[2/2] ARM: dts: am335x-icev2: Add SPI based NOR

Submitted by Cooper Jr., Franklin on March 7, 2017, 9:57 p.m.

Details

Message ID 20170307215751.29266-3-fcooper@ti.com
State New
Delegated to: Cyrille Pitchen
Headers show

Commit Message

Cooper Jr., Franklin March 7, 2017, 9:57 p.m.
Enable support for W25Q64CVSSIG which is a Winbond 64 Mbit SPI NOR.

At boot you will see the following message:
m25p80 spi1.0: found s25fl064k, expected w25q64

This is because the JEDEC ID for this chip is the same as s25fl064k.
However, this should be harmless since both chips are essentially the
same.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/boot/dts/am335x-icev2.dts | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Patch hide | download patch | download mbox

diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index a2ad076..1e643dc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -245,6 +245,39 @@ 
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "u-boot";
+			reg = <0x80000 0x100000>;
+			read-only;
+		};
+
+		partition@2 {
+			label = "u-boot-env";
+			reg = <0x180000 0x20000>;
+			read-only;
+		};
+
+		partition@3 {
+			label = "misc";
+			reg = <0x1A0000 0x660000>;
+		};
+	};
+
 };
 
 &tscadc {