx_teardown_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_desc *entry;
+	struct ppc4xx_msi *msi_data = &ppc4xx_msi;
+
+	dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n");
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+		set_irq_msi(entry->irq, NULL);
+		msi_bitmap_free_hwirqs(&msi_data->bitmap,
+				virq_to_hw(entry->irq), 1);
+		irq_dispose_mapping(entry->irq);
+	}
+
+	return;
+}
+
+static int ppc4xx_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+	dev_dbg(&pdev->dev, "PCIE-MSI:%s called. vec %x type %d\n",
+		__func__, nvec, type);
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("ppc4xx msi: MSI-X untested, trying anyway.\n");
+
+	return 0;
+}
+
+static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
+				 struct resource res, struct ppc4xx_msi *msi)
+{
+	const u32 *msi_data;
+	const u32 *msi_mask;
+	const u32 *sdr_addr;
+	int err = 0;
+	dma_addr_t msi_phys;
+	void *msi_virt;
+
+	sdr_addr = of_get_property(dev->dev.of_node, "sdr-base", NULL);
+	if (!sdr_addr)
+		return -1;
+
+	SDR0_WRITE(sdr_addr, (u64)res.start >> 32);	 /*HIGH addr */
+	SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */
+
+
+	msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi");
+	if (msi->msi_dev) {
+		err = -ENODEV;
+		goto error_out;
+	}
+	msi->msi_regs = of_iomap(msi->msi_dev, 0);
+	if (!msi->msi_regs) {
+		dev_err(&dev->dev, "of_iomap problem failed\n");
+		return -ENOMEM;
+	}
+	dev_dbg(&dev->dev, "PCIE-MSI: msi register mapped 0x%x 0x%x\n",
+		(u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs));
+
+	msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL);
+	msi->msi_addr_hi = 0x0;
+	msi->msi_addr_lo = (u32) msi_phys;
+	dev_dbg(&dev->dev, "PCIE-MSI: msi address 0x%x \n", msi->msi_addr_lo);
+
+	/* Progam the Interrupt handler Termination addr registers */
+	out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi);
+	out_be32(msi->msi_regs + PEIH_TERMADL, msi->msi_addr_lo);
+
+	msi_data = of_get_property(dev->dev.of_node, "msi-data", NULL);
+	if (!msi_data) {
+		err = -1;
+		goto error_out;
+	}
+
+	msi_mask = of_get_property(dev->dev.of_node, "msi-mask", NULL);
+	if (!msi_mask) {
+		err = -1;
+		goto error_out;
+	}
+
+	/* Program MSI Expected data and Mask bits */
+	out_be32(msi->msi_regs + PEIH_MSIED, *msi_data);
+	out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask);
+
+	return err;
+error_out:
+	return err;
+}
+
+static int ppc4xx_of_msi_remove(struct platform_device *dev)
+{
+	struct ppc4xx_msi *msi = dev->dev.platform_data;
+	int i;
+	int virq;
+
+	for(i = 0; i < NR_MSI_IRQS; i++) {
+		virq = msi->msi_virqs[i];
+		if (virq != NO_IRQ)
+			irq_dispose_mapping(virq);
+	}
+
+	if (msi->bitmap.bitmap)
+		msi_bitmap_free(&msi->bitmap);
+	iounmap(msi->msi_regs);
+	of_node_put(msi->msi_dev);
+	kfree(msi);
+
+	return 0;
+}
+
+static int __devinit ppc4xx_msi_probe(struct platform_device *dev,
+				      const struct of_device_id *match)
+{
+	struct ppc4xx_msi *msi;
+	struct resource res;
+	int err = 0;
+
+	msi = &ppc4xx_msi;/*keep the msi data for further use*/
+
+	dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n");
+
+	msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL);
+	if (!msi) {
+		dev_err(&dev->dev, "No memory for MSI structure\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+	dev->dev.platform_data = msi;
+
+	/* Get MSI ranges */
+	err = of_address_to_resource(dev->dev.of_node, 0, &res);
+	if (err) {
+		dev_err(&dev->dev, "%s resource error!\n",
+			dev->dev.of_node->full_name);
+		goto error_out;
+	}
+
+	if (ppc4xx_setup_pcieh_hw(dev, res, msi))
+		goto error_out;
+
+	err = ppc4xx_msi_init_allocator(dev, msi);
+	if (err) {
+		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+		goto error_out;
+	}
+
+	ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs;
+	ppc_md.msi_check_device = ppc4xx_msi_check_device;
+	return err;
+
+error_out:
+	ppc4xx_of_msi_remove(dev);
+	return err;
+}
+
+static struct of_platform_driver ppc4xx_msi_driver = {
+	.driver = {
+		   .name = "ppc4xx-msi",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = ppc4xx_msi_probe,
+	.remove = ppc4xx_of_msi_remove,
+};
+
+static __init int ppc4xx_msi_init(void)
+{
+	return of_register_platform_driver(&ppc4xx_msi_driver);
+}
+
+subsys_initcall(ppc4xx_msi_init);