Message ID | 20170320133222.21773-1-richard.genoud@gmail.com |
---|---|
State | Not Applicable, archived |
Headers | show |
On Mon, Mar 20, 2017 at 02:32:22PM +0100, Richard Genoud wrote: > This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT > LCD panel, which can be supported by the simple panel driver. > > Signed-off-by: Richard Genoud <richard.genoud@gmail.com> > --- > > Changes since v1: > Add power-supply property and an example in documentation > > .../bindings/display/panel/winstar,wf35ltiacd | 53 ++++++++++++++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++ > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd > > diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd > new file mode 100644 > index 000000000000..9ff59b868b28 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd > @@ -0,0 +1,53 @@ > +Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel > + > +Required properties: > +- compatible: should be "winstar,wf35ltiacd" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > + > +This binding is compatible with the simple-panel binding, which is specified > +in simple-panel.txt in this directory. > + > +Example: > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; > + brightness-levels = <0 31 63 95 127 159 191 223 255>; > + default-brightness-level = <191>; > + power-supply = <&bl_reg>; > + status = "okay"; Drop status from examples. > + }; > + > + bl_reg: backlight_regulator { > + compatible = "regulator-fixed"; > + regulator-name = "backlight-power-supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + status = "okay"; > + }; > + > + panel: panel { > + compatible = "winstar,wf35ltiacd", "simple-panel"; > + backlight = <&backlight>; > + power-supply = <&panel_reg>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel_input: endpoint@0 { > + reg = <0>; You don't need reg and unit-addresses for these. With that, Acked-by: Rob Herring <robh@kernel.org> > + remote-endpoint = <&hlcdc_panel_output>; > + }; > + }; > + }; > + > + panel_reg: panel_regulator { > + compatible = "regulator-fixed"; > + regulator-name = "panel-power-supply"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + status = "okay"; > + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2017-03-24 16:58 GMT+01:00 Rob Herring <robh@kernel.org>: > On Mon, Mar 20, 2017 at 02:32:22PM +0100, Richard Genoud wrote: >> This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT >> LCD panel, which can be supported by the simple panel driver. >> >> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> >> --- >> >> Changes since v1: >> Add power-supply property and an example in documentation >> >> .../bindings/display/panel/winstar,wf35ltiacd | 53 ++++++++++++++++++++++ >> drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++ >> 2 files changed, 81 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd >> >> diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd >> new file mode 100644 >> index 000000000000..9ff59b868b28 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd >> @@ -0,0 +1,53 @@ >> +Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel >> + >> +Required properties: >> +- compatible: should be "winstar,wf35ltiacd" >> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) >> + >> +This binding is compatible with the simple-panel binding, which is specified >> +in simple-panel.txt in this directory. >> + >> +Example: >> + backlight: backlight { >> + compatible = "pwm-backlight"; >> + pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; >> + brightness-levels = <0 31 63 95 127 159 191 223 255>; >> + default-brightness-level = <191>; >> + power-supply = <&bl_reg>; >> + status = "okay"; > > Drop status from examples. > >> + }; >> + >> + bl_reg: backlight_regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "backlight-power-supply"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + status = "okay"; >> + }; >> + >> + panel: panel { >> + compatible = "winstar,wf35ltiacd", "simple-panel"; >> + backlight = <&backlight>; >> + power-supply = <&panel_reg>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; >> + >> + port@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + panel_input: endpoint@0 { >> + reg = <0>; > > You don't need reg and unit-addresses for these. > > With that, > > Acked-by: Rob Herring <robh@kernel.org> > Ok, I'll resend the patch with reg and unit-addresses removed. Thanks ! >> + remote-endpoint = <&hlcdc_panel_output>; >> + }; >> + }; >> + }; >> + >> + panel_reg: panel_regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "panel-power-supply"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + status = "okay"; >> + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd new file mode 100644 index 000000000000..9ff59b868b28 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd @@ -0,0 +1,53 @@ +Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel + +Required properties: +- compatible: should be "winstar,wf35ltiacd" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Example: + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <191>; + power-supply = <&bl_reg>; + status = "okay"; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + panel: panel { + compatible = "winstar,wf35ltiacd", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; + }; diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 06aaf79de8c8..5d45664c6c0e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1713,6 +1713,31 @@ static const struct panel_desc urt_umsh_8596md_parallel = { .bus_format = MEDIA_BUS_FMT_RGB666_1X18, }; +static const struct drm_display_mode winstar_wf35ltiacd_mode = { + .clock = 6410, + .hdisplay = 320, + .hsync_start = 320 + 20, + .hsync_end = 320 + 20 + 30, + .htotal = 320 + 20 + 30 + 38, + .vdisplay = 240, + .vsync_start = 240 + 4, + .vsync_end = 240 + 4 + 3, + .vtotal = 240 + 4 + 3 + 15, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static const struct panel_desc winstar_wf35ltiacd = { + .modes = &winstar_wf35ltiacd_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 70, + .height = 53, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, +}; + static const struct of_device_id platform_of_match[] = { { .compatible = "ampire,am800480r3tmqwa1h", @@ -1892,6 +1917,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "urt,umsh-8596md-20t", .data = &urt_umsh_8596md_parallel, }, { + .compatible = "winstar,wf35ltiacd", + .data = &winstar_wf35ltiacd, + }, { /* sentinel */ } };
This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> --- Changes since v1: Add power-supply property and an example in documentation .../bindings/display/panel/winstar,wf35ltiacd | 53 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++ 2 files changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html