diff mbox

[U-Boot] armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on Nor flash

Message ID 1489470732-45498-1-git-send-email-wenbin.song@nxp.com
State Superseded
Delegated to: York Sun
Headers show

Commit Message

Wenbin song March 14, 2017, 5:52 a.m. UTC
Fix the offsets of MTD partitions on Nor flash on ls1043ardb, ls1043aqds
and ls1046aqds boards.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
---
 include/configs/ls1043a_common.h | 7 ++++---
 include/configs/ls1046aqds.h     | 7 ++++---
 2 files changed, 8 insertions(+), 6 deletions(-)

Comments

York Sun March 15, 2017, 5:13 p.m. UTC | #1
On 03/13/2017 11:06 PM, Wenbin song wrote:
> Fix the offsets of MTD partitions on Nor flash on ls1043ardb, ls1043aqds
> and ls1046aqds boards.
>
> Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
> ---
>  include/configs/ls1043a_common.h | 7 ++++---
>  include/configs/ls1046aqds.h     | 7 ++++---
>  2 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
> index c4b05e0..ca845b6 100644
> --- a/include/configs/ls1043a_common.h
> +++ b/include/configs/ls1043a_common.h
> @@ -192,10 +192,11 @@
>  #else
>  #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
> +			"1m(nor_bank0_fman_uconde),"\
> +			"40m@1100000(nor_bank0_fit)," \
> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
> -			"40m(nor_bank4_fit);7e800000.flash:" \
> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>  			"1m(nand_uboot),1m(nand_uboot_env)," \
>  			"20m(nand_fit);spi0.0:1m(uboot)," \
>  			"5m(kernel),1m(dtb),9m(file_system)"
> diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
> index 4b3b21e..e045249 100644
> --- a/include/configs/ls1046aqds.h
> +++ b/include/configs/ls1046aqds.h
> @@ -487,10 +487,11 @@ unsigned long get_board_ddr_clk(void);
>  #else
>  #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
> +			"1m(nor_bank0_fman_uconde),"\
> +			"40m@1100000(nor_bank0_fit)," \
> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
> -			"40m(nor_bank4_fit);7e800000.flash:" \
> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>  			"4m(nand_uboot),36m(nand_kernel)," \
>  			"472m(nand_free);spi0.0:2m(uboot)," \
>  			"14m(free)"
>

Wenbin,

Maybe you can use more generic partitions for the NOR and put more 
detail in comment. I believe the RCW, U-Boot, Env, Fman ucode, PPA are 
at fixed locations. But the rest is up to user. We cannot assume the 
layout is identical to SDK. Same goes to NAND partitions.

York
Wenbin song March 17, 2017, 1:05 a.m. UTC | #2
Hi york,

Do you mean it is not necessary  to supply so much partitions for user, just supplying two partitions, one is reserved for firmware(including RCW, U-boot, Env, PPA, kernel.itb and so on), the other  is the rest of flashes, if not, Could you give me more details?

Best Regards
Wenbin Song



-----Original Message-----
From: york sun 
Sent: Thursday, March 16, 2017 1:14 AM
To: Wenbin Song <wenbin.song@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; sjg@chromium.org; Z.Q. Hou <zhiqiang.hou@nxp.com>; M.H. Lian <minghuan.lian@nxp.com>; u-boot@lists.denx.de
Subject: Re: [PATCH] armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on Nor flash

On 03/13/2017 11:06 PM, Wenbin song wrote:
> Fix the offsets of MTD partitions on Nor flash on ls1043ardb, 
> ls1043aqds and ls1046aqds boards.
>
> Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
> ---
>  include/configs/ls1043a_common.h | 7 ++++---
>  include/configs/ls1046aqds.h     | 7 ++++---
>  2 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/include/configs/ls1043a_common.h 
> b/include/configs/ls1043a_common.h
> index c4b05e0..ca845b6 100644
> --- a/include/configs/ls1043a_common.h
> +++ b/include/configs/ls1043a_common.h
> @@ -192,10 +192,11 @@
>  #else
>  #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
> +			"1m(nor_bank0_fman_uconde),"\
> +			"40m@1100000(nor_bank0_fit)," \
> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
> -			"40m(nor_bank4_fit);7e800000.flash:" \
> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>  			"1m(nand_uboot),1m(nand_uboot_env)," \
>  			"20m(nand_fit);spi0.0:1m(uboot)," \
>  			"5m(kernel),1m(dtb),9m(file_system)"
> diff --git a/include/configs/ls1046aqds.h 
> b/include/configs/ls1046aqds.h index 4b3b21e..e045249 100644
> --- a/include/configs/ls1046aqds.h
> +++ b/include/configs/ls1046aqds.h
> @@ -487,10 +487,11 @@ unsigned long get_board_ddr_clk(void);  #else  
> #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
> +			"1m(nor_bank0_fman_uconde),"\
> +			"40m@1100000(nor_bank0_fit)," \
> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
> -			"40m(nor_bank4_fit);7e800000.flash:" \
> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>  			"4m(nand_uboot),36m(nand_kernel)," \
>  			"472m(nand_free);spi0.0:2m(uboot)," \
>  			"14m(free)"
>

Wenbin,

Maybe you can use more generic partitions for the NOR and put more detail in comment. I believe the RCW, U-Boot, Env, Fman ucode, PPA are at fixed locations. But the rest is up to user. We cannot assume the layout is identical to SDK. Same goes to NAND partitions.

York
York Sun March 17, 2017, 3:35 a.m. UTC | #3
On 03/16/2017 06:05 PM, Wenbin Song wrote:
> Hi york,
>
> Do you mean it is not necessary  to supply so much partitions for user, just supplying two partitions, one is reserved for firmware(including RCW, U-boot, Env, PPA, kernel.itb and so on), the other  is the rest of flashes, if not, Could you give me more details?

Wenbin,

I think it depends on what you expect users to do with those partitions. 
That's why I said you don't have use SDK layout.
If you don't expect users to modify (eg. RCW and/or U-Boot), you can 
mark them as "ro". For some space, if you are not sure if the FIT image 
will be there, you can skip it. That's the benefit of using offsets.

York

>
> Best Regards
> Wenbin Song
>
>
>
> -----Original Message-----
> From: york sun
> Sent: Thursday, March 16, 2017 1:14 AM
> To: Wenbin Song <wenbin.song@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; sjg@chromium.org; Z.Q. Hou <zhiqiang.hou@nxp.com>; M.H. Lian <minghuan.lian@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [PATCH] armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on Nor flash
>
> On 03/13/2017 11:06 PM, Wenbin song wrote:
>> Fix the offsets of MTD partitions on Nor flash on ls1043ardb,
>> ls1043aqds and ls1046aqds boards.
>>
>> Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
>> ---
>>  include/configs/ls1043a_common.h | 7 ++++---
>>  include/configs/ls1046aqds.h     | 7 ++++---
>>  2 files changed, 8 insertions(+), 6 deletions(-)
>>
>> diff --git a/include/configs/ls1043a_common.h
>> b/include/configs/ls1043a_common.h
>> index c4b05e0..ca845b6 100644
>> --- a/include/configs/ls1043a_common.h
>> +++ b/include/configs/ls1043a_common.h
>> @@ -192,10 +192,11 @@
>>  #else
>>  #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
>> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
>> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>> +			"1m(nor_bank0_fman_uconde),"\
>> +			"40m@1100000(nor_bank0_fit)," \
>> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
>> -			"40m(nor_bank4_fit);7e800000.flash:" \
>> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>>  			"1m(nand_uboot),1m(nand_uboot_env)," \
>>  			"20m(nand_fit);spi0.0:1m(uboot)," \
>>  			"5m(kernel),1m(dtb),9m(file_system)"
>> diff --git a/include/configs/ls1046aqds.h
>> b/include/configs/ls1046aqds.h index 4b3b21e..e045249 100644
>> --- a/include/configs/ls1046aqds.h
>> +++ b/include/configs/ls1046aqds.h
>> @@ -487,10 +487,11 @@ unsigned long get_board_ddr_clk(void);  #else
>> #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
>>  			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
>> -			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
>> -			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>> +			"1m(nor_bank0_fman_uconde),"\
>> +			"40m@1100000(nor_bank0_fit)," \
>> +			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
>>  			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
>> -			"40m(nor_bank4_fit);7e800000.flash:" \
>> +			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
>>  			"4m(nand_uboot),36m(nand_kernel)," \
>>  			"472m(nand_free);spi0.0:2m(uboot)," \
>>  			"14m(free)"
>>
>
> Wenbin,
>
> Maybe you can use more generic partitions for the NOR and put more detail in comment. I believe the RCW, U-Boot, Env, Fman ucode, PPA are at fixed locations. But the rest is up to user. We cannot assume the layout is identical to SDK. Same goes to NAND partitions.
>
> York
>
diff mbox

Patch

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index c4b05e0..ca845b6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -192,10 +192,11 @@ 
 #else
 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
 			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
-			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
-			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
+			"1m(nor_bank0_fman_uconde),"\
+			"40m@1100000(nor_bank0_fit)," \
+			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
 			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
-			"40m(nor_bank4_fit);7e800000.flash:" \
+			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
 			"1m(nand_uboot),1m(nand_uboot_env)," \
 			"20m(nand_fit);spi0.0:1m(uboot)," \
 			"5m(kernel),1m(dtb),9m(file_system)"
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 4b3b21e..e045249 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -487,10 +487,11 @@  unsigned long get_board_ddr_clk(void);
 #else
 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
 			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
-			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
-			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
+			"1m(nor_bank0_fman_uconde),"\
+			"40m@1100000(nor_bank0_fit)," \
+			"1m@4000000(nor_bank4_rcw),1m(nor_bank4_uboot)," \
 			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
-			"40m(nor_bank4_fit);7e800000.flash:" \
+			"40m@5100000(nor_bank4_fit);7e800000.flash:" \
 			"4m(nand_uboot),36m(nand_kernel)," \
 			"472m(nand_free);spi0.0:2m(uboot)," \
 			"14m(free)"