diff mbox

[v2,3/3] mfd: wm831x: Add device tree binding document

Message ID 1486984514-29749-3-git-send-email-ckeepax@opensource.wolfsonmicro.com
State New
Headers show

Commit Message

Charles Keepax Feb. 13, 2017, 11:15 a.m. UTC
This is just a very simple initial binding, supporting only registering
the chip and the GPIOs. More features will be added as support for
device tree in the driver is expanded.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v1:
 - Added MAINTAINERS update

 Documentation/devicetree/bindings/mfd/wm831x.txt | 31 ++++++++++++++++++++++++
 MAINTAINERS                                      |  1 +
 2 files changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

Comments

Rob Herring Feb. 22, 2017, 3:15 p.m. UTC | #1
On Mon, Feb 13, 2017 at 11:15:14AM +0000, Charles Keepax wrote:
> This is just a very simple initial binding, supporting only registering
> the chip and the GPIOs. More features will be added as support for
> device tree in the driver is expanded.

Please make the binding as complete as you can. You don't have to have 
driver side support in place. Doesn't have to be everything, but at 
least everything you know you will need.

> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> 
> Changes since v1:
>  - Added MAINTAINERS update
> 
>  Documentation/devicetree/bindings/mfd/wm831x.txt | 31 ++++++++++++++++++++++++
>  MAINTAINERS                                      |  1 +
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
> new file mode 100644
> index 0000000..9771022
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
> @@ -0,0 +1,31 @@
> +Cirrus Logic/Wolfson Microelectronics wm831x PMICs
> +
> +System PMICs with a wide range of additional features.
> +
> +Required properties:
> +
> +  - compatible : One of the following chip-specific strings:
> +        "wlf,wm8310"
> +        "wlf,wm8311"
> +        "wlf,wm8312"
> +        "wlf,wm8320"
> +        "wlf,wm8321"
> +        "wlf,wm8325"
> +        "wlf,wm8326"
> +
> +  - reg : I2C slave address when connected using I2C, chip select number when
> +    using SPI.
> +
> +  - gpio-controller : Indicates this device is a GPIO controller.
> +  - #gpio-cells : Must be 2. The first cell is the pin number and the
> +    second cell is used to specify optional parameters (currently unused).
> +
> +Example:
> +
> +wm8310: wm8310@36 {

pmic@

> +	compatible = "wlf,wm8310";
> +	reg = <0x36>;
> +
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2d8ca28..48fdc82 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13363,6 +13363,7 @@ F:	Documentation/hwmon/wm83??
>  F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
>  F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
>  F:	Documentation/devicetree/bindings/mfd/arizona.txt
> +F:	Documentation/devicetree/bindings/mfd/wm831x.txt
>  F:	arch/arm/mach-s3c64xx/mach-crag6410*
>  F:	drivers/clk/clk-wm83*.c
>  F:	drivers/extcon/extcon-arizona.c
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Charles Keepax Feb. 22, 2017, 4:09 p.m. UTC | #2
On Wed, Feb 22, 2017 at 09:15:02AM -0600, Rob Herring wrote:
> On Mon, Feb 13, 2017 at 11:15:14AM +0000, Charles Keepax wrote:
> > This is just a very simple initial binding, supporting only registering
> > the chip and the GPIOs. More features will be added as support for
> > device tree in the driver is expanded.
> 
> Please make the binding as complete as you can. You don't have to have 
> driver side support in place. Doesn't have to be everything, but at 
> least everything you know you will need.
> 

I am happy to flush the binding out with a bit more detail,
although the GPIOs are actually all I need to use at the moment.
I will send a new revision with some more detail. Do we normally
do anything to mark the bits of the binding that are currently
un-implemented?

Thanks,
Charles
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
new file mode 100644
index 0000000..9771022
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -0,0 +1,31 @@ 
+Cirrus Logic/Wolfson Microelectronics wm831x PMICs
+
+System PMICs with a wide range of additional features.
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "wlf,wm8310"
+        "wlf,wm8311"
+        "wlf,wm8312"
+        "wlf,wm8320"
+        "wlf,wm8321"
+        "wlf,wm8325"
+        "wlf,wm8326"
+
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+Example:
+
+wm8310: wm8310@36 {
+	compatible = "wlf,wm8310";
+	reg = <0x36>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 2d8ca28..48fdc82 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13363,6 +13363,7 @@  F:	Documentation/hwmon/wm83??
 F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
+F:	Documentation/devicetree/bindings/mfd/wm831x.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c