diff mbox

net/hsr: use eth_hw_addr_random()

Message ID 20170221130459.5873-1-tklauser@distanz.ch
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Tobias Klauser Feb. 21, 2017, 1:04 p.m. UTC 
Use eth_hw_addr_random() to set a random MAC address in order to make sure
dev->addr_assign_type will be properly set to NET_ADDR_RANDOM.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---
 net/hsr/hsr_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

David Miller Feb. 21, 2017, 6:25 p.m. UTC | #1 
From: Tobias Klauser <tklauser@distanz.ch>
Date: Tue, 21 Feb 2017 14:04:59 +0100

> Use eth_hw_addr_random() to set a random MAC address in order to make sure
> dev->addr_assign_type will be properly set to NET_ADDR_RANDOM.
> 
> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>

Applied.
diff mbox

Patch

diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c
index fc65b145f6e7..c73160fb11e7 100644
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -395,7 +395,7 @@  static struct device_type hsr_type = {
 
 void hsr_dev_setup(struct net_device *dev)
 {
-	random_ether_addr(dev->dev_addr);
+	eth_hw_addr_random(dev);
 
 	ether_setup(dev);
 	dev->min_mtu = 0;