@@ -1,7 +1,9 @@
* I2C controller embedded in STMicroelectronics STM32 I2C platform
Required properties :
-- compatible : Must be "st,stm32f4-i2c"
+- compatible : Must be one of the following
+ - "st,stm32f4-i2c"
+ - "st,stm32f7-i2c"
- reg : Offset and length of the register set for the device
- interrupts : Must contain the interrupt id for I2C event and then the
interrupt id for I2C error.
@@ -14,8 +16,22 @@ Required properties :
Optional properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
- the default 100 kHz frequency will be used. As only Normal and Fast modes
- are supported, possible values are 100000 and 400000.
+ the default 100 kHz frequency will be used.
+ For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
+ 100000 and 400000.
+ For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported,
+ possible values are 100000, 400000 and 1000000.
+- st,i2c-timing : A 32-bit I2C timing refister value.
+ This value is only required for "st,stm32f7-i2c".
+ A specific external tool delivered by ST is used to compute the value to be
+ set here according to i2C speed frequency, i2c clock source frequency,
+ i2c rise time and i2c fall time inputs.
+ - bit 31:28: PRESC[3:0]: Timing prescaler
+ - bit 27:24: Reserved
+ - bit 23:20: SCLDEL[3:0]: Data setup time
+ - bit 19:16: SDADEL[3:0]: Data hold time
+ - bit 15:8: SCLH[7:0]: SCL high period
+ - bit 7:0: SCLL[7:0]: SCL low period