[U-Boot,02/18] stm32f7: sdram: move sdram driver code to ram drivers area

Message ID 1490042927-27450-3-git-send-email-vikas.manocha@st.com
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Vikas MANOCHA March 20, 2017, 8:48 p.m.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
---
 board/st/stm32f746-disco/stm32f746-disco.c | 113 +--------------------------
 configs/stm32f746-disco_defconfig          |   2 +
 drivers/ram/Kconfig                        |   8 ++
 drivers/ram/Makefile                       |   1 +
 drivers/ram/stm32_sdram.c                  | 119 +++++++++++++++++++++++++++++
 5 files changed, 131 insertions(+), 112 deletions(-)
 create mode 100644 drivers/ram/stm32_sdram.c

Patch

diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index fdad8d1..1569358 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -10,7 +10,6 @@ 
 #include <asm/armv7m.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/fmc.h>
 #include <dm/platdata.h>
 #include <dm/platform_data/serial_stm32x7.h>
 #include <asm/arch/stm32_periph.h>
@@ -106,57 +105,8 @@  out:
 	return rv;
 }
 
-static inline u32 _ns2clk(u32 ns, u32 freq)
-{
-	u32 tmp = freq/1000000;
-	return (tmp * ns) / 1000;
-}
-
-#define NS2CLK(ns) (_ns2clk(ns, freq))
-
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS	3	/* 3 cycles */
-#define SDRAM_NB	1	/* Number of banks */
-#define SDRAM_MWID	1	/* 16 bit memory */
-
-#define SDRAM_NR	0x1	/* 12-bit row */
-#define SDRAM_NC	0x0	/* 8-bit col */
-#define SDRAM_RBURST	0x1	/* Single read requests always as bursts */
-#define SDRAM_RPIPE	0x0	/* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD	NS2CLK(12)
-#define SDRAM_TRCD	NS2CLK(18)
-#define SDRAM_TRP	NS2CLK(18)
-#define SDRAM_TRAS	NS2CLK(42)
-#define SDRAM_TRC	NS2CLK(60)
-#define SDRAM_TRFC	NS2CLK(60)
-#define SDRAM_TCDL	(1 - 1)
-#define SDRAM_TRDL	NS2CLK(12)
-#define SDRAM_TBDL	(1 - 1)
-#define SDRAM_TREF	(NS2CLK(64000000 / 8192) - 20)
-#define SDRAM_TCCD	(1 - 1)
-
-#define SDRAM_TXSR	SDRAM_TRFC	/* Row cycle time after precharge */
-#define SDRAM_TMRD	1		/* Page 10, Mode Register Set */
-
-
-/* Last data in to row precharge, need also comply ineq on page 1648 */
-#define SDRAM_TWR	max(\
-	(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
-	(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
-)
-
-
-#define SDRAM_MODE_BL_SHIFT	0
-#define SDRAM_MODE_CAS_SHIFT	4
-#define SDRAM_MODE_BL		0
-#define SDRAM_MODE_CAS		SDRAM_CAS
-
 int dram_init(void)
 {
-	u32 freq;
 	int rv;
 
 	rv = fmc_setup_gpio();
@@ -164,67 +114,7 @@  int dram_init(void)
 		return rv;
 
 	clock_setup(FMC_CLOCK_CFG);
-
-	/*
-	 * Get frequency for NS2CLK calculation.
-	 */
-	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
-
-	writel(
-		CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
-		| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
-		| SDRAM_NB << FMC_SDCR_NB_SHIFT
-		| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
-		| SDRAM_NR << FMC_SDCR_NR_SHIFT
-		| SDRAM_NC << FMC_SDCR_NC_SHIFT
-		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
-		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
-		&STM32_SDRAM_FMC->sdcr1);
-
-	writel(
-		SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
-		| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
-		| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
-		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
-		| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
-		| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
-		| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
-		&STM32_SDRAM_FMC->sdtr1);
-
-	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(200);	/* 200 us delay, page 10, "Power-Up" */
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_PRECHARGE,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-	FMC_BUSY_WAIT();
-
-	writel((FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_AUTOREFRESH
-		| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_1 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
-		| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
-		<< FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
-		&STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_NORMAL,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	FMC_BUSY_WAIT();
-
-	/* Refresh timer */
-	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+	stm32_sdram_init();
 
 	/*
 	 * Fill in global info with description of SRAM configuration
@@ -233,7 +123,6 @@  int dram_init(void)
 	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;
 
 	gd->ram_size = CONFIG_SYS_RAM_SIZE;
-
 	return rv;
 }
 
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
index b5457c6..046041a 100644
--- a/configs/stm32f746-disco_defconfig
+++ b/configs/stm32f746-disco_defconfig
@@ -43,3 +43,5 @@  CONFIG_CLK=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_PINCTRL_STM32=y
+CONFIG_RAM=y
+CONFIG_STM32_SDRAM=y
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index ff09f22..61afd7a 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -16,3 +16,11 @@  config SPL_RAM
 	  If this is acceptable and you have a need to use RAM drivers in
 	  SPL, enable this option. It might provide a cleaner interface to
 	  setting up RAM (e.g. SDRAM / DDR) within SPL.
+
+config STM32_SDRAM
+	bool "Enable STM32 SDRAM support"
+	depends on RAM
+	help
+	  STM32F7 family devices support flexible memory controller(FMC) to
+	  support external memories like sdram, psram & nand.
+	  This driver is for the sdram memory interface with the FMC.
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 0e10249..ecb036d 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -6,3 +6,4 @@ 
 #
 obj-$(CONFIG_RAM) += ram-uclass.o
 obj-$(CONFIG_SANDBOX) += sandbox_ram.o
+obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
new file mode 100644
index 0000000..13f8964
--- /dev/null
+++ b/drivers/ram/stm32_sdram.c
@@ -0,0 +1,119 @@ 
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/fmc.h>
+#include <asm/arch/stm32.h>
+
+static inline u32 _ns2clk(u32 ns, u32 freq)
+{
+	u32 tmp = freq/1000000;
+	return (tmp * ns) / 1000;
+}
+
+#define NS2CLK(ns) (_ns2clk(ns, freq))
+
+/*
+ * Following are timings for IS42S16400J, from corresponding datasheet
+ */
+#define SDRAM_CAS	3	/* 3 cycles */
+#define SDRAM_NB	1	/* Number of banks */
+#define SDRAM_MWID	1	/* 16 bit memory */
+
+#define SDRAM_NR	0x1	/* 12-bit row */
+#define SDRAM_NC	0x0	/* 8-bit col */
+#define SDRAM_RBURST	0x1	/* Single read requests always as bursts */
+#define SDRAM_RPIPE	0x0	/* No HCLK clock cycle delay */
+
+#define SDRAM_TRRD	NS2CLK(12)
+#define SDRAM_TRCD	NS2CLK(18)
+#define SDRAM_TRP	NS2CLK(18)
+#define SDRAM_TRAS	NS2CLK(42)
+#define SDRAM_TRC	NS2CLK(60)
+#define SDRAM_TRFC	NS2CLK(60)
+#define SDRAM_TCDL	(1 - 1)
+#define SDRAM_TRDL	NS2CLK(12)
+#define SDRAM_TBDL	(1 - 1)
+#define SDRAM_TREF	(NS2CLK(64000000 / 8192) - 20)
+#define SDRAM_TCCD	(1 - 1)
+
+#define SDRAM_TXSR	SDRAM_TRFC	/* Row cycle time after precharge */
+#define SDRAM_TMRD	1		/* Page 10, Mode Register Set */
+
+
+/* Last data in to row precharge, need also comply ineq on page 1648 */
+#define SDRAM_TWR	max(\
+		(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
+		(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
+		)
+
+
+#define SDRAM_MODE_BL_SHIFT	0
+#define SDRAM_MODE_CAS_SHIFT	4
+#define SDRAM_MODE_BL		0
+#define SDRAM_MODE_CAS		SDRAM_CAS
+
+int stm32_sdram_init(void)
+{
+	u32 freq;
+
+	/*
+	 * Get frequency for NS2CLK calculation.
+	 */
+	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
+
+	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
+			| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
+			| SDRAM_NB << FMC_SDCR_NB_SHIFT
+			| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
+			| SDRAM_NR << FMC_SDCR_NR_SHIFT
+			| SDRAM_NC << FMC_SDCR_NC_SHIFT
+			| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
+			| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
+			&STM32_SDRAM_FMC->sdcr1);
+
+	writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
+			| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
+			| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
+			| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
+			| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
+			| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
+			| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
+			&STM32_SDRAM_FMC->sdtr1);
+
+	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
+	       &STM32_SDRAM_FMC->sdcmr);
+	udelay(200);	/* 200 us delay, page 10, "Power-Up" */
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_PRECHARGE,
+	       &STM32_SDRAM_FMC->sdcmr);
+	udelay(100);
+	FMC_BUSY_WAIT();
+
+	writel((FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_AUTOREFRESH
+		| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
+	udelay(100);
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_1 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
+	       | SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
+	       << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
+	       &STM32_SDRAM_FMC->sdcmr);
+	udelay(100);
+	FMC_BUSY_WAIT();
+
+	writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_NORMAL,
+	       &STM32_SDRAM_FMC->sdcmr);
+	FMC_BUSY_WAIT();
+
+	/* Refresh timer */
+	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+
+	return 0;
+}