@@ -83,6 +83,12 @@ Optional properties:
- snps,dcb-algorithm: Queue to be enabled as DCB
- snps,avb-algorithm: Queue to be enabled as AVB
- snps,map-to-dma-channel: Channel to map
+ - Specifiy specific packet routing:
+ - snps,route-avcp: AV Untagged Control packets
+ - snps,route-ptp: PTP Packets
+ - snps,route-dcbcp: DCB Control Packets
+ - snps,route-up: Untagged Packets
+ - snps,route-multi-broad: Multicast & Broadcast Packets
- snps,priority: RX queue priority (Range: 0x0 to 0xF)
- Multiple TX Queues parameters: below the list of all the parameters to
configure the multiple TX queues:
@@ -246,6 +246,15 @@ struct stmmac_extra_stats {
#define STMMAC_TX_MAX_FRAMES 256
#define STMMAC_TX_FRAMES 64
+/* Packets types */
+enum packets_types {
+ PACKET_AVCPQ = 0x1, /* AV Untagged Control packets */
+ PACKET_PTPQ = 0x2, /* PTP Packets */
+ PACKET_DCBCPQ = 0x3, /* DCB Control Packets */
+ PACKET_UPQ = 0x4, /* Untagged Packets */
+ PACKET_MCBCQ = 0x5, /* Multicast & Broadcast Packets */
+};
+
/* Rx IPC status */
enum rx_frame_status {
good_frame = 0x0,
@@ -473,6 +482,9 @@ struct stmmac_ops {
void (*rx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
/* TX Queues Priority */
void (*tx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
+ /* RX Queues Routing */
+ void (*rx_queue_routing)(struct mac_device_info *hw, u8 packet,
+ u32 queue);
/* Program RX Algorithms */
void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg);
/* Program TX Algorithms */
@@ -581,6 +593,11 @@ struct mac_device_info {
unsigned int ps;
};
+struct stmmac_rx_routing {
+ u32 reg_mask;
+ u32 reg_shift;
+};
+
struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr, int mcbins,
int perfect_uc_entries,
int *synopsys_id);
@@ -44,6 +44,22 @@
#define GMAC_ADDR_HIGH(reg) (0x300 + reg * 8)
#define GMAC_ADDR_LOW(reg) (0x304 + reg * 8)
+/* RX Queues Routing */
+#define GMAC_RXQCTRL_AVCPQ_MASK GENMASK(2, 0)
+#define GMAC_RXQCTRL_AVCPQ_SHIFT 0
+#define GMAC_RXQCTRL_PTPQ_MASK GENMASK(6, 4)
+#define GMAC_RXQCTRL_PTPQ_SHIFT 4
+#define GMAC_RXQCTRL_DCBCPQ_MASK GENMASK(10, 8)
+#define GMAC_RXQCTRL_DCBCPQ_SHIFT 8
+#define GMAC_RXQCTRL_UPQ_MASK GENMASK(14, 12)
+#define GMAC_RXQCTRL_UPQ_SHIFT 12
+#define GMAC_RXQCTRL_MCBCQ_MASK GENMASK(18, 16)
+#define GMAC_RXQCTRL_MCBCQ_SHIFT 16
+#define GMAC_RXQCTRL_MCBCQEN BIT(20)
+#define GMAC_RXQCTRL_MCBCQEN_SHIFT 20
+#define GMAC_RXQCTRL_TACPQE BIT(21)
+#define GMAC_RXQCTRL_TACPQE_SHIFT 21
+
/* MAC Packet Filtering */
#define GMAC_PACKET_FILTER_PR BIT(0)
#define GMAC_PACKET_FILTER_HMC BIT(2)
@@ -109,6 +109,39 @@ static void dwmac4_tx_queue_priority(struct mac_device_info *hw,
writel(value, ioaddr + base_register);
}
+static void dwmac4_tx_queue_routing(struct mac_device_info *hw,
+ u8 packet, u32 queue)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value;
+
+ const struct stmmac_rx_routing route_possibilities[] = {
+ { GMAC_RXQCTRL_AVCPQ_MASK, GMAC_RXQCTRL_AVCPQ_SHIFT },
+ { GMAC_RXQCTRL_PTPQ_MASK, GMAC_RXQCTRL_PTPQ_SHIFT },
+ { GMAC_RXQCTRL_DCBCPQ_MASK, GMAC_RXQCTRL_DCBCPQ_SHIFT },
+ { GMAC_RXQCTRL_UPQ_MASK, GMAC_RXQCTRL_UPQ_SHIFT },
+ { GMAC_RXQCTRL_MCBCQ_MASK, GMAC_RXQCTRL_MCBCQ_SHIFT },
+ };
+
+ value = readl(ioaddr + GMAC_RXQ_CTRL1);
+
+ /* routing configuration */
+ value &= ~route_possibilities[packet - 1].reg_mask;
+ value |= (queue << route_possibilities[packet-1].reg_shift) &
+ route_possibilities[packet - 1].reg_mask;
+
+ /* some packets require extra ops */
+ if (packet == PACKET_AVCPQ) {
+ value &= ~GMAC_RXQCTRL_TACPQE;
+ value |= 0x1 << GMAC_RXQCTRL_TACPQE_SHIFT;
+ } else if (packet == PACKET_MCBCQ) {
+ value &= ~GMAC_RXQCTRL_MCBCQEN;
+ value |= 0x1 << GMAC_RXQCTRL_MCBCQEN_SHIFT;
+ }
+
+ writel(value, ioaddr + GMAC_RXQ_CTRL1);
+}
+
static void dwmac4_prog_mtl_rx_algorithms(struct mac_device_info *hw,
u32 rx_alg)
{
@@ -640,6 +673,7 @@ static const struct stmmac_ops dwmac4_ops = {
.rx_queue_enable = dwmac4_rx_queue_enable,
.rx_queue_prio = dwmac4_rx_queue_priority,
.tx_queue_prio = dwmac4_tx_queue_priority,
+ .rx_queue_routing = dwmac4_tx_queue_routing,
.prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
.prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
.set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight,
@@ -2333,6 +2333,27 @@ static void stmmac_mac_config_tx_queues_prio(struct stmmac_priv *priv)
}
/**
+ * stmmac_mac_config_rx_queues_routing - Configure RX Queue Routing
+ * @priv: driver private structure
+ * Description: It is used for configuring the RX queue routing
+ */
+static void stmmac_mac_config_rx_queues_routing(struct stmmac_priv *priv)
+{
+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
+ u32 queue;
+ u8 packet;
+
+ for (queue = 0; queue < rx_queues_count; queue++) {
+ /* no specific packet type routing specified for the queue */
+ if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
+ continue;
+
+ packet = priv->plat->rx_queues_cfg[queue].pkt_route;
+ priv->hw->mac->rx_queue_prio(priv->hw, packet, queue);
+ }
+}
+
+/**
* stmmac_mtl_configuration - Configure MTL
* @priv: driver private structure
* Description: It is used for configurring MTL
@@ -2377,6 +2398,10 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv)
/* Set TX priorities */
if (tx_queues_count > 1 && priv->hw->mac->tx_queue_prio)
stmmac_mac_config_tx_queues_prio(priv);
+
+ /* Set RX routing */
+ if (rx_queues_count > 1 && priv->hw->mac->rx_queue_routing)
+ stmmac_mac_config_rx_queues_routing(priv);
}
/**
@@ -96,6 +96,9 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
/* Disable Priority config by default */
plat->tx_queues_cfg[0].use_prio = false;
plat->rx_queues_cfg[0].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[0].pkt_route = 0x0;
}
static int quark_default_data(struct plat_stmmacenet_data *plat,
@@ -190,6 +190,20 @@ static void stmmac_mtl_setup(struct platform_device *pdev,
plat->rx_queues_cfg[queue].use_prio = true;
}
+ /* RX queue specific packet type routing */
+ if (of_property_read_bool(q_node, "snps,route-avcp"))
+ plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
+ else if (of_property_read_bool(q_node, "snps,route-ptp"))
+ plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
+ else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
+ plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
+ else if (of_property_read_bool(q_node, "snps,route-up"))
+ plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
+ else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
+ plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
+ else
+ plat->rx_queues_cfg[queue].pkt_route = 0x0;
+
queue++;
}
@@ -127,6 +127,7 @@ struct stmmac_axi {
struct stmmac_rxq_cfg {
u8 mode_to_use;
u8 chan;
+ u8 pkt_route;
bool use_prio;
u32 prio;
};
This patch adds the configuration of RX queues' routing. Signed-off-by: Joao Pinto <jpinto@synopsys.com> --- changes v1->v2: - DT bindings were changed to bool - DT parsing was simplified, improving routing parameter scalability Documentation/devicetree/bindings/net/stmmac.txt | 6 ++++ drivers/net/ethernet/stmicro/stmmac/common.h | 17 +++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 16 ++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 34 ++++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 25 ++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 3 ++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 14 +++++++++ include/linux/stmmac.h | 1 + 8 files changed, 116 insertions(+)