| Message ID | 1487242002-9701-1-git-send-email-florent.jacquet@free-electrons.com |
|---|---|
| State | Accepted |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: > This enables the support for the Allwinner A23 Evaluation Board (EVB), > that already had a device tree (from Linux) but no defconfig. > > This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an > accelerometer and light sensor, as well as a USB HSIC hub and a USB > OTG mini-USB connector. It also has a Wifi/BT chip. > > Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done > through dedicated pin headers. > > Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> > Cc: Jagan Teki <jagan@openedev.com> > Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Thanks! Maxime
On 16/02/2017 19:32, Maxime Ripard wrote: > On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: >> This enables the support for the Allwinner A23 Evaluation Board (EVB), >> that already had a device tree (from Linux) but no defconfig. >> >> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an >> accelerometer and light sensor, as well as a USB HSIC hub and a USB >> OTG mini-USB connector. It also has a Wifi/BT chip. >> >> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done >> through dedicated pin headers. >> >> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> >> Cc: Jagan Teki <jagan@openedev.com> >> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> > > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > Thanks! > Maxime > Hello, Any updates on this patch? Thanks Florent
On 06/03/2017 13:19, Florent Jacquet wrote: > On 16/02/2017 19:32, Maxime Ripard wrote: >> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: >>> This enables the support for the Allwinner A23 Evaluation Board (EVB), >>> that already had a device tree (from Linux) but no defconfig. >>> >>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an >>> accelerometer and light sensor, as well as a USB HSIC hub and a USB >>> OTG mini-USB connector. It also has a Wifi/BT chip. >>> >>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done >>> through dedicated pin headers. >>> >>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> >>> Cc: Jagan Teki <jagan@openedev.com> >>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> >> >> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> >> >> Thanks! >> Maxime >> > > Hello, > > Any updates on this patch? > > Thanks > Florent > Hello, Has somebody any news concerning this patch? Thanks Florent
On 13/03/2017 09:42, Florent Jacquet wrote: > On 06/03/2017 13:19, Florent Jacquet wrote: >> On 16/02/2017 19:32, Maxime Ripard wrote: >>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: >>>> This enables the support for the Allwinner A23 Evaluation Board (EVB), >>>> that already had a device tree (from Linux) but no defconfig. >>>> >>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an >>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB >>>> OTG mini-USB connector. It also has a Wifi/BT chip. >>>> >>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done >>>> through dedicated pin headers. >>>> >>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> >>>> Cc: Jagan Teki <jagan@openedev.com> >>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> >>> >>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> >>> >>> Thanks! >>> Maxime >>> >> >> Hello, >> >> Any updates on this patch? >> >> Thanks >> Florent >> > > Hello, > > Has somebody any news concerning this patch? > > Thanks > Florent > Hello, Has someone seen this patch? Is there any update? Regards Florent
On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote: > On 13/03/2017 09:42, Florent Jacquet wrote: > > On 06/03/2017 13:19, Florent Jacquet wrote: > >> On 16/02/2017 19:32, Maxime Ripard wrote: > >>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: > >>>> This enables the support for the Allwinner A23 Evaluation Board (EVB), > >>>> that already had a device tree (from Linux) but no defconfig. > >>>> > >>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an > >>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB > >>>> OTG mini-USB connector. It also has a Wifi/BT chip. > >>>> > >>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done > >>>> through dedicated pin headers. > >>>> > >>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> > >>>> Cc: Jagan Teki <jagan@openedev.com> > >>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> > >>> > >>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > >>> > >>> Thanks! > >>> Maxime > >>> > >> > >> Hello, > >> > >> Any updates on this patch? > >> > >> Thanks > >> Florent > >> > > > > Hello, > > > > Has somebody any news concerning this patch? > > > > Thanks > > Florent > > > > Hello, > > Has someone seen this patch? Is there any update? Jagan, could you apply this please? Thanks, Maxime
1;4601;0c On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote: > On 13/03/2017 09:42, Florent Jacquet wrote: > > On 06/03/2017 13:19, Florent Jacquet wrote: > >> On 16/02/2017 19:32, Maxime Ripard wrote: > >>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: > >>>> This enables the support for the Allwinner A23 Evaluation Board (EVB), > >>>> that already had a device tree (from Linux) but no defconfig. > >>>> > >>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an > >>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB > >>>> OTG mini-USB connector. It also has a Wifi/BT chip. > >>>> > >>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done > >>>> through dedicated pin headers. > >>>> > >>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> > >>>> Cc: Jagan Teki <jagan@openedev.com> > >>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> > >>> > >>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > >>> > >>> Thanks! > >>> Maxime > >>> > >> > >> Hello, > >> > >> Any updates on this patch? > >> > >> Thanks > >> Florent > >> > > > > Hello, > > > > Has somebody any news concerning this patch? > > > > Thanks > > Florent > > > > Hello, > > Has someone seen this patch? Is there any update? I just applied it. Maxime
On 20/03/2017 19:58, Maxime Ripard wrote: > 1;4601;0c > On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote: >> On 13/03/2017 09:42, Florent Jacquet wrote: >>> On 06/03/2017 13:19, Florent Jacquet wrote: >>>> On 16/02/2017 19:32, Maxime Ripard wrote: >>>>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: >>>>>> This enables the support for the Allwinner A23 Evaluation Board (EVB), >>>>>> that already had a device tree (from Linux) but no defconfig. >>>>>> >>>>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an >>>>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB >>>>>> OTG mini-USB connector. It also has a Wifi/BT chip. >>>>>> >>>>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done >>>>>> through dedicated pin headers. >>>>>> >>>>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> >>>>>> Cc: Jagan Teki <jagan@openedev.com> >>>>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> >>>>> >>>>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> >>>>> >>>>> Thanks! >>>>> Maxime >>>>> >>>> >>>> Hello, >>>> >>>> Any updates on this patch? >>>> >>>> Thanks >>>> Florent >>>> >>> >>> Hello, >>> >>> Has somebody any news concerning this patch? >>> >>> Thanks >>> Florent >>> >> >> Hello, >> >> Has someone seen this patch? Is there any update? > > I just applied it. > > Maxime > Thanks! :) Florent
diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig new file mode 100644 index 0000000..296df00 --- /dev/null +++ b/configs/sun8i_a23_evb_defconfig @@ -0,0 +1,19 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=63351 +CONFIG_USB0_VBUS_PIN="axp_drivebus" +CONFIG_USB0_VBUS_DET="axp_vbus_detect" +CONFIG_USB1_VBUS_PIN="PH7" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_USB_EHCI_HCD=y
This enables the support for the Allwinner A23 Evaluation Board (EVB), that already had a device tree (from Linux) but no defconfig. This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an accelerometer and light sensor, as well as a USB HSIC hub and a USB OTG mini-USB connector. It also has a Wifi/BT chip. Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done through dedicated pin headers. Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> --- configs/sun8i_a23_evb_defconfig | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 configs/sun8i_a23_evb_defconfig