@@ -83,6 +83,7 @@ Optional properties:
- snps,dcb-algorithm: Queue to be enabled as DCB
- snps,avb-algorithm: Queue to be enabled as AVB
- snps,map-to-dma-channel: Channel to map
+ - snps,priority: RX queue priority
- Multiple TX Queues parameters: below the list of all the parameters to
configure the multiple TX queues:
- snps,tx-queues-to-use: number of TX queues to be used in the driver
@@ -101,6 +102,7 @@ Optional properties:
- snps,idle_slope: unlock on WoL
- snps,high_credit: max write outstanding req. limit
- snps,low_credit: max read outstanding req. limit
+ - snps,priority: TX queue priority
Examples:
stmmac_axi_setup: stmmac-axi-config {
@@ -115,6 +117,7 @@ Examples:
queue0 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
};
};
@@ -124,6 +127,7 @@ Examples:
queue0 {
snps,weight = <0x10>;
snps,dcb-algorithm;
+ snps,priority = <0x0>;
};
queue1 {
@@ -132,6 +136,7 @@ Examples:
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3E800>;
snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
};
};
@@ -469,6 +469,10 @@ struct stmmac_ops {
int (*rx_ipc)(struct mac_device_info *hw);
/* Enable RX Queues */
void (*rx_queue_enable)(struct mac_device_info *hw, u8 mode, u32 queue);
+ /* RX Queues Priority */
+ void (*rx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
+ /* TX Queues Priority */
+ void (*tx_queue_prio)(struct mac_device_info *hw, u32 prio, u32 queue);
/* Program RX Algorithms */
void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg);
/* Program TX Algorithms */
@@ -22,7 +22,12 @@
#define GMAC_HASH_TAB_32_63 0x00000014
#define GMAC_RX_FLOW_CTRL 0x00000090
#define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
+#define GMAC_TXQ_PRTY_MAP0 0x98
+#define GMAC_TXQ_PRTY_MAP1 0x9C
#define GMAC_RXQ_CTRL0 0x000000a0
+#define GMAC_RXQ_CTRL1 0x000000a4
+#define GMAC_RXQ_CTRL2 0x000000a8
+#define GMAC_RXQ_CTRL3 0x000000ac
#define GMAC_INT_STATUS 0x000000b0
#define GMAC_INT_EN 0x000000b4
#define GMAC_1US_TIC_COUNTER 0x000000dc
@@ -54,6 +59,14 @@
/* MAC Flow Control RX */
#define GMAC_RX_FLOW_CTRL_RFE BIT(0)
+/* RX Queues Priorities */
+#define GMAC_RXQCTRL_PSRQX_MASK(x) GENMASK(7 + ((x) * 8), 0 + ((x) * 8))
+#define GMAC_RXQCTRL_PSRQX_SHIFT(x) ((x) * 8)
+
+/* TX Queues Priorities */
+#define GMAC_TXQCTRL_PSTQX_MASK(x) GENMASK(7 + ((x) * 8), 0 + ((x) * 8))
+#define GMAC_TXQCTRL_PSTQX_SHIFT(x) ((x) * 8)
+
/* MAC Flow Control TX */
#define GMAC_TX_FLOW_CTRL_TFE BIT(1)
#define GMAC_TX_FLOW_CTRL_PT_SHIFT 16
@@ -74,6 +74,41 @@ static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
writel(value, ioaddr + GMAC_RXQ_CTRL0);
}
+static void dwmac4_rx_queue_priority(struct mac_device_info *hw,
+ u32 prio, u32 queue)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 base_register;
+ u32 value;
+
+ base_register = (queue < 4) ? GMAC_RXQ_CTRL2 : GMAC_RXQ_CTRL3;
+
+ value = readl(ioaddr + base_register);
+
+ value &= ~GMAC_RXQCTRL_PSRQX_MASK(queue);
+ value |= (prio << GMAC_RXQCTRL_PSRQX_SHIFT(queue)) &
+ GMAC_RXQCTRL_PSRQX_MASK(queue);
+ writel(value, ioaddr + base_register);
+}
+
+static void dwmac4_tx_queue_priority(struct mac_device_info *hw,
+ u32 prio, u32 queue)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 base_register;
+ u32 value;
+
+ base_register = (queue < 4) ? GMAC_TXQ_PRTY_MAP0 : GMAC_TXQ_PRTY_MAP1;
+
+ value = readl(ioaddr + base_register);
+
+ value &= ~GMAC_TXQCTRL_PSTQX_MASK(queue);
+ value |= (prio << GMAC_TXQCTRL_PSTQX_SHIFT(queue)) &
+ GMAC_TXQCTRL_PSTQX_MASK(queue);
+
+ writel(value, ioaddr + base_register);
+}
+
static void dwmac4_prog_mtl_rx_algorithms(struct mac_device_info *hw,
u32 rx_alg)
{
@@ -603,6 +638,8 @@ static const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
.rx_ipc = dwmac4_rx_ipc_enable,
.rx_queue_enable = dwmac4_rx_queue_enable,
+ .rx_queue_prio = dwmac4_rx_queue_priority,
+ .tx_queue_prio = dwmac4_tx_queue_priority,
.prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
.prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
.set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight,
@@ -2293,6 +2293,46 @@ static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv)
}
/**
+ * stmmac_mac_config_rx_queues_prio - Configure RX Queue priority
+ * @priv: driver private structure
+ * Description: It is used for configuring the RX Queue Priority
+ */
+static void stmmac_mac_config_rx_queues_prio(struct stmmac_priv *priv)
+{
+ u32 rx_queues_count = priv->plat->rx_queues_to_use;
+ u32 queue;
+ u32 prio;
+
+ for (queue = 0; queue < rx_queues_count; queue++) {
+ if (!priv->plat->rx_queues_cfg[queue].use_prio)
+ continue;
+
+ prio = priv->plat->rx_queues_cfg[queue].prio;
+ priv->hw->mac->rx_queue_prio(priv->hw, prio, queue);
+ }
+}
+
+/**
+ * stmmac_mac_config_tx_queues_prio - Configure TX Queue priority
+ * @priv: driver private structure
+ * Description: It is used for configuring the TX Queue Priority
+ */
+static void stmmac_mac_config_tx_queues_prio(struct stmmac_priv *priv)
+{
+ u32 tx_queues_count = priv->plat->tx_queues_to_use;
+ u32 queue;
+ u32 prio;
+
+ for (queue = 0; queue < tx_queues_count; queue++) {
+ if (!priv->plat->tx_queues_cfg[queue].use_prio)
+ continue;
+
+ prio = priv->plat->tx_queues_cfg[queue].prio;
+ priv->hw->mac->tx_queue_prio(priv->hw, prio, queue);
+ }
+}
+
+/**
* stmmac_mtl_configuration - Configure MTL
* @priv: driver private structure
* Description: It is used for configurring MTL
@@ -2329,6 +2369,14 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv)
/* Set the HW DMA mode and the COE */
stmmac_dma_operation_mode(priv);
+
+ /* Set RX priorities */
+ if (rx_queues_count > 1 && priv->hw->mac->rx_queue_prio)
+ stmmac_mac_config_rx_queues_prio(priv);
+
+ /* Set TX priorities */
+ if (tx_queues_count > 1 && priv->hw->mac->tx_queue_prio)
+ stmmac_mac_config_tx_queues_prio(priv);
}
/**
@@ -92,6 +92,10 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat)
/* Set default number of RX and TX queues to use */
plat->tx_queues_to_use = 1;
plat->rx_queues_to_use = 1;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[0].use_prio = false;
+ plat->rx_queues_cfg[0].use_prio = false;
}
static int quark_default_data(struct plat_stmmacenet_data *plat,
@@ -182,6 +182,14 @@ static void stmmac_mtl_setup(struct platform_device *pdev,
plat->rx_queues_cfg[queue].chan = queue;
/* TODO: Dynamic mapping to be included in the future */
+ if (of_property_read_u32(q_node, "snps,priority",
+ &plat->rx_queues_cfg[queue].prio)) {
+ plat->rx_queues_cfg[queue].prio = 0;
+ plat->rx_queues_cfg[queue].use_prio = false;
+ } else {
+ plat->rx_queues_cfg[queue].use_prio = true;
+ }
+
queue++;
}
@@ -235,6 +243,14 @@ static void stmmac_mtl_setup(struct platform_device *pdev,
plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
}
+ if (of_property_read_u32(q_node, "snps,priority",
+ &plat->tx_queues_cfg[queue].prio)) {
+ plat->tx_queues_cfg[queue].prio = 0;
+ plat->tx_queues_cfg[queue].use_prio = false;
+ } else {
+ plat->tx_queues_cfg[queue].use_prio = true;
+ }
+
queue++;
}
@@ -127,6 +127,8 @@ struct stmmac_axi {
struct stmmac_rxq_cfg {
u8 mode_to_use;
u8 chan;
+ bool use_prio;
+ u32 prio;
};
struct stmmac_txq_cfg {
@@ -137,6 +139,8 @@ struct stmmac_txq_cfg {
u32 idle_slope;
u32 high_credit;
u32 low_credit;
+ bool use_prio;
+ u32 prio;
};
struct plat_stmmacenet_data {
This patch adds the configuration of RX and TX queues' priority. Signed-off-by: Joao Pinto <jpinto@synopsys.com> --- Documentation/devicetree/bindings/net/stmmac.txt | 5 +++ drivers/net/ethernet/stmicro/stmmac/common.h | 4 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 13 ++++++ drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 37 +++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 48 ++++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 ++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 16 ++++++++ include/linux/stmmac.h | 4 ++ 8 files changed, 131 insertions(+)