[v7,07/10] skiboot: Add opal call to enable/disable Nest IMC

Submitted by Madhavan Srinivasan on March 9, 2017, 5:08 a.m.

Details

Message ID 1489036089-6529-8-git-send-email-maddy@linux.vnet.ibm.com
State New
Headers show

Commit Message

Madhavan Srinivasan March 9, 2017, 5:08 a.m.
From: Hemant Kumar <hemant@linux.vnet.ibm.com>

Add a new opal call to start/stop the Nest IMC microcode running in the
OCC complex based on the "operation" parameter. Also, check the status
from the control block structure before starting/stopping the IMC
microcode.

Adds two operations for the Nest IMC microcode to opal-api :
OPAL_NEST_IMC_STOP : Stop the nest IMC PMU counters collection
OPAL_NEST_IMC_START : Start the nest IMC PMU counters

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
[maddy: fixed the opal call number]
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
 hw/imc.c           | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/opal-api.h |  9 ++++++++-
 2 files changed, 63 insertions(+), 1 deletion(-)

Patch hide | download patch | download mbox

diff --git a/hw/imc.c b/hw/imc.c
index 76b9659b752d..ba768a58a7ac 100644
--- a/hw/imc.c
+++ b/hw/imc.c
@@ -255,3 +255,58 @@  err:
 	prerror("IMC Devices not added\n");
 	free(buf);
 }
+
+/*
+ * opal_nest_imc_counters_control : This call controls the nest IMC microcode.
+ *
+ * mode      : For now, this call supports only NEST_IMC_PRODUCTION_MODE.
+ *             This mode can start/stop the Nest IMC Microcode for nest
+ *             instrumentation from Host OS.
+ * operation : Start(0x0) or Stop(0x1) the engine.
+ *
+ * This call can be extended to include more operations to use the multiple
+ * debug modes provided by the nest IMC microcode and the parameters value_1
+ * and value_2 for the same purpose.
+ */
+static int64_t opal_nest_imc_counters_control(uint64_t mode,
+					      uint64_t operation,
+					      uint64_t value_1,
+					      uint64_t value_2)
+{
+	u64 op, status;
+	struct imc_chip_cb *cb;
+
+	if ((mode != NEST_IMC_PRODUCTION_MODE) || value_1 || value_2)
+		return OPAL_PARAMETER;
+
+	/* Fetch the IMC control block structure */
+	cb = get_imc_cb();
+	status = be64_to_cpu(cb->imc_chip_run_status);
+
+	switch (operation) {
+	case OPAL_NEST_IMC_STOP:
+		/* Check whether the engine is already stopped */
+		if (status == NEST_IMC_PAUSE)
+			return OPAL_SUCCESS;
+
+		op = NEST_IMC_DISABLE;
+		break;
+	case OPAL_NEST_IMC_START:
+		/* Check whether the engine is already running */
+		if (status == NEST_IMC_RESUME)
+			return OPAL_SUCCESS;
+
+		op = NEST_IMC_ENABLE;
+		break;
+	default:
+		prerror("IMC: unknown operation for nest imc\n");
+		return OPAL_PARAMETER;
+	}
+
+	/* Write the command to the control block now */
+	cb->imc_chip_command = op;
+
+	return OPAL_SUCCESS;
+}
+
+opal_call(OPAL_NEST_IMC_COUNTERS_CONTROL, opal_nest_imc_counters_control, 4);
diff --git a/include/opal-api.h b/include/opal-api.h
index 96e86e211694..3e66db3d53f5 100644
--- a/include/opal-api.h
+++ b/include/opal-api.h
@@ -200,7 +200,8 @@ 
 #define OPAL_XIVE_DUMP				142
 #define OPAL_XIVE_RESERVED3			143
 #define OPAL_XIVE_RESERVED4			144
-#define OPAL_LAST				144
+#define OPAL_NEST_IMC_COUNTERS_CONTROL		145
+#define OPAL_LAST				145
 
 /* Device tree flags */
 
@@ -1137,6 +1138,12 @@  enum {
 	XIVE_DUMP_EMU_STATE	= 5,
 };
 
+/* Operation argument to Nest IMC Microcode */
+enum {
+	OPAL_NEST_IMC_STOP,
+	OPAL_NEST_IMC_START,
+};
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_API_H */