| Message ID | 20170224125946.7500-10-afd@ti.com |
|---|---|
| State | Superseded |
| Delegated to: | Tom Rini |
| Headers | show |
On Fri, Feb 24, 2017 at 06:59:46AM -0600, Andrew F. Davis wrote: > TI K2HK secure devices have to be built with TI_SECURE_DEVICE, FIT, and > FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > configs/k2hk_hs_evm_defconfig | 51 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 configs/k2hk_hs_evm_defconfig Same comments as 8/9, thanks! > > diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig > new file mode 100644 > index 0000000000..9fe91ea19c > --- /dev/null > +++ b/configs/k2hk_hs_evm_defconfig > @@ -0,0 +1,51 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_KEYSTONE=y > +CONFIG_SYS_TEXT_BASE=0x0c000060 > +CONFIG_TARGET_K2HK_EVM=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm" > +CONFIG_FIT=y > +CONFIG_FIT_IMAGE_POST_PROCESS=y > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_SYS_CONSOLE_INFO_QUIET=y > +CONFIG_VERSION_VARIABLE=y > +CONFIG_HUSH_PARSER=y > +CONFIG_SYS_PROMPT="K2HK EVM # " > +CONFIG_CMD_BOOTZ=y > +# CONFIG_CMD_IMLS is not set > +CONFIG_CMD_ASKENV=y > +# CONFIG_CMD_FLASH is not set > +CONFIG_CMD_NAND=y > +CONFIG_CMD_PART=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SPI=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_USB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_DHCP=y > +CONFIG_CMD_MII=y > +CONFIG_CMD_PING=y > +CONFIG_CMD_EXT2=y > +CONFIG_CMD_EXT4=y > +CONFIG_CMD_EXT4_WRITE=y > +CONFIG_CMD_FAT=y > +CONFIG_CMD_FS_GENERIC=y > +CONFIG_CMD_UBI=y > +CONFIG_ISO_PARTITION=y > +CONFIG_EFI_PARTITION=y > +CONFIG_OF_CONTROL=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_DM=y > +CONFIG_TI_AEMIF=y > +# CONFIG_MMC is not set > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_STMICRO=y > +CONFIG_DM_ETH=y > +CONFIG_DM_SERIAL=y > +CONFIG_SYS_NS16550=y > +CONFIG_DM_SPI=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_STORAGE=y > -- > 2.11.0 >
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig new file mode 100644 index 0000000000..9fe91ea19c --- /dev/null +++ b/configs/k2hk_hs_evm_defconfig @@ -0,0 +1,51 @@ +CONFIG_ARM=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_SYS_TEXT_BASE=0x0c000060 +CONFIG_TARGET_K2HK_EVM=y +CONFIG_TI_SECURE_DEVICE=y +CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm" +CONFIG_FIT=y +CONFIG_FIT_IMAGE_POST_PROCESS=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_VERSION_VARIABLE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="K2HK EVM # " +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_PART=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_TI_AEMIF=y +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DM_ETH=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y
TI K2HK secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com> --- configs/k2hk_hs_evm_defconfig | 51 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 configs/k2hk_hs_evm_defconfig