Message ID | 20170217182830.32618-3-l.stach@pengutronix.de |
---|---|
State | Changes Requested, archived |
Headers | show |
On Fri, 2017-02-17 at 19:28 +0100, Lucas Stach wrote: > The Prefetch Resolve Engine is a prefetch and tile resolve engine > which prefetches display data from DRAM to an internal SRAM region. > It has a single clock for configuration register access and the > functional units. A single shared interrupt is used for status and > error signaling. > > The only external dependency is the SRAM region to use for the > prefetch double buffer. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../bindings/display/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > index 971c3eedb1c7..1bd777d7c37d 100644 > --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > @@ -53,6 +53,32 @@ ipu: ipu@18000000 { > }; > }; > > +Freescale i.MX PRE (Prefetch Resolve Engine) > +============================================ > + > +Required properties: > +- compatible: should be "fsl,imx6qp-pre" > +- reg: should be register base and length as documented in the > + datasheet > +- clocks : phandle to the PRE axi clock input, as described > + in Documentation/devicetree/bindings/clock/clock-bindings.txt and > + Documentation/devicetree/bindings/clock/imx6q-clock.txt. > +- clock-names: should be "axi" > +- interrupts: should contain the PRE interrupt > +- fsl,ocram: phandle pointing to the mmio-sram device node, that should be > + used for the PRE SRAM double buffer. > + > +example: > + > +pre@021c8000 { > + compatible = "fsl,imx6qp-pre"; > + reg = <0x021c8000 0x1000>; > + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clks IMX6QDL_CLK_PRE0>; > + clock-names = "axi"; > + fsl,ocram = <&ocram2>; Nitpick: the CODA property for this is called iram. Should we do the same here in case the PRE is later used on other SoCs that call their on-chip SRAM differently? There is no mention of OCRAM in the PRE chapter in the i.MX6QP reference manual, but Figures 38-1 and 38-5 mention an "IRAM Double Buffer". > +}; > + > Parallel display support > ======================== > regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 17, 2017 at 07:28:23PM +0100, Lucas Stach wrote: > The Prefetch Resolve Engine is a prefetch and tile resolve engine > which prefetches display data from DRAM to an internal SRAM region. > It has a single clock for configuration register access and the > functional units. A single shared interrupt is used for status and > error signaling. > > The only external dependency is the SRAM region to use for the > prefetch double buffer. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../bindings/display/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > index 971c3eedb1c7..1bd777d7c37d 100644 > --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt > @@ -53,6 +53,32 @@ ipu: ipu@18000000 { > }; > }; > > +Freescale i.MX PRE (Prefetch Resolve Engine) > +============================================ > + > +Required properties: > +- compatible: should be "fsl,imx6qp-pre" > +- reg: should be register base and length as documented in the > + datasheet > +- clocks : phandle to the PRE axi clock input, as described > + in Documentation/devicetree/bindings/clock/clock-bindings.txt and > + Documentation/devicetree/bindings/clock/imx6q-clock.txt. > +- clock-names: should be "axi" > +- interrupts: should contain the PRE interrupt > +- fsl,ocram: phandle pointing to the mmio-sram device node, that should be > + used for the PRE SRAM double buffer. > + > +example: > + > +pre@021c8000 { Drop the leading 0. > + compatible = "fsl,imx6qp-pre"; > + reg = <0x021c8000 0x1000>; > + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clks IMX6QDL_CLK_PRE0>; > + clock-names = "axi"; > + fsl,ocram = <&ocram2>; > +}; > + > Parallel display support > ======================== > > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index 971c3eedb1c7..1bd777d7c37d 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -53,6 +53,32 @@ ipu: ipu@18000000 { }; }; +Freescale i.MX PRE (Prefetch Resolve Engine) +============================================ + +Required properties: +- compatible: should be "fsl,imx6qp-pre" +- reg: should be register base and length as documented in the + datasheet +- clocks : phandle to the PRE axi clock input, as described + in Documentation/devicetree/bindings/clock/clock-bindings.txt and + Documentation/devicetree/bindings/clock/imx6q-clock.txt. +- clock-names: should be "axi" +- interrupts: should contain the PRE interrupt +- fsl,ocram: phandle pointing to the mmio-sram device node, that should be + used for the PRE SRAM double buffer. + +example: + +pre@021c8000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021c8000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE0>; + clock-names = "axi"; + fsl,ocram = <&ocram2>; +}; + Parallel display support ========================
The Prefetch Resolve Engine is a prefetch and tile resolve engine which prefetches display data from DRAM to an internal SRAM region. It has a single clock for configuration register access and the functional units. A single shared interrupt is used for status and error signaling. The only external dependency is the SRAM region to use for the prefetch double buffer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../bindings/display/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+)