@@ -168,22 +168,6 @@ After board configuration is done, fdt supported u-boot can be build in two ways
$ make DEVICE_TREE=<dts-file-name>
-Configuration Options
----------------------
-
-A number of run-time configuration options are provided in the /config node
-of the control device tree. You can access these using fdtdec_get_config_int(),
-fdtdec_get_config_bool() and fdtdec_get_config_string().
-
-Available options are:
-
-silent-console
- If present and non-zero, the console is silenced by default on boot.
-
-no-keyboard
- Tells U-Boot not to expect an attached keyboard with a VGA console
-
-
Limitations
-----------
new file mode 100644
@@ -0,0 +1,22 @@
+The /config node (Configuration Options)
+----------------------------------------
+
+A number of run-time configuration options are provided in the /config node
+of the control device tree. You can access these using fdtdec_get_config_int(),
+fdtdec_get_config_bool() and fdtdec_get_config_string().
+
+Available options are:
+
+silent-console
+ If present and non-zero, the console is silenced by default on boot.
+
+no-keyboard
+ Tells U-Boot not to expect an attached keyboard with a VGA console
+
+u-boot,efi-partition-entries-offset
+ If present, this provides an offset (in bytes, from the start of a
+ device) that should be skipped over before the partition entries.
+ This is used by the EFI/GPT partition implementation when a device
+ is formatted.
+
+ This setting will override any values configured via Kconfig.
This moves the description of the /config node from README.fdt-control into a separate file doc/device-tree-bindings/config.txt and adds the documentation on the new u-boot,efi-partition-entries-offset property (which overrides CONFIG_EFI_PARTITION_ENTRIES_OFF, if present). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> --- doc/README.fdt-control | 16 ---------------- doc/device-tree-bindings/config.txt | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 16 deletions(-) create mode 100644 doc/device-tree-bindings/config.txt