deleted file mode 100644
@@ -1,46 +0,0 @@
-The GMP include is hardcoded to /usr/include causing obvious problems.
-
-From classpath CVS:
-http://cvs.savannah.gnu.org/viewvc/classpath/configure.ac?root=classpath&r1=1.245&r2=1.246
-
-[Gustavo: ditch -L or libtool complains loudly]
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
-
---- a/configure.ac 2010/01/30 01:33:50 1.245
-+++ b/configure.ac 2010/05/04 12:29:23 1.246
-@@ -752,10 +752,32 @@
- dnl __gmpz_mul_si for earlier versions (>= 3.1).
- dnl IMPORTANT: if you decide to look for __gmpz_combit, don't forget to
- dnl change the name of the corresponding ac_ variable on lines 860...
-+ AC_ARG_WITH(gmp, [ --with-gmp=PATH specify prefix directory for the installed GMP package.
-+ Equivalent to --with-gmp-include=PATH/include
-+ plus --with-gmp-lib=PATH/lib])
-+ AC_ARG_WITH(gmp_include, [ --with-gmp-include=PATH specify directory for installed GMP include files])
-+ AC_ARG_WITH(gmp_lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library])
-+
- if test "x${COMPILE_GMP}" = xyes; then
-+ AC_MSG_CHECKING([for GMP directories])
-+ if test "x$with_gmp" != x; then
-+ gmplibs="-lgmp"
-+ gmpinc="-I$with_gmp/include"
-+ if test "x$with_gmp_include" != x; then
-+ gmpinc="-I$with_gmp_include $gmpinc"
-+ fi
-+ if test "x$with_gmp_lib" != x; then
-+ gmplibs="$gmplibs"
-+ fi
-+ else
-+ with_gmp="/usr"
-+ gmplibs="-lgmp"
-+ gmpinc="-I/usr/include"
-+ fi
-+ AC_MSG_RESULT([prefix=$with_gmp, libs=$gmplibs, inc=$gmpinc])
- AC_CHECK_LIB(gmp, __gmpz_mul_si,
-- [GMP_CFLAGS=-I/usr/include
-- GMP_LIBS=-lgmp ],
-+ [GMP_CFLAGS="$gmpinc"
-+ GMP_LIBS="$gmplibs" ],
- [GMP_CFLAGS=
- GMP_LIBS= ])
- AC_SUBST(GMP_CFLAGS)
deleted file mode 100644
@@ -1,680 +0,0 @@
-Add config.rpath from upstream CVS to avoid (re)autoconfiguring errors.
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
-
-diff -Nura classpath-0.98.orig/config.rpath classpath-0.98/config.rpath
---- classpath-0.98.orig/config.rpath 1969-12-31 21:00:00.000000000 -0300
-+++ classpath-0.98/config.rpath 2013-07-10 09:36:51.894281025 -0300
-@@ -0,0 +1,672 @@
-+#! /bin/sh
-+# Output a system dependent set of variables, describing how to set the
-+# run time search path of shared libraries in an executable.
-+#
-+# Copyright 1996-2010 Free Software Foundation, Inc.
-+# Taken from GNU libtool, 2001
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This file is free software; the Free Software Foundation gives
-+# unlimited permission to copy and/or distribute it, with or without
-+# modifications, as long as this notice is preserved.
-+#
-+# The first argument passed to this file is the canonical host specification,
-+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-+# or
-+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-+# should be set by the caller.
-+#
-+# The set of defined variables is at the end of this script.
-+
-+# Known limitations:
-+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-+# than 256 bytes, otherwise the compiler driver will dump core. The only
-+# known workaround is to choose shorter directory names for the build
-+# directory and/or the installation directory.
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+shrext=.so
-+
-+host="$1"
-+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+# Code taken from libtool.m4's _LT_CC_BASENAME.
-+
-+for cc_temp in $CC""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-+
-+# Code taken from libtool.m4's _LT_COMPILER_PIC.
-+
-+wl=
-+if test "$GCC" = yes; then
-+ wl='-Wl,'
-+else
-+ case "$host_os" in
-+ aix*)
-+ wl='-Wl,'
-+ ;;
-+ darwin*)
-+ case $cc_basename in
-+ xlc*)
-+ wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ mingw* | cygwin* | pw32* | os2* | cegcc*)
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ wl='-Wl,'
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ wl='-Wl,'
-+ ;;
-+ newsos6)
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ case $cc_basename in
-+ ecc*)
-+ wl='-Wl,'
-+ ;;
-+ icc* | ifort*)
-+ wl='-Wl,'
-+ ;;
-+ lf95*)
-+ wl='-Wl,'
-+ ;;
-+ pgcc | pgf77 | pgf90)
-+ wl='-Wl,'
-+ ;;
-+ ccc*)
-+ wl='-Wl,'
-+ ;;
-+ como)
-+ wl='-lopt='
-+ ;;
-+ *)
-+ case `$CC -V 2>&1 | sed 5q` in
-+ *Sun\ C*)
-+ wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ wl='-Wl,'
-+ ;;
-+ rdos*)
-+ ;;
-+ solaris*)
-+ wl='-Wl,'
-+ ;;
-+ sunos4*)
-+ wl='-Qoption ld '
-+ ;;
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ wl='-Wl,'
-+ ;;
-+ sysv4*MP*)
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ wl='-Wl,'
-+ ;;
-+ unicos*)
-+ wl='-Wl,'
-+ ;;
-+ uts4*)
-+ ;;
-+ esac
-+fi
-+
-+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-+
-+hardcode_libdir_flag_spec=
-+hardcode_libdir_separator=
-+hardcode_direct=no
-+hardcode_minus_L=no
-+
-+case "$host_os" in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+esac
-+
-+ld_shlibs=yes
-+if test "$with_gnu_ld" = yes; then
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
-+ # option of GNU ld is called -rpath, not --rpath.
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ case "$host_os" in
-+ aix[3-9]*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ amigaos*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we cannot use
-+ # them.
-+ ld_shlibs=no
-+ ;;
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ interix[3-9]*)
-+ hardcode_direct=no
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ gnu* | linux* | k*bsd*-gnu)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ netbsd*)
-+ ;;
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs=no
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs=no
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ hardcode_direct=yes
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ :
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ if test "$ld_shlibs" = no; then
-+ hardcode_libdir_flag_spec=
-+ fi
-+else
-+ case "$host_os" in
-+ aix3*)
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L=yes
-+ if test "$GCC" = yes; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct=unsupported
-+ fi
-+ ;;
-+ aix[4-9]*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ else
-+ aix_use_runtimelinking=no
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+ fi
-+ hardcode_direct=yes
-+ hardcode_libdir_separator=':'
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ :
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ ;;
-+ esac
-+ fi
-+ # Begin _LT_AC_SYS_LIBPATH_AIX.
-+ echo 'int main () { return 0; }' > conftest.c
-+ ${CC} ${LDFLAGS} conftest.c -o conftest
-+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+ if test -z "$aix_libpath"; then
-+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+ fi
-+ if test -z "$aix_libpath"; then
-+ aix_libpath="/usr/lib:/lib"
-+ fi
-+ rm -f conftest.c conftest
-+ # End _LT_AC_SYS_LIBPATH_AIX.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ else
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ fi
-+ fi
-+ ;;
-+ amigaos*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs=no
-+ ;;
-+ bsdi[45]*)
-+ ;;
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec=' '
-+ libext=lib
-+ ;;
-+ darwin* | rhapsody*)
-+ hardcode_direct=no
-+ if test "$GCC" = yes ; then
-+ :
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ dgux*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ ;;
-+ freebsd1*)
-+ ld_shlibs=no
-+ ;;
-+ freebsd2.2*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ freebsd2*)
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ ;;
-+ freebsd* | dragonfly*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ hpux9*)
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ hpux10*)
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ fi
-+ ;;
-+ hpux11*)
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_direct=no
-+ ;;
-+ *)
-+ hardcode_direct=yes
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ netbsd*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ ;;
-+ newsos6)
-+ hardcode_direct=yes
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ openbsd*)
-+ if test -f /usr/libexec/ld.so; then
-+ hardcode_direct=yes
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ else
-+ case "$host_os" in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ os2*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ ;;
-+ osf3*)
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+ osf4* | osf5*)
-+ if test "$GCC" = yes; then
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ else
-+ # Both cc and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator=:
-+ ;;
-+ solaris*)
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ sunos4*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ ;;
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ ;;
-+ sysv4.3*)
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ ld_shlibs=yes
-+ fi
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator=':'
-+ ;;
-+ uts4*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+fi
-+
-+# Check dynamic linker characteristics
-+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-+# only about the one the linker finds when passed -lNAME. This is the last
-+# element of library_names_spec in libtool.m4, or possibly two of them if the
-+# linker has special search rules.
-+library_names_spec= # the last element of library_names_spec in libtool.m4
-+libname_spec='lib$name'
-+case "$host_os" in
-+ aix3*)
-+ library_names_spec='$libname.a'
-+ ;;
-+ aix[4-9]*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ amigaos*)
-+ library_names_spec='$libname.a'
-+ ;;
-+ beos*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ bsdi[45]*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ shrext=.dll
-+ library_names_spec='$libname.dll.a $libname.lib'
-+ ;;
-+ darwin* | rhapsody*)
-+ shrext=.dylib
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ dgux*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ freebsd1*)
-+ ;;
-+ freebsd* | dragonfly*)
-+ case "$host_os" in
-+ freebsd[123]*)
-+ library_names_spec='$libname$shrext$versuffix' ;;
-+ *)
-+ library_names_spec='$libname$shrext' ;;
-+ esac
-+ ;;
-+ gnu*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $host_cpu in
-+ ia64*)
-+ shrext=.so
-+ ;;
-+ hppa*64*)
-+ shrext=.sl
-+ ;;
-+ *)
-+ shrext=.sl
-+ ;;
-+ esac
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ interix[3-9]*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ library_names_spec='$libname$shrext'
-+ case "$host_os" in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
-+ *) libsuff= shlibsuff= ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ linux*oldld* | linux*aout* | linux*coff*)
-+ ;;
-+ linux* | k*bsd*-gnu)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ knetbsd*-gnu)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ netbsd*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ newsos6)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ nto-qnx*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ openbsd*)
-+ library_names_spec='$libname$shrext$versuffix'
-+ ;;
-+ os2*)
-+ libname_spec='$name'
-+ shrext=.dll
-+ library_names_spec='$libname.a'
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ rdos*)
-+ ;;
-+ solaris*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ sunos4*)
-+ library_names_spec='$libname$shrext$versuffix'
-+ ;;
-+ sysv4 | sysv4.3*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ sysv4*MP*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+ uts4*)
-+ library_names_spec='$libname$shrext'
-+ ;;
-+esac
-+
-+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-+
-+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-+
-+# How to pass a linker flag through the compiler.
-+wl="$escaped_wl"
-+
-+# Static library suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally "so").
-+shlibext="$shlibext"
-+
-+# Format of library name prefix.
-+libname_spec="$escaped_libname_spec"
-+
-+# Library names that the linker finds when passed -lNAME.
-+library_names_spec="$escaped_library_names_spec"
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator="$hardcode_libdir_separator"
-+
-+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct="$hardcode_direct"
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L="$hardcode_minus_L"
-+
-+EOF
@@ -1,2 +1,2 @@
# From http://www.gnu.org/software/classpath/announce/20090205.html
-sha1 1d6e8d1b3542a35bbd1013c61fab3cfae083decb classpath-0.98.tar.gz
+sha256 f929297f8ae9b613a1a167e231566861893260651d913ad9b6c11933895fecc8 classpath-0.99.tar.gz
@@ -4,21 +4,20 @@
#
################################################################################
-CLASSPATH_VERSION = 0.98
+CLASSPATH_VERSION = 0.99
CLASSPATH_SITE = $(BR2_GNU_MIRROR)/classpath
CLASSPATH_CONF_OPTS = \
--disable-examples \
- --disable-plugin \
--disable-rpath \
--disable-Werror \
--disable-gconf-peer \
- --disable-tools
+ --disable-gjdoc
+ --enable-tools
# classpath assumes qt runs on top of X11, but we
# don't support qt4 on X11
CLASSPATH_CONF_OPTS += --disable-qt-peer
CLASSPATH_DEPENDENCIES = host-pkgconf
-CLASSPATH_AUTORECONF = YES
CLASSPATH_LICENSE = GPLv2+ with exception
CLASSPATH_LICENSE_FILES = COPYING
Drop both patches since they are included upstream. We don't need to autoreconf now. Note: classpath 0.99 has a bug in it's autoconf scripts, such that configure always fails when specifying --disable-tools[1]. We enable these for now. Also explicitly disable GJDoc generation, as this defaults to on now. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70660 Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com> --- package/classpath/0001-fix-gmp-include.patch | 46 -- package/classpath/0002-add-config-rpath.patch | 680 -------------------------- package/classpath/classpath.hash | 2 +- package/classpath/classpath.mk | 7 +- 4 files changed, 4 insertions(+), 731 deletions(-) delete mode 100644 package/classpath/0001-fix-gmp-include.patch delete mode 100644 package/classpath/0002-add-config-rpath.patch