Message ID | 1488233771-5322-1-git-send-email-thomas.petazzoni@free-electrons.com |
---|---|
State | Accepted |
Commit | 39b5a72ee504f146c8d395048f6784ffdc23924b |
Headers | show |
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: > In commit a75ab1fc1dcc7eee8668b1c3c19b703f1390b2cd ("package/classpath: > Don't depend on jamvm"), we removed the dependency of classpath on > jamvm. Since jamvm is only available for a reduced set of architectures, > classpath could until this commit until be built on those architectures. > However, now that this dependency has been removed, classpath can > potentially be built for all architectures supported by Buildroot, even > though it doesn't support all of them. > Since adding support for additional architectures in classpath doesn't > make much sense, because classpath is in Buildroot only usable with > JamVM anyway, and JamVM is only available for a small set of > architectures, this commit simply makes classpath available on the > architectures that it supports. > By doing so, it also removes the or1k support patch which was added by > commit f12a146f817c8ef07a7d41a31a5336b5ef6a96e8, since anyway or1k is > not supported by JamVM. > Fixes: > http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/ > (classpath on microblaze) > http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/ > (classpath on nios2) > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Committed, thanks.
Hello Thomas, On 27.02.2017 23:16, Thomas Petazzoni wrote: > In commit a75ab1fc1dcc7eee8668b1c3c19b703f1390b2cd ("package/classpath: > Don't depend on jamvm"), we removed the dependency of classpath on > jamvm. Since jamvm is only available for a reduced set of architectures, > classpath could until this commit until be built on those architectures. > > However, now that this dependency has been removed, classpath can > potentially be built for all architectures supported by Buildroot, even > though it doesn't support all of them. > > Since adding support for additional architectures in classpath doesn't > make much sense, because classpath is in Buildroot only usable with > JamVM anyway, and JamVM is only available for a small set of > architectures, this commit simply makes classpath available on the > architectures that it supports. > > By doing so, it also removes the or1k support patch which was added by > commit f12a146f817c8ef07a7d41a31a5336b5ef6a96e8, since anyway or1k is > not supported by JamVM. > > Fixes: > > http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/ > (classpath on microblaze) > > http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/ > (classpath on nios2) > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > package/classpath/0003-add-or1k-endian.patch | 18 ------------------ > package/classpath/Config.in | 8 ++++++++ > package/jamvm/Config.in | 2 ++ > 3 files changed, 10 insertions(+), 18 deletions(-) > delete mode 100644 package/classpath/0003-add-or1k-endian.patch > > diff --git a/package/classpath/0003-add-or1k-endian.patch b/package/classpath/0003-add-or1k-endian.patch > deleted file mode 100644 > index 8bc8784..0000000 > --- a/package/classpath/0003-add-or1k-endian.patch > +++ /dev/null > @@ -1,18 +0,0 @@ > -Set endianess for or1k > - > -Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> > - > -diff -Nur classpath-0.98.orig/native/fdlibm/ieeefp.h classpath-0.98/native/fdlibm/ieeefp.h > ---- classpath-0.98.orig/native/fdlibm/ieeefp.h 2008-01-13 18:33:50.000000000 +0100 > -+++ classpath-0.98/native/fdlibm/ieeefp.h 2017-02-26 12:39:12.316327363 +0100 > -@@ -123,6 +123,10 @@ > - #define __IEEE_BIG_ENDIAN > - #endif > - > -+#ifdef __or1k__ > -+#define __IEEE_BIG_ENDIAN > -+#endif > -+ > - #ifdef __v800 > - #define __IEEE_LITTLE_ENDIAN > - #endif > diff --git a/package/classpath/Config.in b/package/classpath/Config.in > index caab619..c49ff7a 100644 > --- a/package/classpath/Config.in > +++ b/package/classpath/Config.in > @@ -1,7 +1,15 @@ > +config BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS > + bool > + default y if BR2_arm || BR2_armeb || BR2_i386 || BR2_m68k \ > + || BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el \ > + || BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le \ > + || BR2_sh || BR2_x86_64 I just tested with the test-pkg script and I also get successful sparc and sparc64 builds. Any particular reason to not enable it there? I'll also test again if there is any change for the bumped 0.99 version. > + > config BR2_PACKAGE_CLASSPATH > bool "classpath" > select BR2_NEEDS_HOST_JAR > select BR2_NEEDS_HOST_JAVAC > + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS > help > GNU Classpath, Essential Libraries for Java, is a GNU > project to create free core class libraries for use with > diff --git a/package/jamvm/Config.in b/package/jamvm/Config.in > index 2cc97a1..57e1a8e 100644 > --- a/package/jamvm/Config.in > +++ b/package/jamvm/Config.in > @@ -4,6 +4,7 @@ config BR2_PACKAGE_JAMVM > depends on !BR2_STATIC_LIBS > depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_x86_64 \ > || BR2_mips || BR2_mipsel || BR2_powerpc > + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS > select BR2_PACKAGE_ZLIB > select BR2_PACKAGE_CLASSPATH > help > @@ -15,4 +16,5 @@ config BR2_PACKAGE_JAMVM > comment "jamvm needs a toolchain w/ threads, dynamic library" > depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_x86_64 \ > || BR2_mips || BR2_mipsel || BR2_powerpc > + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS > depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS > Best wishes, Marcus
On 28.02.2017 12:13, Marcus Hoffmann wrote: > Hello Thomas, > > On 27.02.2017 23:16, Thomas Petazzoni wrote: >> --- a/package/classpath/Config.in >> +++ b/package/classpath/Config.in >> @@ -1,7 +1,15 @@ >> +config BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS >> + bool >> + default y if BR2_arm || BR2_armeb || BR2_i386 || BR2_m68k \ >> + || BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el \ >> + || BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le \ >> + || BR2_sh || BR2_x86_64 > > I just tested with the test-pkg script and I also get successful sparc > and sparc64 builds. Any particular reason to not enable it there? > > I'll also test again if there is any change for the bumped 0.99 version. No change there. Marcus
Hello, On Tue, 28 Feb 2017 12:13:17 +0100, Marcus Hoffmann wrote: > > + default y if BR2_arm || BR2_armeb || BR2_i386 || BR2_m68k \ > > + || BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el \ > > + || BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le \ > > + || BR2_sh || BR2_x86_64 > > I just tested with the test-pkg script and I also get successful sparc > and sparc64 builds. Any particular reason to not enable it there? I indeed missed sparc/sparc64 when looking through native/fdlibm/ieeefp.h, so feel free to send a patch re-enabling classpath on those architectures. However, in practice, jamvm doesn't support sparc/sparc64, so you'll be able to build classpath, but not jamvm, which is not a very useful result. Best regards, Thomas
diff --git a/package/classpath/0003-add-or1k-endian.patch b/package/classpath/0003-add-or1k-endian.patch deleted file mode 100644 index 8bc8784..0000000 --- a/package/classpath/0003-add-or1k-endian.patch +++ /dev/null @@ -1,18 +0,0 @@ -Set endianess for or1k - -Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> - -diff -Nur classpath-0.98.orig/native/fdlibm/ieeefp.h classpath-0.98/native/fdlibm/ieeefp.h ---- classpath-0.98.orig/native/fdlibm/ieeefp.h 2008-01-13 18:33:50.000000000 +0100 -+++ classpath-0.98/native/fdlibm/ieeefp.h 2017-02-26 12:39:12.316327363 +0100 -@@ -123,6 +123,10 @@ - #define __IEEE_BIG_ENDIAN - #endif - -+#ifdef __or1k__ -+#define __IEEE_BIG_ENDIAN -+#endif -+ - #ifdef __v800 - #define __IEEE_LITTLE_ENDIAN - #endif diff --git a/package/classpath/Config.in b/package/classpath/Config.in index caab619..c49ff7a 100644 --- a/package/classpath/Config.in +++ b/package/classpath/Config.in @@ -1,7 +1,15 @@ +config BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS + bool + default y if BR2_arm || BR2_armeb || BR2_i386 || BR2_m68k \ + || BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el \ + || BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le \ + || BR2_sh || BR2_x86_64 + config BR2_PACKAGE_CLASSPATH bool "classpath" select BR2_NEEDS_HOST_JAR select BR2_NEEDS_HOST_JAVAC + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS help GNU Classpath, Essential Libraries for Java, is a GNU project to create free core class libraries for use with diff --git a/package/jamvm/Config.in b/package/jamvm/Config.in index 2cc97a1..57e1a8e 100644 --- a/package/jamvm/Config.in +++ b/package/jamvm/Config.in @@ -4,6 +4,7 @@ config BR2_PACKAGE_JAMVM depends on !BR2_STATIC_LIBS depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_x86_64 \ || BR2_mips || BR2_mipsel || BR2_powerpc + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS select BR2_PACKAGE_ZLIB select BR2_PACKAGE_CLASSPATH help @@ -15,4 +16,5 @@ config BR2_PACKAGE_JAMVM comment "jamvm needs a toolchain w/ threads, dynamic library" depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_x86_64 \ || BR2_mips || BR2_mipsel || BR2_powerpc + depends on BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS
In commit a75ab1fc1dcc7eee8668b1c3c19b703f1390b2cd ("package/classpath: Don't depend on jamvm"), we removed the dependency of classpath on jamvm. Since jamvm is only available for a reduced set of architectures, classpath could until this commit until be built on those architectures. However, now that this dependency has been removed, classpath can potentially be built for all architectures supported by Buildroot, even though it doesn't support all of them. Since adding support for additional architectures in classpath doesn't make much sense, because classpath is in Buildroot only usable with JamVM anyway, and JamVM is only available for a small set of architectures, this commit simply makes classpath available on the architectures that it supports. By doing so, it also removes the or1k support patch which was added by commit f12a146f817c8ef07a7d41a31a5336b5ef6a96e8, since anyway or1k is not supported by JamVM. Fixes: http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/ (classpath on microblaze) http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/ (classpath on nios2) Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- package/classpath/0003-add-or1k-endian.patch | 18 ------------------ package/classpath/Config.in | 8 ++++++++ package/jamvm/Config.in | 2 ++ 3 files changed, 10 insertions(+), 18 deletions(-) delete mode 100644 package/classpath/0003-add-or1k-endian.patch