Message ID | DB5PR03MB1334B76DAB5DE40CCDE3F978E73A0@DB5PR03MB1334.eurprd03.prod.outlook.com |
---|---|
State | Rejected |
Headers | show |
Luke, All, On 2017-03-20 12:41 +0000, luke spake thusly: > Sorry, made a mistake in the original patch. > > > >From 9c77dfd825bebbf02e3b2837dacb9ae4873c9ec8 Mon Sep 17 00:00:00 2001 > From: Luke <skywal_l at hotmail.com> > Date: Sat, 18 Mar 2017 18:17:24 +0000 > Subject: [PATCH 1/1] Modify post-build.sh for raspberry pi zero so that it > activates the UART serial console in config.txt Please send you patches using 'git send-email'. Your current submissions are not appropriately formatted. > Signed-off-by: Luke <skywal_l at hotmail.com> > --- > board/raspberrypi/post-build.sh | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/board/raspberrypi/post-build.sh b/board/raspberrypi/post-build.sh > index 5e5eb71..6d2f0d1 100755 > --- a/board/raspberrypi/post-build.sh > +++ b/board/raspberrypi/post-build.sh > @@ -9,3 +9,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then > sed -i '/GENERIC_SERIAL/a\ > tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab > fi > + > +# Activate the console > +echo "enable_uart=1" | cat >> ${TARGET_DIR}/../images/rpi-firmware/config.txt Two things about this one: - what you wanted to use was $(BINARIES_DIR)/rpi-firmware/config.txt, - as I already replied to you earlier, please look at how it is done for the rpi3, and try to see if the same trick applies to the rpi0-w. Thanks! Regards, Yann E. MORIN. > -- > 2.7.4 > > > De : Yann E. MORIN <yann.morin.1998@gmail.com> de la part de Yann E. MORIN <yann.morin.1998@free.fr> > Envoyé : dimanche 19 mars 2017 13:27 > À : luke > Cc : buildroot@busybox.net > Objet : Re: [Buildroot] [PATCH] Enable UART on raspberry pi zero > > Luke, All, > > On 2017-03-18 18:22 +0000, luke spake thusly: > > From 9c77dfd825bebbf02e3b2837dacb9ae4873c9ec8 Mon Sep 17 00:00:00 2001 > > From: Luke <skywal_l@hotmail.com> > > Date: Sat, 18 Mar 2017 18:17:24 +0000 > > Subject: [PATCH 1/1] Modify post-build.sh for raspberry pi zero so that it > > activates the UART serial console in config.txt > > > > Signed-off-by: Luke <skywal_l@hotmail.com> > > --- > > board/raspberrypi/post-build.sh | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/board/raspberrypi/post-build.sh b/board/raspberrypi/post-build.sh > > index 5e5eb71..6d2f0d1 100755 > > --- a/board/raspberrypi/post-build.sh > > +++ b/board/raspberrypi/post-build.sh > > @@ -9,3 +9,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then > > sed -i '/GENERIC_SERIAL/a\ > > tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab > > fi > > + > > +# Activate the console > > +echo "enable_uart=1" | cat >> config.txt > > I have a rpi-0 here, and I do not need that config option to get the UART > working. > > Regards, > Yann E. MORIN. > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > > start [BZH_lan] > ymorin.is-a-geek.org > The guys from SimpleMachines have been kind enough to give me a Sim.One SBC. I'll be able to use that board to test Maverick Crunch, suport for which I will add to ... > > '------------------------------^-------^------------------^--------------------' > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
Hello Luke, Yann, On Mon, 20 Mar 2017 22:02:41 +0100, "Yann E. MORIN" <yann.morin.1998@free.fr> wrote: > Luke, All, > > On 2017-03-20 12:41 +0000, luke spake thusly: > > Sorry, made a mistake in the original patch. > > > > > > >From 9c77dfd825bebbf02e3b2837dacb9ae4873c9ec8 Mon Sep 17 00:00:00 2001 > > From: Luke <skywal_l at hotmail.com> > > Date: Sat, 18 Mar 2017 18:17:24 +0000 > > Subject: [PATCH 1/1] Modify post-build.sh for raspberry pi zero so that it > > activates the UART serial console in config.txt > > Please send you patches using 'git send-email'. Your current submissions > are not appropriately formatted. > > > Signed-off-by: Luke <skywal_l at hotmail.com> > > --- > > board/raspberrypi/post-build.sh | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/board/raspberrypi/post-build.sh b/board/raspberrypi/post-build.sh > > index 5e5eb71..6d2f0d1 100755 > > --- a/board/raspberrypi/post-build.sh > > +++ b/board/raspberrypi/post-build.sh > > @@ -9,3 +9,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then > > sed -i '/GENERIC_SERIAL/a\ > > tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab > > fi > > + > > +# Activate the console > > +echo "enable_uart=1" | cat >> ${TARGET_DIR}/../images/rpi-firmware/config.txt > > Two things about this one: > > - what you wanted to use was $(BINARIES_DIR)/rpi-firmware/config.txt, > > - as I already replied to you earlier, please look at how it is > done for the rpi3, and try to see if the same trick applies to > the rpi0-w. > In case the rpi3 fix works for rpi0-w take a look at this patch: https://patchwork.ozlabs.org/patch/741230/ adding a new config/raspberrypi0w_defconfig, same as for rpi0 adding additional 'dtoverlay=pi3-miniuart-bt' (and adding the overlay directory to the sdcard image)... Regards, Peter > Thanks! > > Regards, > Yann E. MORIN. > > > -- > > 2.7.4 > > > > > > De : Yann E. MORIN <yann.morin.1998@gmail.com> de la part de Yann E. MORIN <yann.morin.1998@free.fr> > > Envoyé : dimanche 19 mars 2017 13:27 > > À : luke > > Cc : buildroot@busybox.net > > Objet : Re: [Buildroot] [PATCH] Enable UART on raspberry pi zero > > > > Luke, All, > > > > On 2017-03-18 18:22 +0000, luke spake thusly: > > > From 9c77dfd825bebbf02e3b2837dacb9ae4873c9ec8 Mon Sep 17 00:00:00 2001 > > > From: Luke <skywal_l@hotmail.com> > > > Date: Sat, 18 Mar 2017 18:17:24 +0000 > > > Subject: [PATCH 1/1] Modify post-build.sh for raspberry pi zero so that it > > > activates the UART serial console in config.txt > > > > > > Signed-off-by: Luke <skywal_l@hotmail.com> > > > --- > > > board/raspberrypi/post-build.sh | 3 +++ > > > 1 file changed, 3 insertions(+) > > > > > > diff --git a/board/raspberrypi/post-build.sh b/board/raspberrypi/post-build.sh > > > index 5e5eb71..6d2f0d1 100755 > > > --- a/board/raspberrypi/post-build.sh > > > +++ b/board/raspberrypi/post-build.sh > > > @@ -9,3 +9,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then > > > sed -i '/GENERIC_SERIAL/a\ > > > tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab > > > fi > > > + > > > +# Activate the console > > > +echo "enable_uart=1" | cat >> config.txt > > > > I have a rpi-0 here, and I do not need that config option to get the UART > > working. > > > > Regards, > > Yann E. MORIN. > > > > -- > > .-----------------.--------------------.------------------.--------------------. > > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > > | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | > > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > > > > > > start [BZH_lan] > > ymorin.is-a-geek.org > > The guys from SimpleMachines have been kind enough to give me a Sim.One SBC. I'll be able to use that board to test Maverick Crunch, suport for which I will add to ... > > > > '------------------------------^-------^------------------^--------------------' > > > > _______________________________________________ > > buildroot mailing list > > buildroot@busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot >
diff --git a/board/raspberrypi/post-build.sh b/board/raspberrypi/post-build.sh index 5e5eb71..6d2f0d1 100755 --- a/board/raspberrypi/post-build.sh +++ b/board/raspberrypi/post-build.sh @@ -9,3 +9,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then sed -i '/GENERIC_SERIAL/a\ tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab fi + +# Activate the console +echo "enable_uart=1" | cat >> ${TARGET_DIR}/../images/rpi-firmware/config.txt