diff mbox

[U-Boot,RESEND,4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone

Message ID 20170224125946.7500-5-afd@ti.com
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Andrew Davis Feb. 24, 2017, 12:59 p.m. UTC 
From: Madan Srinivas <madans@ti.com>

As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image
name for secure K2 devices, for all boot modes other than SPI flash.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/mach-omap2/config_secure.mk | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Tom Rini Feb. 27, 2017, 3:18 p.m. UTC | #1 
On Fri, Feb 24, 2017 at 06:59:41AM -0600, Andrew F. Davis wrote:

> From: Madan Srinivas <madans@ti.com>
> 
> As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image
> name for secure K2 devices, for all boot modes other than SPI flash.
> 
> Signed-off-by: Madan Srinivas <madans@ti.com>
> Signed-off-by: Andrew F. Davis <afd@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
index 0c843338d7..0346cb93ab 100644
--- a/arch/arm/mach-omap2/config_secure.mk
+++ b/arch/arm/mach-omap2/config_secure.mk
@@ -77,6 +77,12 @@  u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE
 u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkomapsecimg)
 
+# For supporting single stage boot on keystone, the image is a full u-boot
+# file, not an SPL. This will work for all boot devices, other than SPI
+# flash
+u-boot_HS_MLO: $(obj)/u-boot.bin
+	$(call if_changed,mkomapsecimg)
+
 # For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
 # file, not an SPL. In this case the mkomapsecimg command looks for a
 # u-boot-HS_* prefix